NEW
Font size
Worksheets776 Workshop methods and processes
Total questions: 32
Worksheet time: 16mins
Which Personal Protective Equipment (PPE) is most appropriate to use when using a pillar drill?
Gloves.
Goggles.
Hard hat.
Ear defenders.
A measurement is stated as 2 ± 0.5 mm. What reading is outside of this tolerance
1.4 mm.
1.9 mm.
2.0 mm.
2.4 mm.
Which one of the following can be used to prevent nuts and bolts vibrating loose
A flat washer.
A crush washer.
A spring washer.
A rubber washer.
Which piece of equipment is used to measure brake disc thickness?
Vernier caliper.
Dial test indicator.
Internal micrometer.
External micrometer.
What does a vehicle alternator convert?
Chemical energy into electrical energy.
Electrical energy into mechanical energy.
Mechanical energy into electrical energy.
Magnetic energy into mechanical energy.
How much current flows in a 12 volt circuit that has a resistance of 3 ohms?
4 amps.
9 amps.
15 amps.
36 amps.
What is meant by the term ‘malleability’ in reference to a metal?
It does not change shape easily.
It breaks easily when hammered into shape.
It can be heated to its shape without damage.
It can be hammered into shape without breaking.
Which vehicle components are commonly made of aluminium alloy?
Drive shafts.
Brake drums.
Road wheels.
Exhaust manifolds.
Where is the ‘B’ post positioned on a four-door car?
Between the front and rear doors.
Between the front wing and front door.
Between the rear quarter panel and tailgate.
Between the rear quarter panel and the rear door.
Which chassis type would be most common for a light vehicle?
Ladder chassis.
Tubular chassis.
Backbone chassis.
Monocoque chassis.
Which would be the correct PPE to use when sharpening a drill on a bench grinder?
Dust Mask
Safety Helmet
Ear defenders
Safety goggles
Which task would be completed with the tool shown in the image?
fit electrical terminals
fit split pins
remove circlips
remove oil seals
What type of washer is shown in the image?
tab washer
shake proof washer
spring washer
flat washer
What would the equipment shown in the image be used for?
Aligning wheels
Balancing wheels
Leveling wheels
Aligning headlamps
A metric Micrometre will measure to an accuracy to?
0.1mm
0.01
0.001
0.0001
What is the tool shown in the image?
flat file
thread file
fine file
course file
What must a metal contain to be classed as ferrous?
Iron
Brass
Copper
Aluminium
When lifting a vehicle on a 2 post ramp, what information would the technician require?
The total weight of the vehicle
The sprung weight of the vehicle
The chassis weight of the vehicle
The un-sprung weight of the vehicle
What is the resistance of a 12 volt circuit that has a current flow of 10 amps?
1.2 ohms
2 ohms
22 ohms
120 ohms
What is the meter in the image used to measure?
Amperage
Voltage DC
Voltage AC
Resistance
What are the main properties of copper?
brittle and tough
strong and hard
malleable and ductile
elastic and non conductive
Which one of the following safety features contains pyrotechnics?
crumple zone
door impact bars
steering wheel airbag
anti-lock braking system
What type of chassis is shown in the image?
ladder
monocoque
space frame
tubular
what type of chassis is shown in the image?
ladder
tubular
monocoque
space frame
What is the fastener shown in the image?
roll pin
split pin
pop rivet
split rivet
What are the regulatory requirements for the flash rate on a vehicle indicators?
25 to 50 times per minute
60-120 times per minute
125 to 150 times per minute
160 to 240 times per minute
What type of glass is used in vehicle construction
safety glass
float glass
4mm toughened
Energy efficient
What type of glass is used in a vehicle windscreen?
Laminated glass
float glass
energy efficient
tinted glass
What would you measure with this equipment?
Brake disc
Brake pipes
Brake union
flexi pipe
Where would you find the crumple zones on a car?
roof
doors
front and rear
floor
what kind of fastener is this?
anti rattle clip
Castle nut
spring clip
circlip
what is a body and chassis combined called?
tubular
ladder
monocoque
space frame
