What are the major classes of engineering materials?

What types of materials behave like iron when placed in a magnetic field?

What do you call metals reinforced by ceramics or other materials, usually in fiber form?

What is a combination of one or more metals with a nonmetallic element?

Polymer comes from Greek words “poly” which means “many” and “meros” which means

The engineering materials known as “plastics” are more correctly called ____________.

What is a combination of two or more materials that has properties that the components materials do not have by themselves?

What is a reference sheet for the elements that can be used to form engineering materials?

What physical property of a material that refers to the point at which a material liquefies on heating or solidifies on cooling?

What physical property of a material that refers to the temperature at which ferromagnetic materials can no longer be magnetized by outside forces?

What physical property of a material refers to the amount of weight gain (%) experienced in a polymer after immersion in water for a specified length of time under a controlled environment?

What physical property of a material that refers to the rate of heat flow per unit time in a homogenous material under steady-state conditions per unit are, per unit temperature gradient in a direction perpendicular to area?

What physical property of a material refers to the highest potential difference (voltage)that an insulting material of given thickness can withstand for a specified time without occurrence of electrical breakdown through its bulk?

What physical property of a material refers to the ratio of the amount of heat required to raise the temperature of a unit mass of a substance 1 degree to the heat required to raise the same mass of water to 1 degree.

What physical property of a material refers to the temperature at which a polymer under a specified load shows a specified amount of deflection?

What mechanical property of a material refers to the nominal stress at fracture in a tension test at constant load and constant temperature?

What mechanical property of a material refers to the resistance to plastic deformation?

What parameter is defined as the temperature at which the toughness of the material drops below some predetermined value, usually 15ft-lb?

What is obtained by repeatedly loading a specimen at given stress levels until it fails?

What dimensional property of a material refers to the deviation from edge straightness?

What dimensional property of a material refers to a wavelike variation from a perfect surface, generally much wider in spacing and higher in amplitude than surface roughness?

Wood is composed of chains of cellulose molecules bonded together by another natural polymer called ________.

What is a polymer production process that involves forming a polymer chain containing two different monuments?

What is the generic name of class of polymer which is commercially known as “nylon”?

By definition, a rubber is a substance that has at least _____ elongation in tensile test and is capable of returning rapidly and forcibly to its original dimensions when load is removed.

What is a method of forming polymer sheets or films into three-dimensional shapes in which the sheet is clamped on the edge, heated until it softens and sags, drawn in contact with the mold by vacuum, and cooled while still in contact with the mold?

What is a process of forming continuous shapes by forcing a molten polymer through a metal die?

What chemical property of a material which refers to its ability to resist deterioration by chemical or electrochemical reactions with environment?

What refers to the tendency for polymers and molecular materials to from with an ordered, spatial, three-dimensional arrangement of monomer molecules?

What is the amount of energy required to fracture a given volume of material?

What mechanical property of a material which is a time-dependent permanent strain under stress?

What refers to the stress at which a material exhibits a specified deviation from proportionality of stress and strain?

The greatest stress which a material is capable of withstanding without a deviation from acceptable of stress to strain is called _______.

What is the maximum stress below which a material can theoretically endure an infinite number of stress cycles?

What is a substance that attracts piece of iron?

Which of the following is a natural magnet?

What is the resistance of a material to plastic deformation?

Which of the following materials has permeability slightly less than that of free space?

What materials has permiabilities slightly greater than of free space?

Which of the materials have very high permiabilities?

What is the defined by ASTM as a material that contains as an essential ingredient an organic substance of large molecular weight, is solid in its finished state, and some stage in its manufactured or in its processing into finished articles, can be shaped by flow?

Some polymetric materials such as epoxies are formed by strong primary chemical bonds called ________.

What do you call a polymer without additives and without blending with another polymer?

A large molecule with two alternating mers is called as _______.

What term is used to describe a polymer that has rubberlike properties?

What is defined as an alloy of iron and carbon, with the carbon being restricted within certain concentration limits?

What is the most popular steel refining process or technique which involves casting of steel from the BOF or electric furnace into cylindrical ingots?

In what special refining process of steel where molten metal is poured down a tundish (chute) into an ingot mold?

What type of steel has carbon as its principal hardening agent?

What type of steel has 0.8% carbon and 100% pearlite?

What group of steel are water-hardened tool steels?

What group of steels are molybdenum high-speed steels?

Steels that are used for axles, gears, and similar parts requiring medium to high and strength are known as?

Galvanized steel are steel products coated with _________.

What ASTM test for tension is designated for plastics?

What ASTM test for compression is designated for plastic?

What ASTM test for shear strength is designated for plastics?

What is the ASTM tension testing designation for standard methods for steel products?

Low-quality steels with an M suffix on the designation intended for non-structural application is classified as ____________.

The use of acids to remove oxides and scale on hot-worked steels is known as_______.

What is the purpose of molybdenum in steel alloying?

Which of the following statements is NOT true?

What prefix in steel identification means composition varies from normal limits?

What is prefix in steel identification means it is made in an electric furnace?

What letter suffix steel identification means that it is steel with boron as an alloying element?

What refers to the tin mill steel, without a coating?

What combination of elements has high electrical resistance, high corrosion resistance, and high strength at red hear temperatures, making it useful in resistance heating?

A steel cannot qualify for stainless prefix until it has at least how many percent of chromium?

Which of the following cast irons is a high-carbon, iron-carbon-silicon alloy?

Which of the following cast irons is a high-carbon-silicon alloy?

Which of the following cast irons is heat-treated for ductility?

Which cast iron is hard and wear resistant?

What is considered as the general purpose oldest type and widely used cast iron?

What is the effect if manganese in cast iron?

What is the effect of aluminum in cast iron?

What is the effect of silicon in cast iron?

Iron is said to be abundant in nature. About how many percent of the earth’s crust is iron?

What is the advantage of quench hardening?

What is the lowest-temperature diffusion-hardening process and does not require a quench?

The following statements are true except one. Which one?

Which of he following is a requirement for hardening a steel?

What field of study encompasses the procurement and production of metals?

What do you call earth and stone missed with the iron oxides?

What is a coal that has been previously burned in an oxygen-poor environment?

What is the most common alloying ingredient in copper?

What refers to the casehardening process by which the carbon content of the steel earthe surface of a part is increased?

What is the process of heating a hardened steel to any temperature below the lowercritical temperature, followed by any desired rate of cooling?

What is defined as an intimate mechanical mixture of two or more phases having a definite composition and a definite temperature of transformation within the solid state?

What is the most undesirable of all the elements commonly found in steels?

What is a method of casehardening involving diffusion in which the steel to becase hardened is machined, heat-treated, placed in an air-tight box and heated to about1000oF?

What typical penetrator is used in Brinell hardness test?

What is the ratio of the maximum load in a tension test to the original cross-sectional area of the test bar?

What is the ratio of stress to strain in a material loaded within its elastic ranger?

What is a measure of rigidity?

In tensile testing, the increase in the gage length measured after the specimen fractures, within the gage length is called _______.

What impurity in steel can cause “red shortness”, which means the steel becomes unworkable at high temperature?

What is a process of producing a hard surface in a steel having a sufficiently high carbon content to respond to hardening by a rapid cooling of the surface?

What is the common reinforcement for polymer composites?

Which of the following fluids conducts electricity?