wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

carpentry unit 1

Total questions: 38

Worksheet time: 19mins

Name
Class
Date
1.

Employees need to report injuries only if they think they need to seek medical attention.

a)

True

b)

False

2.

Who should you notify right away about an accident?

a)

The immediate supervisor.

b)

The government’s Health and Safety Inspection Service.

c)

The medical department.

3.

During the accident investigation, we should ______

a)

Take photos.

b)

Gather witness statements.

c)

Collect any physical evidence.

d)

All of the above

4.

Pascals Law states....

a)

A fluids Kinetic Energy is Mass x Velocity

b)

Fluids energy changes when the pipes area changes

c)

Pressure applied to a fluid is transmitted in all directions

d)

If theres no pressure gradient over distance, no flow occurs

5.

Kinetic Energy is....

a)

the energy in a system in the form of Pressure

b)

the energy in a system due to Velocity

c)

the energy in a system due to Mass

d)

the energy in a system due to Force

6.

Viscosity...

a)

is a measure of a fluids resistance to flow

b)

index range is from 0 - 100

c)

which is too high results in an increase in leakage rate

d)

is measured in m/s

7.

Pascals Law states....

a)

A fluids Kinetic Energy is Mass x Velocity

b)

Fluids energy changes when the pipes area changes

c)

Pressure applied to a fluid is transmitted in all directions

d)

If theres no pressure gradient over distance, no flow occurs

8.

Bernoulli's Principle states....

a)

A fluids energy changes when cross sectional area changes

b)

If theres no pressure gradient over distance, no flow occurs

c)

Pressure applied to a fluid is transmitted in all directions

d)

A fluids Potential Energy is Mass x Velocity

9.

Kinetic Energy is....

a)

the energy in a system in the form of Pressure

b)

the energy in a system due to Velocity

c)

the energy in a system due to Mass

d)

the energy in a system due to Force

10.

Potential Energy is...

a)

the energy in a system in the form of Pressure

b)

the energy in a system due to Velocity

c)

the energy in a system due to Mass

d)

the energy in a system due to Force

11.

Laminar flow...

a)

is the average speed of a fluids particles past a given point in time

b)

is the measure of volume of fluid passing a given point in time

c)

is when fluid moves in straight lines at low velocity

d)

is when velocity changes due to a pipes cross sectional area changing

12.

Turbulent Flow...

a)

increases the fluids viscosity

b)

is the preferred flow when flushing hydraulic systems

c)

is a high velocity flow where particles move smoothly

d)

decreases leakage rate

13.

Flow Rate is measured in

a)

Mass and Velocity

b)

Centistokes and Viscosity

c)

Metres per second

d)

Gallons per minute

14.

Water, as a hydraulic medium, ...

a)

has good lubricating properties

b)

is not easily filtered

c)

is corrosive to metal

d)

does not have a constant viscosity

15.

Oil, as a hydraulic medium, ...

a)

is not toxic

b)

is compressible

c)

is chemically stable

d)

is easily filtered

16.

Viscosity...

a)

is a measure of a fluids resistance to flow

b)

index range is from 0 - 100

c)

which is too high results in an increase in leakage rate

d)

is measured in m/s

17.

According to the US occupational safety and Health Administration (OSHA), an unplanned event that results in personal injury and/or property damage.

a)

Accident

b)

(HAZCOM)

c)

Incident

d)

safety data sheet (SDS)

18.

Capable of easily igniting and rapidly burning; used to describe a fuel with a flash point at, or above 100 degrees F (38degrees celsius)

a)

Flammable

b)

combustible

c)

Hydraulic

d)

Ground fault

19.

A person who is capable of identifying existing and predictable hazards in the surrounding or working conditions that are unsanitary, hazardous, or dangerous to employees, and who has the authorization to take prompt corrective measures to eliminate them

a)

Hazard communications standard

b)

Competent person

c)

Personal protective office

d)

safety officer

20.

a work area large enough for a person to work but arranged in such a way that an employee must physically enter the space to perform the work. a confined space has a limited or restricted means of entry and exit. It is not designed for continuous work.

a)

Tanks, vessels, silos, pits, vaults, and hoppers are examples of a confined space

b)

Carports and garages are examples of a confined space

c)

workshops and factories are examples of confined spaces

d)

homes and businesses are examples of confined spaces

21.

What is synonymous with combustible

a)

flammable

b)

Hydraulic

c)

Respirator

d)

pneumatic

22.

Incidental grounding of a conducting electrical wire

a)

Trench

b)

Ground Fault

c)

Hydraulic

d)

combustible

23.

Powered by fluid under pressure

a)

Pneumatic

b)

respirator

c)

Hydraulic

d)

PPE

24.

Powered by air pressure

a)

Pneumatic

b)

Respirator

c)

trench

d)

hydraulic

25.

The occupational safety and health administration standard that requires contractors to educate employees about hazardous chemicals on the job site and how to work with them safely.

a)

HAZCOM

b)

SDS

c)

PPE

d)

OSHA

26.

per the US occupational safety and health administration (OSHA) an unplanned event that does not result in personal injury but may result in property damage or is worthy of recording

a)

Incident

b)

accident

c)

safety culture

d)

Management system

27.

the organization of the company's management, including, reporting procedures, supervisory responsibility, and administration

a)

Hazard communication standard

b)

Safety data sheets

c)

management system

d)

OSHA

28.

an agency of the US Department of labor. Also refers to the occupational safety and health act of 1970, a law that applies to more than 111 million workers and 7 million job sites in the United States

a)

OSHA

b)

SDS

c)

PPE

d)

HAZCOM

29.

Equipment or clothing designed to prevent or reduce injuries

a)

Personal protective equipment

b)

Uniform

c)

staff safety gear

d)

SDS

30.

Powered by air pressure, such as a pneumatic tool

a)

Pneumatic

b)

respirator

c)

hydraulic

d)

HAZCOM

31.

A device that provides clean, filtered air for breathing, no matter what is in the surrounding air.

a)

Pneumatic tool

b)

re-breather

c)

Respirator

d)

air filter

32.

The culture is created when the whole company sees the value of a safe work environment

a)

Safety dance

b)

SDS

c)

safety culture

d)

Culture club

33.

a document that must accompany any hazardous substance. The SDS identifies the substance and gives the exposure limit, the physical and chemical characteristics, the kind of Hazzard it presents, the precautions for safe handling in use, and the specific control measures.

a)

subset data subsidy

b)

subsidy documentation subset

c)

safety documentation

Standardization

d)

Safety data sheet

34.

a narrow excavation made below the surface of the ground that is generally deeper than it is wide, with a maximum width of 15 feet (4.6m)

a)

Levi

b)

Trench

c)

Ditch

d)

canal

35.

what are the four leading causes of death in construction

a)

Stupidity carelessness disorganization horse play

b)

Falls

struck by objects electrocution and caught in between

c)

Electrocution,

fire

poisoning

tool mishap

d)

Sleeping with your best friend's girl fire

falls

electrocution

36.

the person primarily responsible for your safety is

a)

Your foreman

b)

your instructor

c)

Yourself

d)

Your employer

37.

the color commonly used for informational signs is

a)

Green

b)

red

c)

Yellow

d)

blue

38.

the SDS for any chemical used at the job site must be available

a)

At the job site

b)

online

c)

At the Contractor's office

d)

At the nearest hospital