WorksheetsConduct Work at Height Training (CWAH)
Total questions: 20
Worksheet time: 10mins
How to check the validity of the harness?
A. Refer to the expiry date mention in the harness.
B)Refer to the manufacturing date in the harness and verify with the manufacturer certificate.
C) If the harness looks ok it can be used very long
D) Refer to our company procedures
When you need a professional engineer to certify the anchorage point?
A. All anchorage points need PE Certificate
B. Whenever any doubt in the fall arrest capability
C. Whenever it is used for industrial rope access
D. B and C
By avoiding work at heights we are applying _________.
A. Substitution
B. Elimination
C. Engineering Control
D. All of the above
A person is called as competent person when he has training and (a) .
As per general provision regulations, a Safety harness must be worn above (a) m height when there is no possibility of edge protection.
Who is responsible to ensure that the employees working at height must have adequate training and supervision?
A.Supervisor
B. Engineer
C. Occupier
D. Employer
Who is responsible for providing all resources for fall prevention in the work place?
A. Occupier
B. Manager
C. Supervisor
D. Employer
The risk level can be estimated by
A. Hazard & Risk
B. Severity & Likelihood
C. Safe & Unsafe Acts
D. Bad & Good practice
What is considered Hazardous Work At Height?
A. When you are working at a height
B. When you are working at a height of more than 2M and there is a possibility of fall.
C. When you are working at a height of more than 3M and there is a possibility of fall.
D. Changing a light bulb at the 7th floor of the office
Falling from height is defined as ___________
A) Likelihood
B) Severity
C) Hazard
Fall Prevention system is
A. System designed to arrest a fall
B. System designed to eliminate the fall
Under the WSH Act which of the following is not the workplace?
A. A worker doing plastering work from a scaffold
B. A domestic worker standing on a ladder to clean the kitchen lights
C. A maintenance worker servicing the air con
What system is preferred when cleaning the facade window?
A. Travel Restraint system
B. Fall arrest system
C. Rope access system
D. None of the above
_________________can be used to secure the harness when working at heights
A. Body Harness
B.Anchor Device
How many people can use a vertical lifeline at any onetime?
A) 2 people
B) 5 people
C) Depends on the design
D) Only 1 person
How we can maintain 100% tie-off while working at heights?
A) Ensure the snap hooks are secured to the safety harness
B) Ensure at least one snap hook is secured all the times to a safe anchor point
C) Remove both hooks and walk in the roof
What system is preferred when working near the edge of the building??
a. Work positioning system
b. Fall arrest system
c. Travel Restraint system
d. Rope access system
The condition that poses harm or adverse health effects to a person at the workplace is called as
a. Likelihood
b. Hazard
c. Severity
d. Risk
When installing a temporary anchor on a
vertical ladder what system you recommend?
A) I recommend a Travel restraint system as it restraint the people
B) I recoomend Work Positioning System as I need to use both hands.
C) I recommend safety belt to arrest the fall
A worker fell from height and rescued from the lifeline. The safety harness and lifeline can be ____________________.
A. Can be used if there is no damage in the harness
B. Can use after the repair of the harness
C. cannot use it again. Must be removed from service.
