NEW
Font size
WorksheetsAg woods 2025 Quiz 6
Total questions: 50
Worksheet time: 17mins
Name the following tool?
Tri-square
Combination Square
Framing Square
Speed Square
What is the Purpose of the Department of Labor and OSHA?
Create regulations for private industries to follow
To make working conditions better for workers
To test products created to see if they are safe
To allow for a free market for all companies
Which below is a English standard unit of measurement to measure how long a drive way is?
Millimeter
Centimeter
Inches
Feet
Which of the following is considered PPE?
Safety Glasses
tight fitting shirt
ear plugs
All of these
Which below are units of measure within the Metric System?
Inches, Millimeters and Yards
Millimeter's, Grams, and Kiloliters
Feet, Yards and Miles
Kilograms, Ounces, Pounds
The following tool is called a:
Band Saw
Power Miter Box Saw
Scroll Saw
Jig Saw
In terms of sandpaper; 220 grit is very__________
What piece of PPE (personal protective equipment) should you ALWAYS wear when you're in the shop?
Earplugs
Safety Glasses
Gloves
Work Apron
Which sander below is used to remove a lot of material from the face of a board in a short amount of time?
pad
orbital
palm
belt
You need 2 boards for a bird house. The dimensions are 1' x 1' x 1" for each side. How many board feet will you need?
2 Board feet
1 Board foot
8 Board feet
14.5 Board Feet
Diseases and Defects can affect timbers:
Strength and Appearance
Appearance and Length
Weight
Length
Length and Weight
What is the name of this Defect?
Bowing
Crook
Twisting
Indenting
Which of the answers below are wood defects in lumber?
Splitting or Checking
Grain of the wood
Length
Width
Name the following tool?
Tri-square
Combination Square
Framing Square
Speed Square
What is the length of the table to the nearest feet and inches?
4' - 2"
5' - 1"
5' - 3"
5' - 4"
cordless drill
bandsaw
drillpress
workbench
After the drilling is finished, which of the following should be completed first __________.
turn off the drill press
remove the drill bit from the chuck
remove the work from the drill press vise
none of the above should be done first
Which clothing item is not safe to wear while working on the drill press.
short sleeve shirt
sneakers
hooded sweatshirt
t-shirt
You are allowed to drill a hole while holding the wood off or above the table.
True
False
It is safe to use clamps to hold down your wood while drilling with the drill press.
True
False
What does the subject of pneumatics study ?
The study of converting wind energy into electrical energy
The study of compressed gas energy converting to mechanical energy
The study of liquid energy converting to mechanical energy.
Non of the above
When using the drill press, it is necessary to:
Tighten bits in the chuck with your hands only
Turn on the machine with the chuck key inserted into the chuck
tighten bits with the chuck key before operation
All of the above
Which determines if a bit can be used in a particular drill?
length
shank size
weight
Size of the base
Name these two parts of a drill press?
Drill chuck/Chuck key
Drill shank/Chuck key
Drill Key/Chuck shank
Drill chuck/ Shank key
Which part of the drill bit allows the waste to be removed during drilling?
Flutes
Shank
Body
Land
Convert 3'-2" to inches
42"
38"
82"
32"
You need 6 boards for a bird house. The dimensions are 1' x 1' x 1" for 2 sides, the top and bottom are 6" x 6" x 1". The back is 6" x 6" x 1" and the front is 1' 6" x 1' 6" x 1". How many board feet will you need?
3 Board feet
1 Board foot
10 Board feet
14.5 Board Feet
Which below shows bowing?
What is the actual size of a standard 2 x 6 that you would buy a HomeDepot?
2' x 6'
1 1/2" x 6'
1 1/2" x 5 1/2"
1 1/2" x 6"
Which sander below is best for outside curves?
Palm Sander
Belt Sander
Drum Sander
Disc Sander
Which wood joint below is a grove on the end of a board for another board to attach?
Dado
Rabbit
Dovetail
Mortise
Which wood joint below is a grove in the middle of a board for another board to attach?
Dado
Rabbit
Dovetail
Mortise
Which type of wood below is classified as a soft wood?
Pine
oak
Maple
Walnut
What does squaring a board mean?
All sides are parallel
All sides are parallel and their corners are 90 degrees
Making a cut on the compound miter saw
Ripping a board on the table saw
Which of the following below is not a hard wood?
Spruce
Oak
Maple
Walnut
Name this joint
Finger
Dado
Half-Lap
Mortise and Tenon
Name this joint
Butt
Dado
Mortise and Tenon
Miter
Name this joint
Dado
Sliding Dovetail
Biscuit
Half-Blind Dovetail
Name this joint
Dado
Sliding Dovetail
Biscuit
Half-Blind Dovetail
Name this joint
Lap
Miter Butt
Mortise and Tenon
Dovetail
What is the name of this Defect?
Bowing
Crook
Twisting
Indenting
Name this joint
Rabbet
Dado
Lap
Miter
Name this joint
Finger
Dado
Mortise and Tenon
Miter
Why are Hardwoods more expensive than softwoods?
Supply and Demand
Softwoods don't last so they are cheaper
Hardwoods take longer to grow
Softwoods can grow in any climate
Name this joint
Dado
Biscuit
Mortise and Tenon
Miter
Name the tool shown.
Box Plane
Marking Gauge
Mortise Gauge
Jack Plane
Name this machine?
Sawbench
Planer Thicknesser
Planer
Jointer
What is the name of this shop tool?
Belt sander
Disk sander
Drum stander
Spindle sander
