WorksheetsInglés Técnico II-M - Vocabulary Units 1-2-3 (IES El Vinalopó)
Total questions: 36
Worksheet time: 18mins
Name
Class
Date
1.
is a single wire connection in which a blade is inserted into the blade's holder.
a)
blade conector
b)
utility transformer
c)
non-corrosive
d)
building code
2.
uses a V-shaped ring to attach a connector to a cable.
a)
clamp connector
b)
utility pole
c)
protection
d)
terminal block connector
3.
is something that links two pieces of electrical equipment.
a)
connector
b)
Ring terminal
c)
blade conector
d)
buried service
4.
allows for a wire to not be stripped before connecting.
a)
insulation displacement connector
b)
Service drop
c)
Right-of-way
d)
Route
5.
is used to change the direction of a wire entering an electrical box.
a)
offset connector
b)
terminal block connector
c)
buried service
d)
non-metallic tubing
6.
has one plug with prongs that isinserted into the openings of a receptor plug.
a)
plug and socket connector
b)
flexible
c)
Route
d)
electrical metallic tubing
7.
is a connector used to attach a single wire to a piece of equipment.
a)
post connector
b)
non-metallic tubing
c)
building code
d)
utility pole
8.
is a single wire connection in which a screw or bolt is inserted to make electrical contact
a)
Ring terminal
b)
blade conector
c)
moisture tight fitting
d)
conduit
9.
connects wires by using mechanical pressure instead of solder.
a)
solderless connector
b)
Service cable
c)
plug and socket connector
d)
Service lateral
10.
is the same as a ring terminal except that the metal part doesn't make a full ring
a)
spade terminal
b)
insulation displacement connector
c)
plug and socket connector
d)
utility pole
11.
is used for taps and splices in building wiring.
a)
split bolt connector
b)
Service lateral
c)
terminal block connector
d)
plug and socket connector
12.
is used to connect individual electrical wires
a)
terminal block connector
b)
spade terminal
c)
utility transformer
d)
moisture tight fitting
13.
is used to connect individual electrical wires.
a)
terminal block connector
b)
electrical metallic tubing
c)
offset connector
d)
clamp connector
14.
is a set of rules used for the structural safety of buildings.
a)
building code
b)
split bolt connector
c)
Grounded
d)
blade conector
15.
is a tube put around electrical wiring for protection and routing.
a)
conduit
b)
split bolt connector
c)
blade conector
d)
Service entrance
16.
is a type of conduit tubing made of coated steel or aluminum.
a)
electrical metallic tubing
b)
Service entrance
c)
flexible
d)
non-corrosive
17.
it can be bent in different directions.
a)
flexible
b)
plug and socket connector
c)
Ring terminal
d)
offset connector
18.
is connected with the ground.
a)
Grounded
b)
building code
c)
Service cable
d)
terminal block connector
19.
is the act of fitting an electrical appliance for use.
a)
installation
b)
buried service
c)
solderless connector
d)
flexible
20.
is a conduit made specifically to keep water out.
a)
moisture tight fitting
b)
utility transformer
c)
spade terminal
d)
Service cable
21.
If a conduit is ___________, it cannot be damaged by chemicals.
a)
non-corrosive
b)
clearance
c)
conduit
d)
aerial service
22.
is a type of conduit tubing made of plastic.
a)
non-metallic tubing
b)
Route
c)
conduit
d)
installation
23.
is the ability of a conduit to keep out certain dangers, such as a fire.
a)
protection
b)
post connector
c)
non-metallic tubing
d)
solderless connector
24.
is the specified course that a conduit goes along.
a)
Route
b)
offset connector
c)
Service drop
d)
Grounded
25.
refers to a service entrance that is installed outside a building.
a)
aerial service
b)
moisture tight fitting
c)
connector
d)
Grounded
26.
refers to a service entrance that is installed underground.
a)
buried service
b)
terminal block connector
c)
post connector
d)
spade terminal
27.
is the required distance that must be maintained between a building and a utility.
a)
clearance
b)
utility pole
c)
installation
d)
protection
28.
is a strip of land that is used by a utility company to construct and operate transmission lines
a)
Right-of-way
b)
connector
c)
electrical metallic tubing
d)
aerial service
29.
is a wire that provides a customer's property with electricity. It can be buried or aerial.
a)
Service cable
b)
non-corrosive
c)
Service entrance
d)
Ring terminal
30.
is the electrical line that runs from a buried service or an aerial service to a customer's building.
a)
Service drop
b)
Right-of-way
c)
utility transformer
d)
post connector
31.
is the place where electricity enters a building.
a)
Service entrance
b)
aerial service
c)
clamp connector
d)
clearance
32.
is a power supply that is located underground.
a)
Service lateral
b)
protection
c)
utility transformer
d)
aerial service
33.
is a large pole that is used to support overhead wires such as power lines and telephone wires.
a)
utility pole
b)
clamp connector
c)
aerial service
d)
utility transformer
34.
is a device that changes electricity from high to low voltage
a)
utility transformer
b)
installation
c)
utility pole
d)
insulation displacement connector
35.
is a large pole that is used to support overhead wires such as power lines and telephone wires.
a)
utility pole
b)
Grounded
c)
insulation displacement connector
d)
utility transformer
36.
is a device that changes electricity from high to low voltage.
a)
utility transformer
b)
solderless connector
c)
terminal block connector
d)
split bolt connector
100 %
