NEW
Font size
WorksheetsMama Bored
Total questions: 10
Worksheet time: 15mins
Which electronic component below has a dual voltage selector switch?
HDD
RAM
PSU
CPU
Which of the following can be used to encrypt all the contents on a hard drive?
VirtualizationC
Lojack
Power on Password
Bitlocker
Upon reviewing the specifications for a motherboard, you find that it uses an F CPU socket. Which manufacturer's CPUs can be used in this motherboard?
AMD
Cytrix
Intel
IBM
Which expansion slot is best for high-end dedicated video cards?
AGP
PCIe x1
PCIe x16
PCI-X
Which of the following is an advantage of purchasing a motherboard with integrated graphics and audio?
Reduced need for device drivers
Faster communication between sound and video devices
Higher-quality components
Lower overall system cost
You have a computer system with an Intel Core i3 processor that operates at 3.7 GHz. You would like to upgrade to a faster processor, but you don't want to replace the motherboard. Which of the following should you do first?
Edit the CMOS.
Read the motherboard documentation to identify which processors are supported.
Configure jumpers on the motherboard to increase the clock speed.
Check AMD website
Which of the following refers to placing two processors on a single processor chip or die?
Multi-processor
Multi-threading
Multi-core
Hyper-threading
What is a ZIF socket?
A socket with a series of pins on the bottom in concentric squares
A special socket for inserting and securing a processor
Open the computer case and look for dust buildup
A socket used to mount a video card
When you try to boot your computer, it hangs after POST. When you access the UEFI setup program, you see that the date is several years behind and the time is set to 12:01 am. What is the most likely problem?
The motherboard battery has failed
The UEFI firmware is corrupt.
The UEFI firmware is outdated.
A RAM module has become unseated from its socket.
You have just replaced the motherboard in your computer. Your computer starts, but the hard disk light does not come on while the system is booting. What should you do?
Connect the power LED to the motherboard.
Connect the hard disk LED to the motherboard.
Access the UEFI setup program, and verify the hard disk has been detected.
Replace the hard disk.
