Font size
WorksheetsFusion 360 Exam Practice
Total questions: 80
Worksheet time: 41mins
What does this hole note symbol represent?
Diameter
Depth
Countersink
Counterbore
What does this hole note symbol represent?
Diameter
Depth
Countersink
Counterbore
What does this hole note symbol represent?
Diameter
Depth
Countersink
Counterbore
What does this hole note symbol represent?
Diameter
Depth
Countersink
Counterbore
What type of hole is hole #1?
Simple through
Simple blind
Countersink through
Counterbore blind
What type of hole is hole #2?
Countersink through
Simple blind
Countersink blind
Counterbore blind
What type of hole is hole #3?
Countersink through
Simple blind
Countersink blind
Counterbore blind
What does measurement 1 represent?
Hole depth
Hole diameter
Counterbore depth
Counterbore diameter
What does measurement 3 represent?
Hole depth
Hole diameter
Counterbore depth
Counterbore diameter
What does measurement 4 represent?
Hole depth
Hole diameter
Counterbore depth
Counterbore diameter
What type of hole is hole #4?
Countersink through
Simple through
Counterbore blind
Counterbore through
What type of hole is hole #5?
Countersink through
Simple blind
Countersink blind
Counterbore blind
If you need to edit something you made 5 steps ago, what would you do?
Use Undo to go back to the step you need to change, fix the step, and then do everything else over again
Find the Feature or Sketch in the Timeline at the bottom, Right click and choose Edit
Delete the object and start over
Add a new extrude to cover up what would have changed
If you need to edit something you made 5 steps ago, what would you do?
Use Undo to go back to the step you need to change, fix the step, and then do everything else over again
Find the Feature or Sketch in the Timeline at the bottom, Right click and choose Edit
Delete the object and start over
Add a new extrude to cover up what would have changed
create sketch (kriejt skecz)
Center diameter circle (sente dajamyte serkel)
chamfer (czamfe)
circular pattern (sekjule paten)
What do I do first?
What do I AFTER I create a new component?
Where do I find the mirror, rectangular pattern, & circular pattern?
Oh no! My line isn't touching the circle. What constraint do I need?
Help! I want this construction line to be in the middle of the rectangle. What constraint do I use?
I dimensioned everything, but the shape still moves around. What constraint do I still need to do?
I want to mirror the circle. What do I need to put at the midpoint of the top line?
a line
a construction line
a construction circle
nothing
I want to mirror the circle. What do I need to put at the midpoint of the top line?
a line
a construction line
a construction circle
nothing
What constraint do I need to make a right angle here?
What constraint do I need to make a right angle here?
Where do I go if I want to edit a sketch? (choose 2!)
Right click on sketch in the tree
At the timeline on the bottom
In the create tab
In the constraints
Where do I go if I want to hide the sketch?
Where do I go if I can't find the sketch?
Where do I go if I want to hide or view the extruded body?
I created this shape and extruded. I want to create a hole in this shape. What's the first step I should do? (choose all)
create a new component
create a new sketch (right click)
create a new sketch (at the top)
extrude again
I want to project the shape on the new sketch. What letter do I type to do that? (hint! It makes a purple line)
P
Y
L
C
To create the hole in this shape, which type of extrude operation should I use?
join
cut
intersect
new body
If I want 2 extruded bodies to be attached, which extrude operation should I use?
join
cut
intersect
new body
Why can't I fillet the purple line?
They're project lines
They don't really exist
They're like construction lines
Why you crying?
The ___________ command changes the size of faces, bodies, fillets, chamfers, holes, and other geometry. The exact behavior depends on the selected geometry.
Press Pull
Fillet
Draft
Split Body
The __________ command rounds the edges of a solid body, by removing material from exterior edges or adding material to interior edges.
Chamfer
Fillet
Draft
Split Body
The ___________ command bevels the edges of a solid body, by removing material from exterior edges or adding material to interior edges.
Chamfer
Fillet
Draft
Split Body
The ___________ command bevels the edges of a solid body, by removing material from exterior edges or adding material to interior edges.
Shell
Split Face
Draft
Split Body
The _________ command applies a fixed or parting line draft angle to rotate planar faces on a solid body.
Shell
Split Face
Draft
Split Body
Which Fusion 360 feature will create the rounded corners?
Which Fusion 360 feature was used to create a 3D object from a sketch that was rotated?
extrude
revolve
shell
mirror
A solid modeling technique where geometry is subtracted from existing model geometry.
scaled drawing
subtractive modeling
orthogonal
additive modeling
A solid modeling technique where geometry is added to existing model geometry
scaled drawing
subtractive modeling
orthogonal
additive modeling
typically includes top, front, and right-side orthographic projections and an isometric view of an object
annotation
additive modeling
design intent
multiview drawing
Intersecting or lying at right angles; perpendicular.
extension lines
base view
orthogonal
object line
Lightly drawn line to guide drawing other lines and shapes.
extension lines
construction line
orthogonal
object line
A heavy solid line used on a drawing to represent the outline.
centerline
construction line
hidden line
object line
A line that defines the center of arcs, circles, or symmetrical parts. A center line is half as thick as an object line.
centerline
construction line
hidden line
object line
shows the location of a hole, cylinder, or other round features on a drawing as a pair of perpendicular lines that cross at the center of a feature.
centerline
construction line
hidden line
center mark
typically the front view in Fusion 360 or other 3D modeling software
Orthographic View
isometric view
base view
orthogonal
An object that provides information about a feature, such as the length of a wall, the diameter of a fastener, or a detail callout. These objects can include dimensions, notes, or other types of explanatory symbols.
centerline
orthogonal
standard
annotation
Something set up and established by authority as a rule for the measure of quantity, weight, extent, value, or quality.
standard
top-down design
design intent
annotation
Lines that are thin lines capped with arrowheads, which may be broken along their length to provide space for the dimension numerals.
hidden line
dimension lines
leader lines
extension lines
Line which represents where a dimension starts and stops. Always has at least an 1/8" gap between the drawing and this line
hidden line
dimension lines
leader lines
extension lines
aka 2D - A method of representing three-dimensional objects on a plane having only length and breadth. Also referred to as Right Angle Projection.
artistic sketch
aesthetic
Orthographic View
isometric view
Which Fusion 360 feature will copy an object across a plane of symmetry?
What term best describes the list of items below?
> Must be made out of 4 to 6 pieces
> Must be "interlocking"
>Part cannot extend more than 3 units in any direction
>No two parts can be the same
Client
Deliverables
Design Constraints
Problem Statement
This is a person who is trained in and uses technological and scientific knowledge to solve practical problems.
Engineer
Scientist
Technician
Designer
Which Fusion 360 feature was used to create the holes?
circular pattern
rectangular pattern
shell
offset
Which Fusion 360 feature was used to create the square pegs?
circular pattern
rectangular pattern
shell
offset
On which of these views can I create my sketch? (check all that applies)
Top View
Front View
Back View
Left Side View
Right Side View
