NEW
Font size
WorksheetsBQS401 QUIZ
Total questions: 15
Worksheet time: 6mins
Which of the following is involved in a taking-off process?
Measure dimensions from drawings
Measure dimensions and write descriptions
Write descriptions
Measure dimensions, write descriptions & squaring of dimensions
The following are the purposes of Bills of Quantities, except:
To provide a basis for tendering
to provide a basis for interim certificate
To provide a basis for valuing variations
To assist a QS to organise his work
What is the usage of Column 1 in a dimension papers?
Writing descriptions
Timesing
Squaring
Entering of dimensions
A BQ can be use to provide a basis for feedback of information for the building user. True or False?
TRUE
FALSE
Which is the correct order of dimensions as stated in SMM General Rules A.1.4?
Width-length-thickness
Height-length
Depth-width-length
Length-width-height
The following are the methids to make alterations to dimensions/items, except:
to 'nil' rhe item/description
to write the word 'nil' in the squaring column against the dimensions
'cross-out' the whole page
'cross-out' the original figures and neatly write the new figures above it
Girth calculation is usually applicable for the following items, except:
Strip foundation
External wall
Perimeter drain
Floor finishes
What is the correct maximum depth to be used if the depth of a trench excavation is 1500mm?
max depth n..e. 0.25m
max depth n.e. 2.00m
max depth n.e. 1.00m
max depth n.e. 1.50m
Which is INCORRECT about measuring Formwork?
To measure the actual surface in contact with concrete
Formwork shall be grouped according to categories
Formwork n.e. 1.00m high to be given in linear metre
Formwork to edges and faces of foundation exc. 1.00m high to be given in m3.
Excavate to reduce level is to be given in square metre. True or false?
True
False
All concrete members to be given in cubic metre.
True or False?
True
False
The following should be measured separately for Curved on Plan, except:
Brickwall
Concrete work
Trench excavation
Formwork
Horizontal DPM: if over 300mm thick to be given in m3; if not exceeding 300mm to be given in m2 and state tthe average thickness
True
False
The following should be described in brickwork, except:
height of the wall
mortar composition
thickness of wall
types of bricks
PROJECTION: when length on plan is more than 4 times of its thickness.
True or False?
True
False
