wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Design unrelated Questions

Total questions: 49

Worksheet time: 25mins

Name
Class
Date
1.

What should be the nominal thickness of the concrete hollow block unit (in meters) for the exterior walls of the duplex unit?

a)

0.20

b)

0.15

c)

0.10

d)

0.25

2.

Assuming that a firewall-quality wall thickness is required by an Owner; what should be the nominal thickness of the concrete hollow block unit (in meters) for the exterior walls of the duplex unit?

a)

0.10

b)

0.20

c)

0.25

d)

0.15

3.

What is the NET are of a Bedside Table with Drawers closed?

a)

0.20 sqm

b)

0.30 sqm

c)

0.40 sqm

d)

0.50 sqm

4.

Where is the ideal placement of the bed headboard?

a)

at a plain wall opposite to the window

b)

at a wall with fixed window

c)

at a wall with operable window

d)

at a plain wall with a toilet on the other side

5.

Which of the following is a resilient architectural flooring material for use on the duplex unit?

a)

Clay tile

b)

Vinyl strips

c)

Ceramic tile

d)

Granite tile

6.

Which of the following is NOT a hardware item?

a)

Door stop

b)

Door closer

c)

Lockset

d)

Door casing

7.

Considering a 20 sqm room, approximately how much horsepower (HP) of air-conditioning is ideal to cool the room?

a)

1 HP

b)

1.5 HP

c)

2 HP

d)

3 HP

8.

For R-1 development, what is the maximum height for a perimeter wall?

a)

2.70 m

b)

2.40 m

c)

3.00 m

d)

3.20 m

9.

Where on the 10 lots are the best sites to plant large trees that will serve as "habagat" wind buffers?

a)

North, northeast, and east perimeters

b)

West, northwest, and north perimeters

c)

East, southeast, and south perimeters

d)

West, southwest, and south perimeters

10.

Given the site orientation, from what direction shall the "easterly wind" come from?

a)

East

b)

Southwest

c)

Southeast

d)

Northeast

11.

Given the project site orientation, what are the dominant sun-paths for the property?

a)

SW to SE and NW to NE

b)

SE to NW and NE to SW

c)

SE to SW and NE to NW

d)

SW to NE and NW to SE

12.

Which of the following provisions should NOT be situated close to one another?

a)

Security quarters, locker, and shower

b)

Guest parking slots, cluster street, disabled ramps, etc.

c)

Homeowners' association office & generator room

d)

Cistern and sewage treatment plant

13.

Which of the is the best bedroom floor finish for a person with asthma?

a)

Hardwood

b)

Linoleum

c)

Vinyl

d)

Carpet

14.

For the bisecting cluster street, what paving material should be used to provide good tire traction in times of heavy rain?

a)

Cast or poured concrete

b)

Asphalt

c)

Dirt

d)

Course gravel

15.

Assuming that the project site location is 150 m away from a very high voltage transmission line, what type of building projections should not be introduced for the prototype house?

a)

Extended eaves

b)

Sun-breakers

c)

Balconies

d)

Canopy

16.

What is NOT considered a furniture item?

a)

Sofa

b)

Wall mounted flat TV

c)

Coffee table

d)

dresser

17.

Which is NOT a furnishing?

a)

Acrylic paint

b)

Ceiling fan

c)

Area rug

d)

Sectional sofa

18.

Which is not part of Architectural Interiors?

a)

Furniture

b)

Equipment

c)

Fixtures

d)

Fittings

19.

What is the best floor finish for a workshop?

a)

Rubberized paint

b)

Plain concrete

c)

Ceramic tile

d)

Engineered wood

20.

Under the NBCP, which of the following does NOT form part of the footprint of the project?

a)

Exterior walls of the building at ground floor

b)

Podium ground floor

c)

Tower ground floor

d)

Basement level

21.

Which of the following should preferably NOT be provided at the basement level of the project?

a)

Garbage chute

b)

Utility room

c)

Service stairs

d)

Fire escape stairs

22.

In terms of architectural exterior finish, which of the following material set can best convey that the project is a place for multi-storey budget residences?

a)

Substantial use of masonry and some glass

b)

Much glass, some metal, and limited masonry

c)

Some glass, plastics, and engineered stone

d)

Much glass, much metal, and some hardwood

23.

In terms of architectural exterior finishing and energy conservation, which of the following material sets is NOT a good material and finish combination for the southern face of the project?

a)

Transparent glass and dark color painted masonry

b)

Heavily tinted glass and medium color painted masonry

c)

Translucent glass and light painted masonry

d)

Transparent glass and light colored metal panels

24.

In terms of architectural exterior finishing and building insulation, which of the following is NOT a good color for the project roof deck, if introduced?

a)

Light gray

b)

Medium gray

c)

Medium blue

d)

Dark gray and Black

25.

In terms of architectural exterior finishing and building insulation, which of the following is NOT a good material and color for the project roofing?

a)

Light red polycarbonate panels

b)

Light brown metal roofing

c)

Dark green metal roofing

d)

Medium blue metal roofing

26.

To attain overall design economy and maximized structural stability, where should the perimeter beam centerlines for typical floors be aligned or positioned, in relation to the buildings perimeter column?

a)

Positioned near the column interior face

b)

Aligned with the column centerlines

c)

Positioned near the column exterior face

d)

Positioned outside the column interior face

27.

In inclement weather; what amenities should be placed at the entrance to the unit?

a)

Bigger corridor/hallway width to dry up umbrellas

b)

Built in storage to secure umbrellas and raincoats

c)

Umbrella racks near entrance

d)

Metal brackets for hanging of umbrellas

28.

When entering the unit with groceries there should be_______.

a)

a service entrance accessing directly to the kitchen

b)

connection between main entrance and kitchen should be direct as possible

c)

connection between main entrance and living area linked to kitchen as much as possible

d)

does not matter; groceries are placed in plastic bags anyway

29.

What appropriate space should be provided for the laundry drying area?

a)

Provide common drying area at rear portion of lot or at roof deck

b)

Provide balcony

c)

Provide hanging poles placed outside the window

d)

Provide portable drying pole upfront near main entrance

30.

What is the sequence of priority for the space requirements in an apartment unit?

a)

Kitchen, dining area, bedroom, living area

b)

Bed area, dining area, living area, and kitchen

c)

Bed area, kitchen, dining area, living area

d)

Living area, dining area, kitchen, and bed area

31.

What is the maximum number of elderly persons who can walk comfortably side by side on a 1.8m wide sidewalk serving the project site?

a)

4

b)

3

c)

2

d)

6

32.

If one apartment unit will be designed as PWD accessible, what shall be the minimum clear width (in meters) of its toilet?

a)

1.80

b)

1.50

c)

1.70

d)

0.90

33.

Which of the following is NOT considered a sanitary spatial provision for the project?

a)

Sump pit & sump pump

b)

Pump room

c)

STP

d)

Solid waste storage

34.

In terms of material production, which of the following flooring materials is considered to have the lowest carbon footprint?

a)

High pressure laminate flooring

b)

Baked clay tiles

c)

Hand-cut natural stone

d)

Ceramic tiles

35.

In commercial bldg. which of the following would you specify for the lobby flooring?

a)

Granite

b)

Ceramic tiles

c)

Vinyl

d)

Carpet

36.

In commercial bldg. which of the following would you specify for the Unit's Kitchen Counter?

a)

Polyethylene

b)

Granite

c)

Ceramic

d)

Marble

37.

In terms of production, transportation, and installation, which of the following ceiling materials is considered to have the highest embodied energy?

a)

Plywood

b)

Recycled cardboard eggcrate

c)

Polycarbonate sheet

d)

Gypsum board

38.

In commercial bldg. considering the building size, intended image and occupancy type, what would be the best generic main door type and material for the building?

a)

Revolving/hardwood

b)

Double sliding/steel

c)

Accordion/PVC

d)

Quadruple leaf swing/glass

39.

What type of window is not recommended for the office condominium building?

a)

Hopper

b)

Pivoted

c)

Casement

d)

Awning

40.

In a tropical country, which of the following would be the best window type for a building?

a)

Awning

b)

Fixed

c)

Sliding

d)

Jalousie

41.

Which of the following windows would be the easiest to clean?

a)

Awning

b)

Casement

c)

Sliding

d)

Jalousie

42.

What other factor, aside from temperature, can improve the comfort level in the interior?

a)

Humidity

b)

Air movement

c)

Light

d)

All of the above

43.

Where on the Project Site is the best location of the loading dock?

a)

North yard

b)

South yard

c)

West yard

d)

East yard

44.

Which of the following EER is the most energy eficient?

a)

7.8

b)

8.3

c)

9.4

d)

10.6

45.

Which of the following is a good lighting device for a watercolor painting on the wall of the waiting area of the president's office?

a)

CFL

b)

High heat halogen lamps

c)

Low wattage track light

d)

High output spot lamp

46.

What type of lighting is used to emphasize the location of an object in the president's office?

a)

Spot light

b)

Directional light

c)

Track light

d)

Back light

47.

Which of the following is a good lighting technique for emphasizing a curved ceiling, if introduced at the lobby?

a)

Use of pendant lighting

b)

Indirect lighting at the base of the curved ceiling

c)

Direct lighting of the curved ceiling using spotlights

d)

Down lighting from the ceiling using halogen lamps

48.

What type of lighting is used to emphasize the depth of an object located at the lobby?

a)

Spot light

b)

Directional light

c)

Track light

d)

Back light

49.

Which of the following is a good general lighting color for production work areas?

a)

Warm white

b)

Cool white

c)

Yellow

d)

Daylight