Font size
S
M
L
XL
WorksheetsUNIT TEST (TLE A2)
Total questions: 52
Worksheet time: 26mins
Name
Class
Date
1.
SURNAME, GIVEN NAME M.I.
4 lines
2.
SECTION
a)
BTVTED TE 301
b)
BTVTED TE 302
3.
What tool used to establish a long straight line on a surface?
a)
Chalk line
b)
Compass
c)
Divider
d)
Meter stick
4.
What kind of materials that fine aggregates represent?
a)
Cement
b)
Coloring
c)
Gravel
d)
Sand
5.
Implements manipulated by the hands to facilitate carpentry works.
a)
Equipment
b)
Hardware
c)
Materials
d)
Tools
6.
What tool used in squaring, measuring and testing the squareness of a piece of wood?
a)
Back saw
b)
Compass saw
c)
Drill bit
d)
Try square
7.
What material is the most versatile in the construction industry?
a)
Cement
b)
Paint
c)
Sand
d)
Wood
8.
Worker is capable of reading blueprints and laying out patterns for the less-skilled tradesmen to work from.
a)
Waiter
b)
Mason
c)
Doctor
d)
Architect
9.
Where the good source of sand is coming from?
a)
Beach
b)
Riverbank
c)
Sea
d)
Swamp
10.
I. Thick lines are typically drawn with a 0.7 mm or 0.9 mm mechanical pencil. II. Thin lines are typically drawn with a 0.3 mm or 0.5 mm mechanical pencil.
a)
Statement I is correct and statement II is incorrect.
b)
Statement I is incorrect and statement II is correct.
c)
Both statements are correct.
d)
Both statements are incorrect.
11.
I. Long break lines are thick wavy freehand lines. II. Short break lines are thin straight zigzags.
a)
Statement I is correct and statement II is incorrect.
b)
Statement I is incorrect and statement II is correct.
c)
Both statements are correct.
d)
Both statements are incorrect.
12.
Is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc.
a)
Waiter
b)
Mason
c)
Carpenter
d)
Architect
13.
I. Construction line is used in making guide lines for lettering. II. Construction line is drawn very light and thin.
a)
Statement I is correct and statement II is incorrect.
b)
Statement I is incorrect and statement II is correct.
c)
Both statements are correct.
d)
Both statements are incorrect.
14.
I. Precedence of lines is used when lines overlapped in a drawing. II. It is common for line types to coincide or overlap in a drawing.
a)
Statement I is correct and statement II is incorrect.
b)
Statement I is incorrect and statement II is correct.
c)
Both statements are correct.
d)
Both statements are incorrect.
15.
I. In the precedence of line, the highest rank is hidden line. II. And the lowest rank is sectioning or section lines.
a)
Statement I is correct and statement II is incorrect.
b)
Statement I is incorrect and statement II is correct.
c)
Both statements are correct.
d)
Both statements are incorrect.
16.
What type of fastener that is typically made of metal that is used to fasten materials?
a)
Nail
b)
Pin
c)
Stick
d)
Screw
17.
What type of screws is used for all sorts of material including wood, metal and brick?
a)
Countersunk Screw
b)
Self-tapping Screw
c)
Round Head
d)
Panel Pin
18.
Why nails become better than screws?
a)
It has beautiful thread
b)
It is for heavy duty works
c)
It is flexible and easy to insert
d)
It has more holding power
19.
It is an equipment to carrying out tools.
a)
Wheel Cart
b)
Wheel Barrow
c)
Wheel Barrowed
d)
Wheel Carte
20.
A nail having a tapering rectangular form with a blunt point, made by cutting from a thin rolled sheet of iron or steel.
a)
Brad Nail
b)
Clout Nail
c)
Panel Pin
d)
Steel Cut Nail
21.
What tool is made up of wood or metal and it helps the chisel from breaking?
a)
Brick
b)
Hammer
c)
Pick
d)
Wooden Mallet
22.
A generally T-shaped hand tool used for praying, break out stone, and for hard ground.
a)
Hammer
b)
Metal Pick
c)
Pick
d)
Wooden Mallet
23.
What is the law for upgrade and update the level of competencies of construction workers?
a)
Section 15 Construction Workers Skills Certificates
b)
Department Order 13 Series of 1998
c)
Section 12 Safety and Health Information
d)
Section 13 Extend relevant assistance to construction sector organizations
24.
This type of fire extinguisher is used on fires involving cooking media (fats, grease, and oils)
a)
Class A
b)
Class B
c)
Class C
d)
Class K
25.
What is the law for guidelines governing occupational safety and health in the construction industries?
a)
Section 15 Construction Workers Skills Certificates
b)
Department Order 13 Series of 1998
c)
Section 12 Safety and Health Information
d)
Section 13 Extend relevant assistance to construction sector organizations
26.
This type of fire extinguisher is used on fires that involve live electrical equipment, which require the use of electrically nonconductive extinguishing agents.
a)
Class A
b)
Class B
c)
Class C
d)
Class K
27.
This is the term applied to unplanned or un-dressed lumber.
a)
Rough Lumber
b)
S2-S4’s Lumber
c)
Dressed Lumber
d)
Surface Lumber
28.
This type of fire extinguisher is used for flammable liquid and gas fires such as oil, gasoline, etc.
a)
Class A
b)
Class B
c)
Class C
d)
Class K
29.
This is the basic ingredient of concrete; it is creating a paste with water that binds with sand and rock to harden.
a)
Portland cement
b)
Fine aggregates
c)
Coarse aggregates
d)
None of the above
30.
This is defined as the art and science of installation of fixtures and other apparatus to convey and supply water in buildings.
a)
Wiring
b)
Electrician
c)
Plumbing
d)
Plumber
31.
This wood is suitable for building or carpentry and for various engineering and other purposes.
a)
Plywood
b)
Timber wood
c)
Hardwood
d)
Scrap wood
32.
This line is represented by a medium thick line of short dashes (2-3mm long) with space between each dash (1-2mm wide) that correspond to the features that cannot be seen in the current view.
(a)
33.
What can be used that can put out a fire?
a)
Dust
b)
Cooking Oil
c)
Pasteurized can
d)
Baking soda
34.
This line is represented by a thin line composed of two long dashes and short dash drawn alternately with a Gap (at least 2mm) in between that shows the center or axis of symmetrical shapes.
(a)
35.
It is represented by a thin line of two short dashes and one long dash that corresponds to the position/s of part of an object that moves or moveable feature in its different positions.
(a)
36.
This line is represented by a thick line drawn in freehand to represent the details of part that has been broken out or cut off.
(a)
37.
(a)
38.
It is also called as OBJECT LINE. It is represented by a thick and continuous line (0.5-0.6mm) that shows the features that can be seen in the outline current view.
(a)
39.
(a)
40.
(a)
41.
A lightweight and slender nail that provide extra strength when fastened in place and generally used to attach skirting or back boards to cabinets, wardrobes and joinery work.
(a)
42.
Tools is manipulated by the hands to facilitate carpentry works.
a)
TRUE
b)
FALSE
43.
It is a cross between a countersunk screw and round head screw because it has both features.
(a)
44.
Drywall screw and Countersunk head screw have the same flat head shape.
a)
TRUE
b)
FALSE
45.
Wood is flexible materials in construction industry.
a)
TRUE
b)
FALSE
46.
The used of the screw driver is in fastening nails to wood.
a)
TRUE
b)
FALSE
47.
Nathan measured the height of their window sills and he used the gauge rod. Did he use the right tool?
a)
TRUE
b)
FALSE
48.
Round head screw and raised head screw are good in drive performance.
a)
TRUE
b)
FALSE
49.
Back saw is used for cutting wood along the grain.
a)
TRUE
b)
FALSE
50.
Screws is a simple machine.
a)
TRUE
b)
FALSE
51.
I used the mastic trowel to fill and shape the in between of the bricks in our house.
a)
TRUE
b)
FALSE
52.
Square shovel is designed for scooping, and they often have a slightly concave blade, like a squared-off spoon.
a)
TRUE
b)
FALSE
Reset
