wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Phil. Electrical Code provisions PEC-1 "Electrical Installation

Total questions: 20

Worksheet time: 10mins

Name
Class
Date
1.

R.A. 7920 formerly known as R.A. 184 is also known as:

a)

National Building Code

b)

Fire code of the phils

c)

structural code of the phils.

d)

New Electrical Eng'g Law of the phils.

2.

Is an act providing for a more responsive and comprehensive regulation for the practice ,licensing and registration of electrical engineers and electricians.

a)

R.A. 7920

b)

P.D. 1185

c)

P.D. 1096

d)

P.D.1965

3.

In PEC provision, which characterize by the use of the word "shall" means it is...

a)

advisory

b)

regulatory

c)

mandatory

d)

derogatory

4.

PEC provisions consist of rules intended to make use of electricity safe for:

a)

safety for people

b)

property

c)

environment

d)

both A & B

5.

Rule provision of PEC that characterized by the use of word "SHOULD" stated as recommendation but not required

a)

advisory rule

b)

mandatory rule

c)

obligatory rule

d)

company rule

6.

The objective of the PEC is to...

a)

have standard safe use of electricity

b)

adequacy in compliance with provisions of the code

c)

Both A & B

d)

B only

7.

Government Authorities mandated to implement the PEC provisions....

a)

office of the building official

b)

office of the city electrician

c)

office of the municipal electrician

d)

regional office of DOLE

8.

PEC provisions covers installed electrical conductors, including optical fiber cable within or on, to or from...... except

a)

public and private buildings

b)

electrical generating plants

c)

offshore facilities

d)

aircraft, motor vehicles and railway rolling stocks

9.

Electrical Permits and inspection certificates may not be required before undertaking any electrical installation except.....

a)

Installation of an electrical portable equipment rated not more than 1,200 volt ampere

b)

Reconnection of disconnected service due to non-payment of electric bill

c)

Change of occupants for a period of one year

d)

electrical installation of mobile homes, travel trailers and recreational vehicles

10.

As a general rule building structure shall be supplied by only one service. But the PEC could allow to provide more than one service. Which of the following situation below did not qualify......

a)

Fire pump where a separate service is required

b)

For emergency electrical system where a separate service is required

c)

if it is multiple occupancy building

d)

single occupancy residential building

11.

which of the following is not a PEC requirement for an electrical permit application

a)

An application form ( DPWH form No. 77-001-E ) shall be accomplished signed by a duly registered professional electrical Engineer or registered master electrician if load will not exceed 4000 VA ,230 volts

b)

five sets of plans and specifications bearing the signature and seal of the responsible professional

c)

five sets of sketches and bill of materials prepared and signed by the responsible registered electrical engineer or master electrician

d)

five sets of plans and specifications bearing the signature and seal of the Mechanical engineer

12.

Two or more service supply lines is allowed only if.....

a)

The capacity requirements are in excess of 2,000 amperes at a supply voltage of 600 volts or less

b)

Where the load requirements of a single -phase installation are greater than the serving agency normally supplies through one service

c)

Building of large area equivalent to 10,000m2 or more

d)

all of the above

13.

The minimum size of service drop conductors shall be....

a)

Shall not smaller than 8mm2 cooper conductor or 14 mm2 aluminum or copper clad aluminum

b)

Shall not smaller than 5.5mm2 cooper conductor or 14 mm2 aluminum or copper clad aluminum

c)

Shall not smaller than 3.5mm2 cooper conductor or 14 mm2 aluminum or copper clad aluminum

d)

hall not smaller than 2.0mm2 cooper conductor or 14 mm2 aluminum or copper clad aluminun

14.

According P.D. 1096 the National Building code of the phils. Plans and electrical permits may not be required for traditional building made up of indigenous materials that cost not more than._______?

a)

15,000.00 and below

b)

16,000.00

c)

17,000.00

d)

18,000.00

15.

Overhead service drop conductors passing above roofs of a building should have a minimum vertical clearance of not less than _______mm from the roof.

a)

2,000 mm

b)

3,000 mm

c)

2,500 mm

d)

3,500 mm

16.

The minimum overhead service drop conductors vertical clearance from ground over residential property and driveways and those commercial areas not subject to truck traffic is _________?

a)

6,400 mm

b)

4,600 mm

c)

4000 mm

d)

4,500 mm

17.

The minimum overhead Service drop vertical clearance from ground at the electric service entrance to buildings, or at the drip loop of the building electric entrance or above areas of sidewalk

a)

2,900 mm

b)

3,200 mm

c)

3,100 mm

d)

3000 mm

18.

The minimum overhead service drop conductors vertical clearance from ground over public streets, alleys ,roads, parking areas subject to traffic ,driveways on other residential property and other land traverse by vehicles.

a)

5,500 mm

b)

5,000 mm

c)

4,500mm

d)

5,400 mm

19.

A service conductor connected from the last pole or other aerial support to and including the splices if any connecting to service entrance conductors at the building or other structure is called_____?

a)

Service Entrance conductors

b)

Overhead service drop conductor

c)

Underground service lateral conductors

d)

Service bus bar conductors

20.

A type of service conductors that passes through underground between the street main , including any risers at a pole or other structure or from transformer , and the first point of any connection to the service entrance is called_____?

a)

overhead service conductors

b)

service bus bar conductors

c)

service entrance conductors

d)

underground service -lateral conductors