WorksheetsSection 2 & 3 NCCER Core
Total questions: 18
Worksheet time: 9mins
A line attached to a tool or object so the worker can pull it up after climbing the ladder or scaffold.
Excavation
Hand Line
Toeboard
Top rail
Which is not a method used to prevent walking or working surfaces incidents and accidents?
Keeping walkways clear
Running cables, extension cords and hoses overhead or through crossover plates
Running on scaffolding or work platforms
Making sure all working and walking surfaces are dry.
A vertical barrier at floor level attached along exposed edges of a platform, runway, or
ramp to prevent materials and people from falling
Scaffold
Midrail
Toeboard
Excavation
Approved eye protection must be worn:
At all times while in the shop
Only when working with material
When the sun is out
When it is raining
An anchor point
(choose all that apply)
Must equal 5,000 pounds or equal twice the intended load
Is either temporary or permanent
Located directly above the back D-ring
Be capable of supporting 2 people
Because some machines pose a threat of a "kick-back", it is important to
(choose all that apply)
Avoid standing behind material being cut
Avoid standing in any "kick-back" zone
Warn helpers and surrounding students against standing in the "kick-back" zone
Gather your friends around to watch
Why are suspension trauma straps important?
(choose all that apply)
Allows the person to stand up, allowing blood to flow to and from the extremities.
Takes weight off the person's hips and groin area
Eases the recovery process
Gives the person who fell something to keep them occupied until help arrives
Braces (wood or metal) placed diagonally from the bottom of one
rail to the top of another rail that add support to a structure.
Guarded
Hand line
Cross-bracing
Toeboard
Oily or greasy rags should be:
Rolled in a tight bundle and stored
Thrown in the trash
Placed in a metal covered container
Saved to be used in the paint room
When going up or down a ladder you always
Face away from the ladder
Face the ladder
As long as you close your eyes it does not matter which way you face
Carry several items up the ladder with you
What does a Green tag on a scaffold mean?
The scaffold is being put up or taken down
Scaffold does not meet OSHA requirements and additional safety equipment is required
Scaffold meets all of the OSHA requirements and is ready to use
Makes a nice area for you to write your name on
A support system designed to prevent a trench or excavation cave-in
Shielding
Spoil
Signaler
Shoring
To help protect against flying object hazards, which of these guidelines should you follow?
(choose all that apply)
Wear eye protection such as safety glasses, goggles or face shields where machines or tools might cause flying debris
Inspect tools and machines to ensure safety guards are in place
Make sure you are trained in the proper use of pneumatic tools
Use shielding devices such as welding screens or similar equipment to block flying debris
Machine guards are designed to
Keep hands and other body parts from coming into contact with the machine
Make it difficult to work with the machine/tool
Can be easily removed to make work go faster
Made of lightweight, easily breakable materials
Keep hands are fingers at least ____ from spinning blades and cutters
10"
3"
6"
24"
A rule stating that platforms or work surfaces with unprotected sides or edges that are 6' or higher than the ground or level below it require fall protection
6 foot rule
School policy
A good idea
Recommended
Which of the following is NOT a guideline to follow when working near moving equipment or roadway?
Maintain eye contact with the operator
Stand in a place where you can't be seen. If you can't be seen you can't be hit
Stay off equipment unless you are authorized
Never stand under loads handled by lifting equipment
A person who is responsible for directing a vehicle when the river's visions is blocked in any way
Santa Clause
Signaler
Driver
Foreman
