Font size
WorksheetsCCNA Cisco drag and drop
Total questions: 76
Worksheet time: 3hrs 54mins
(R2E).
An engineer must configure a static network route between two networks so that host A communicates with host B. Drag and drop the commands from the left onto the routers where they must be configured on the right. Not all commands are used. Router 1 R1 Router 2 R2 Router 2 R2 Router 3 R3 (a) (b) (c) (d)
DnD. Drag and drop the statements about access-point modes from the left onto the corresponding modes on the right.
It enables enhanced RFID-tag location tracking
It supports analytics for wireless performance testing
It supports real-time Wi-Fi client troubleshooting when network engineers are offsite
It provides air-quality data and interference detection across all enabled channels
It captures and forwards packets on a specific wireless channel
It supports software that analyzes wireless frames on a remote device
Organize All options into the right categories based on IPv6 address types.
provides for on-one communication
is routable and reachable via the Internet
confined to a single link
serves as the next-hop addresses
Organize All options into the right categories
used to reliably share files between devices
requires the client and the server to establish a connection before sending the packet
transmitted based on data contained in the packet without the need for a data channel
appropriate for streaming operations with minimal latency
Drag and drop the Ansible features from the options. Not all feature are used (a) . (b) (c) (d)
Drag and drop the Ansible features from the options. Not all feature are used (a) . (b) (c) (d)
Match the following
POST
Creates a resource on the server
GET
Reads data from the server
DELETE
Removes a resource from the server
PUT
Updates an entry in the database
Match the following based of Exhibit
255.255.254.0
172.16.4.0
255.255.255.128
172.16.2.128
255.255.255.224
172.16.3.64
255.255.255.240
172.16.3.128
255.255.255.248
172.16.3.192
Organize All options into the right categories based on device behaviors from the HSRP state.
is waiting to hear from the neighbor device
Learn
is forwarding packets
Active
has heard from the neighbor device and is receiving hello packets
Listen
is transmitting and receiving hello packets
Speak
is ready to forward packets if the device that is currently forwarding packets fails
Standby
Organize All options into the right categories based on characteristics of network architectures.
single device handles the core and the distribution layer
more cost-effective than other options
most appropriate for small network designs
enhances network availability
separate devices handle the core and the distribution layer
Drag and drop the routing table components based on the exhibit. Not all options are used. (a) (b) (c) (d) (e)
Organize All options into the right network segments used to reach the destination based on exhibit OSPF is running between site A and site B.
10.10.10.16
10.10.13.129
10.10.100.128
10.10.13.1
10.10.13.150
Organize All options into the right categories based the statement about AAA services.
It records the duration of each connection
It supports User Access Reporting
It restricts the CLI commands that a user is able to perform
It performs user validation via TACACS+
It grants access to networks assets, such as FTP servers
It verifies "who you are"
Organize All options into the right categories based on IPv6 address details.
used exclusively by a non-host device
assigned to more than one interface
derived from the FF00::/8 address range
provides one-to-many communications
includes link-local and loopback addresses
identifies an interface on an IPv6 device
Organize All options into the right categories based on OSPF parameter requirements for successful neighbor relationship.
Router ID
IP address
Netmask
Area ID
Timers
OSPF process ID
Organize All options into the right categories based on IPv6 address types.
enables aggregation of routing prefixes
is routable and reachable via the Internet
provides one-to-many communications
has a unicast source sent to a group
Refer to exhibit. Match the following subnet masks from the list onto the corresponding subnets.
10.10.13.0
255.255.255.128
10.10.13.128
255.255.255.240
10.10.10.13.160
255.255.255.248
10.10.13.252
255.255.255.252
Organize All options into the right categories based on characteristics of networking to networking types.
Focused on the network
User input is a policy
Uses white list security modal
Focused on devices
User input is a configuration
Uses black list security modal
Organize All options into the right categories based on facts about wireless architectures to types of access points.
Accessible for management via Telnet SSH, or a Web GUI
Requires a management IP address
Supports different operational modes
Configured and managed by a WLC
Organize All options into the right categories based on IPv6 address descriptions to IPv6 address types.
private IPv6 addresses
IPv6 addresses that begin with FD
may be used by multiple organizations at the same time
serve as next-hop addresses
unable to serve as destination addresses
IPv6 addresses in the format FF02::5
Organize All options into the right categories based on characteristics of device-management technologies to corresponding deployment types.
Orchestrates background device configuration
Supports centralized software management
Supports open APIs
Relies on per-device management
Provides greater flexibility for custom and non-standard configurations
Uses individual software management
Organize these options into the right categories based on characteristics of cable types
becomes distorted at longer lengths
is typically used for internal datacenter connectivity
has minimal light reflection as it travels down the core
uses a single wavelength of light
Match the following cloud-computing components with the correct descriptions.
The resource pool can expand quickly to meet demand
rapid elasticity
The consumer can choose when to start or stop using the service
on-demand self-service
The provider allocates CPU, memory, and disk from its shared compute resources to multiple customers
resource pooling
The provider can bill the consumer in accordance with the level of usage
measured service
The service is available from many types of devices and networks
broad network access
Organize these options into the right categories to AAA functions to AAA services.
identifies the user
verifies the password associated with a user
restricts the services that are available to a user
controls the actions that a user an perform
records user activities
provides analytical information for the network administrator
Organize All options into the right categories to DHCP snooping terms with the descriptions.
List of hosts on the network that are unknown to the administrative domain
Snooping binding database
Network component that propagates IP addresses to hosts on the network
DHCP server
Internal device under the control of the network administrator
Trusted
Unknown DHCP server within an administrative domain
Spurious DHCP server
Default state of all interfaces
Untrusted
Match the following virtualization concepts to matching statements.
an operating system instance that is decoupled from the server hardware
host operating system
each core can run more than one process simultaneously
multithreading
runs on a physical server, manages, and allocates the physical resources
hypervisor
the software that manages the basic functions of the physical hardware
virtual machine
the software that manages the basic functions of the virtual machine
guest operating system
Organize these options into the right categories based on characteristics of transport protocols to the protocol.
guarantees packet delivery
uses a 32-bit sequence number
provides support for retransmission of lost packets
ideal for voice traffic
offers minimal overhead within a packet
requires less computer resources
Organize these options into the right categories based on characteristics of IPv6 address types.
sends packets to a group address rather than a single address
has a unicast source sent to a group
is used exclusively by a non-host device
is routed to the nearest interface that has the address
Match the following elements of security program to their corresponding descriptions.
user-awareness learning level that focuses on security practice that all employees must understand and enforce
awareness
user-awareness learning level that focuses on learning about topics and practices beyond what is typically required by the user's job
education
tactical document that sets out specific tasks and methods to maintain security
security policy
document that outlines an organization's security goals and practices and the roles and responsibilities of the organization's personnel
security standard
user-awareness learning level that focuses on teaching employees how to perform tasks specifically required by their jobs
training
Organize All options into the right categories based on descriptions of device management to types of device management.
Monitors the cloud for software updates
Use CLI templates to apply a consistent configuration to multiple devices at an individual local
Use NetFlow to analyze security threats in the network and takes action on that traffic
Implements changes via an SSH terminal
Manages device configuration on a per-device basis
Security is managed near the perimeter of the network with firewalls, VPNs, and IPS
Organize these options into the right categories based on wireless architecture benefits to architecture types.
Work is divided between the access point and the controller
The access points transmit beacon frames
Uses the CAPWAP tunneling protocol
Appropriate for a small-business environment
Supports per device configuration and management
Refer to picture. Match the following based on the engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Match node identifiers to network parameters.
Broadcast Address
192.168.1.255
Default gateway
192.168.1.1
Host IP address
192.168.1.20
Last assignable IP address in the subnet
192.168.1.254
MAC address
B8-76-3F-7C-57-DF
Organize All options into the right categories based on characteristics of cable types.
uses multiple wavelengths of light
has increased attenuation over long distances
has a core diameter of 9 microns
uses a single wavelength of light
Match the following SNMP components to their descriptions.
network node controlled by SNMP
managed device
collection of uniquely identifiable objects whose state can be interrogated over SNMP
MIB
system that runs monitoring applications and controls network nodes
NMS
SNMP component that captures and translates device and network data
agent
Match the following Wi-Fi terms with their descriptions.
Wi-Fi option based around one of more access points
extended service set
Wi-Fi option in which cells from different access points are linked together
distribution system
Alphanumeric text string that identifies a wireless network
SSID
Wi-Fi option that enables two or more clients to communicate directly without a central access point
independent basic service set
Entire wireless cell of an access point and the linkage to the wired network
infrastructure mode
Match the following IPv6 record types to their descriptions.
aliases one name to another
CNAME
associates the domain serial number with its owner
SOA
correlates a domain with its authoritative name servers
NS
correlates a host name with an IP address
AAAA
supports reverse name lookups
PTR
Organize All options into the right categories based on application protocols that each transport protocol uses.
FTP
SMTP
SSH
DHCP
SNMP
TFTP
Organize All options into the right categories AAA features to AAA security services.
It leverages a RADIUS server to grant user access to a reverse Telnet session
It verifies the user before granting access to the device
It enables the device to allow user- or group- based access
It restricts the CLI commands that a user is able to perform
It records the amount of time for which a user accesses the network on a remote server
It uses TACACS+ to log the configuration commands entered by a network administrator
Organize All options into the right categories based on facts about wireless architectures to the types of access points.
Managed from a Web-based dashboard
Supports automatic deployment
Configured and managed by a WLC
Supports different operational modes
Accessible for management via Telnet, SSH, or a Web GUI
Organize All options into the right categories based on characteristics of northbound APIs.
supports automation
communicates between the SDN controller and the application plane
supports network virtualization protocols
supports REST-based requirements
communicates between the SDN controller and the data plane
supports data sharing between systems
uses OpenFlow to interface between the data and control planes
Match the following SNMP components to their descriptions.
collection of variables that can be monitored
MIB
unsolicited message
SNMP trap
responds to status and requests for information about a device
SNMP agent
resides on an NMS
SNMP manager
Organize All options into the right categories based on TCP/IP protocols as related to transmission protocols.
SMTP
HTTP
Telnet
DNS
SNMP
RTP
Organize All options into the right categories based on characteristics as to IPv6 address types.
is publicly routable in the same way as IPv4 addresses
provides for one-to-one communication
serves as the next-hop addresses
required on all IPv6 devices
Refer to picture. Match the following based on engineer is configuring the router to provide static NAT for the webserver. Match the configuration commands to the letters that correspond to its position in the configuration.
ip address 172.16.1.1 255.255.255.0
position A
ip nat inside
position B
ip address 45.83.2.214 255.255.255.240
position C
ip nat outside
position D
ip nat inside source static tcp 172.16.1.80 45.83.2.214 80 extendable
position E
Match the following based on IPv6 address types and their descriptions.
Multicast address used only locally within the site
FF05::23:becf:22:1111
Address that is automatically created on a link when IPv6 is enabled on an interface
FE80::abcf:ffff:12de:3992
Address that is prohibited from routing to the Internet
FD00:0000:0000:1a2d:a153:3992:a19d:ccca
Address that is unique and reserved for documentation purposes
2001:DB8::bced:1234:456d:aacc
Organize All options into the right categories based on IPv6 address types and their descriptions.
Address that is unique and reserved for documentation purposes
Address that is prohibited from routing to the Internet
Address that is automatically created on a link when IPv6 is enable on an interface
Multicast address used only locally within the site
Organize All options into the right categories. Descriptions of IP protocol transmissions with IP traffic types.
Sends transmissions in sequence
Transmits packets individually
Uses a lower transmission rate to ensure reliability
Transmissions include an 8-byte header
Transmits packets as a stream
Uses a higher transmission rate to support latency-sensitive application
Organize All options into the right categories. Descriptions with configuration-management technologies.
uses SSH for remote device communication
uses YAML for fundamental configuration elements
uses TCP port 10002 for configuration push jobs
uses Ruby for fundamental configuration elements
fundamental configuration elements are stored in a manifest
uses TCP port 8140 for communication
Organize All options into the right categories. DHCP functions.
provides local control for network segments using a client-server scheme
reduces the administrative burden for onboarding end users
maintains an address pool
assigns IP addresses to local hosts hosts for a configurable lease time
associates hostnames to IP addresses
offers domain name server configuration
uses authoritative serves for record keeping
Organize All options into the right categories. Statements about device management with corresponding device-management types.
It provides a single interface for network security and analytics
It supports CLI templates to apply a consistent configuration to multiple devices
It uses NetFlow to analyze potential security threats and takes action on that traffic
It uses multiple tools and applications to analyze and troubleshoot different types of data
Security is managed near the perimeter of the network with firewalls, VPNs, and IPS
It manages device configurations on a per-device basis
Match the following SNMP components with descriptions.
network node controlled by SNMP
managed device
collection of uniquely identifiable objects whose state can be interrogated over SNMP
MIB
system that runs monitoring applications and controls network nodes
NMS
SNMP component that captures and translates device and network data
agent
Match the following. Threat-mitigation techniques with types of threat or attack they mitigate.
802.1q double tagging
Configure VACL
ARP spoofing
Configure dynamic ARP inspection
Unwanted superior BPDUs
Configure root guard
Unwanted BPDUs on PortFast-enabled interfaces
Configure BPDU guard
Organize All options into the right categories. Rapid PVST+ forwarding state actions
BPDUs received are forwarded to the system module
Frames received from the attached segment are processed
Switched frames received from other ports are advanced
The port in the forwarding state responds to network management messages
Frames received from the attached segment are discarded
BPDUs received from the system module are processed and transmitted
Organize All options into the right categories.
802.11a
802.11n 5 GHz
802.11b
802.11g
802.11n 2.4 GHz
Match the following.
Operates in the 2.4 GHz and 5 GHz bands
802.11n
Operates in the 2.4 GHz band only and supports a maximum data rate of 54 Mbps
802.11g
Operates in the 5 GHz band only and supports a maximum data rate that exceed 100 Mbps
802.11ac
Supports a maximum data rate of 11 Mbps
802.11b
Operates in the 5 GHz band only and supports a maximum data rate of 54 Mbps
802.11a
Match the following.
Allows the port to belong to one VLAN when manually configured
static access
Allows the port to be assigned automatically to one VLAN
dynamic access
Allows the port to belong to one or more VLANs
trunk
Allows the port to support a single VLAN across a service-provider network usage
private
Allows the port to communicate with others within the same community VLAN
tunnel
Match the following.
Multicast address used only locally within the site
FF05::23:becf:22:1111
Address that is automatically created on a link when IPv6 is enabled on an interface
FE80::abcf:ffff:12de:3992
Address that is prohibited from routing to the Internet
FD00:0000:0000:1a2d:a153:3992:a19d:ccca
Address that is unique and reserved for documentation purposes
2001:DB8::bced:1234:456d:aacc
Match the following.
The network management system launches a preconfigured script to restore functionality
Restoration of service
The administrator can manually intervene at the source of the fault
Fault diagnosis and isolation
The system identifies performance degradation or service interruption
Problem resolution
The system groups alarms from related issues
Event correlation and aggregation
The system reports on the source of the issue
Fault detection
Match the following
Measure of the minimum power required to decode a radio signal without excessive errors
Receiver Sensitivity
Deviation from the propagation path that occurs when a signal encounters an obstacle
Signal-to-Noise Ratio
Reduction of energy in a signal as it travels away from the access point and encounters free space or obstacles
Noise Floor
Measure of the total unwanted signals at the receiver
Reflection
Relative power of the desired radio signal to unwanted signals at the receiver
Absorption
Organize All options into the right categories.
requires manual configuration of complex protocols
reduces the workload for enterprise customers
lacks support for SDA
leverages Cisco Prime Infrastructure
uses algorithms to detect security threats
uses northbound APIs
Match the following. DNS lookup components to the functions.
local database of address mappings that improves name-resolution performance
Cache
service that maps hostnames to IP addresses
DNS
disables DNS services on a Cisco device
no ip domain-lookup
in response to client requests, queues a name server for IP address information
name resolver
component of a URL that indicates the location or organization type
domain
Match the following. IPv6 address with the type.
Global Unicast
2000:1092:a1e8:827d:527c:3ce7:9816:1
Link-Local Unicast
fe80:cc72:4b9e:445c:8179:0420:5988:7
Multicast
ff00:ec6c:dbb1:3e8b:6d46:bd27:a236:12
Unique Local
fc00:9860:653f:5146:8cb2:a27c:cb6f:3
Match the following. Attack-mitigation techniques with types of attack that they mitigate.
Configure the native VLAN with a nondefault VLAN ID
802.1q double-tagging VLANhopping attack
MAC flooding attack
Configure 802.1x authentication
Man-in-the-middle spoofing attack
Configure DHCP snooping
Switch-spoofing VLAN-hopping attack
Disable DTP
Match the following. Configuration management terms with descriptions.
easy-to-manage deployment option that may lack scalability
agent
device hardware that runs without embedded management features
agentless
to automatically install or deploy a configuration or update
pull
daemon that determines when the central authority has updates available
provision
model in which the central server sends updates to nodes on an as-needed basis
push
Organize All options into the right categories. Facts about wireless architectures with types of access points.
Accessible for management via Tenet SSH, or a Web GUI
Requires a management IP address
Supports different operational modes
Configured and managed by a WLC
Match the following. HTTP methods used with REST-Based APIs to its descriptions.
Creates a resource and returns to URI in the response header
POST
Creates or replaces a previously modified resource using information in the request body
PUT
Removes a resource
DELETE
Retrieves a list of a resource's URIs
GET
Updates a resource using instructions included in the request body
PATCH
Refer to picture. Match the following. Learned prefixes with preferred route methods from which they were learned.
207.165.200.244/30
static
192.168.2.0/24
EIGRP
192.168.1.0/24
OSPF
172.16.2.0/24
RIP
Organize these options into the right categories. IPv6 address type characteristics.
routable and reachable via the Internet
equivalent to public IPv4 addresses
addresses with prefix FC00::/7
addressing for exclusive use internally without INternet routing
Organize these options into the right categories. Description of file-transfer protocols with correct protocols.
Provides reliability when loading an IOS image upon boot up
Uses TCP
Uses ports 20 and 21
Does not require user authenticaiton
Uses UDP
Uses port 69
Refer to Picture. Organize All options into the right categories. Router1 routing table has multiple methods to reach 10.10.10.0/24 as shown. The default Administrative Distance is used. Match the network conditions with routing methods that Router1 uses.
The static route and EIGRP are down
The static route and OSPF are down
All protocols are up
OSPF and eBGP are down
The static route and eBGP are down
Refer to photo. Match the following. Networking parameters with correct values.
00:0C:22
NIC vendor OUI
00:0C:22:83:79:A3
NIC MAC address
192.168.1.193
Default gateway
192.168.1.200
Host IP address
255.255.255.192
Subnet mask
Match the following. Virtualization concepts with statements.
An operating system instance that is decoupled from the server hardware
host operating system
Each core can run more than one process simultaneously
multithreading
Runs on a physical server, manages, and allocates the physical resources
hypervisor
The software that manages the basic functions of the physical hardware
virtual machine
The software that manages the basic functions of the virtual machine
guest operating system
Organize All options into the right categories. Statements about networking with corresponding networking types.
This type provisions resources from a centralized location
This type allows better control over how networks work and how networks are configured
This type enables networks to integrate with applications through APIs
New devices are configured using the physical infrastructure
This type requires a distributed control plane
Organize All options into the right categories. Statement about networking with corresponding networking types.
This type deploys a consistent configuration across multiple devices
Southbound APIs are used to apply configurations
A distributed control plane is needed
This type requires a distributed management plane
Northbound APIs interact with end devices
Organize All options into the right order. An engineer is configuring an encrypted password for the enable command on a router where the local user database has already been configured. Put configuration commands in sequence.
First
enable
Second
configure terminal
Third
enable secret $hf!@4fs
Fourth
exit
Match the following. Standard DNS lookup operation order
An endpoint submits a request for the IP address of a domain name
STEP 1
The DNS submits a request to the domain DNS server
STEP 2
The DNS submits a request to a root DNS server
STEP 3
The DNS receives a reply from the domain DNS server
STEP 4
The DNS responds to the endpoint
STEP 5
