NEW
Font size
WorksheetsTechnology and Livelihood Education Grade 9 Quiz
Total questions: 47
Worksheet time: 35mins
A drawing tool used to draw horizontal lines and serves as guide for triangles.
Compass
Protractor
Ruler
T-Square
The most popular measuring tool, usually 6 or 12 inches in length.
Compass
Protractor
Ruler
T-Square
An instrument used to draw vertical and inclined lines.
Protractor
Ruler
T-Square
Triangle
The best instrument used for dividing lines or distance into equal parts.
Compass
Divider
French Curve
Sharpener
It is used in setting a line degree angle.
Protractor
Ruler
T-Square
Triangle
A flat piece of plastic with standard symbols and used as guide for drawing images on plans.
French Curve
Templates
T-Square
Triangle
An area of land for construction or the lot on which a building is constructed.
Corner Lot
Location Lot
Site
Through Lot
Alphabets of English and Philippine languages originated in______________.
Egypt
France
Greece
Roman
If lines meet end-to-end therefore it produces a ____________________________.
point
ray
shape
segment
Which is true about mechanical spacing?
Space are wide
Spaces are removed
Spaces are equal
Spaces depends on the letters used
Which line represents the visible edges of an object?
Center Line
Dimension Line
Object Line
Phantom Line
Which of the following is NOT a part of an Architectural Working Drawing Sheet No. 1?
Floor Plan
Location Map
Perspective View
Site Dev't. Plan
This direction is always to be pointed vertical up with respect to the paper.
East
North
South
West
A graduated instrument in angular degrees for measuring angles.
Compass
Protractor
Ruler
T-Square
Local laws that set standard for structural design within the community.
Building Code Law
Fire Code Law
Sewerage Law
Zoning Law
This is the place in a house where foods are prepared.
Dining Room
Kitchen
Living Room
Porch
It is a room for sleeping and taking a rest.
Bedroom
Comfort Room
Dining Room
Living Room
A _______________ is an enclosed structure designed primarily to shelter an automobile.
balcony
carport
garage
porch
It provides access to the house through which supplies can be delivered to the service areas going through other parts of the house.
doors
gate
service entrance
windows
Which of the following is NOT a part of the three functional areas of a house?
Living Area
Lawn Area
Service area
Sleeping Area
In dimensioning Floor Plans, refrain from double entry dimensions and omit obvious dimensions.
False
True
Maybe
Neither True nor False
Which of the following rules on dimensioning floor plans is TRUE?
Dimension lines are placed about 20 mm apart
Rooms are dimensioned from the edge line of partitions
Dimensions should be placed to read from the right or from the top of the drawing.
Architectural dimensions refer to the actual size of the building regardless of the scale of the drawing.
Doors and windows in plan should show normally swinging doors at 450 opening.
False
True
Maybe
Neither True nor False
What is the minimum area for a bedroom?
4 sq. m.
5 sq. m.
6 sq. m.
7 sq. m.
It refers to the legal restrictions on size, location, and type of structures to be built on a designated area.
Building Code
Fire Code
Sewerage
Zoning
It refers to the distance at how far a building can be built within the property lines.
Property Line
Fence Line
Setback
Firewall
The outline and measurements of the proposed building and its placement on the property.
Floor Plan
Location Map
Perspective View
Site Dev't. Plan
A lot with at least two adjacent sides meeting on a corner of two streets.
Corner Lot
Inside Lot
Open Lot
Through Lot
A lot bounded on all sides by streets or pathways.
Corner Lot
Inside Lot
Open Lot
Through Lot
A lot surrounded on each side by other lots
Corner Lot
Inside Lot
Open Lot
Through Lot
The lines showing the exact area of the acquired lot.
Corner Lines
Inside Lines
Property Lines
Through Lines
Which of the following statement is TRUE about the National Building Code rules?
The front part of a house should not be less than 3.00 m. from the lot line along the street
Windows should be constructed along a wall of a house if this wall is flushed with or exactly on the lot line
For two-storey wooden or frame house, the height of the floor plan from the ground should not be less than 1.50 m
Walls with window opening should be less than 2.00 m. from the lot line of fence. In other words, adjacent houses should not be at least 4.00 m. from each other
Which of the following is NOT included in Sheet no. 2 in an Architectural Working Drawing?
Elevations
Floor Plan
Schedule of Doors
Sections
What is minimum measurement of a side of a comfort room?
0.80 m
0.90 m
1.00m
1.10m
What does the abbreviation FFL stand for?
Finish Floor Line
Finish Foul Line
Finish Fetch Line
Finish Fair Line
It consists of a free-standing roof completely separated from the house.
carport
Garage
Porch
Terrace
It is the top cross-sectional view of the floor area of a house.
Elevations
Floor Plan
Schedule of Doors
Sections
In dimensioning floor plans, overall dimensions are placed __________ of all other dimensions.
Inside
Left
Outside
Right
In floor plans, doors and windows are normally swinging ________ degrees.
30
45
60
90
Letters and numbers on the floor plan indicate the ____________.
Columns
Doors
Rooms
Windows
The combinations of letters and numbers in no. 42 on floor plans is called _________.
Grade
Grid
Gate
Grill
It is here where the family entertains, relaxes, listen to music, watches television, enjoy hobbies, dines and participates in other recreational activities
Bedroom
Dining Room
Kitchen
Living Room
This area includes the kitchen, laundry, garage workshops storage room and utility room.
Living Area
Recreation Area
Service Area
Sleeping Area
Doors are not illustrated in floor plans, but only on elevations.
TRUE
FALSE
Either A or B
Neither A nor B
Windows type cannot be explained in plan except for width and location.
TRUE
FALSE
Either A or B
Neither A nor B
What does the abbreviation FGL stand for?
Finish Grid Line
Finish Guide Line
Finish Grill Line
Finish Ground Line
What is the minimum distance between FFL and FGL?
0.15 m
0.20 m
0.25 m
0.30 m
