Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Cold Water Systems LO2

Total questions: 13

Worksheet time: 7mins

Name
Class
Date
1.

When installing an incoming mains, the pipe should be laid between:

a)

500mm and 1200mm

b)

800mm and 1500mm

c)

750mm and 1350mm

d)

1000mm and 2000mm

2.

What colour is MDPE?

a)

Black

b)

Blue

c)

Red

d)

Yellow

3.

What is the minimum size pipe modern properties are supplied with?

a)

15mm

b)

22mm

c)

25mm

d)

28mm

4.

At which point on a cold water supply system is regulated under the Water Regulations?

a)

From the ferrule

b)

From the water treatment plant

c)

From the Boundary stop valve

d)

From the stop valve inside the property

5.

All meters must be installed in a chamber located at the boundary of the property.

a)

True

b)

False

6.

Due to MDPE degrading in sunlight, what is the maximum permitted length you can install above the finish floor level?

a)

400mm

b)

275mm

c)

200mm

d)

150mm

7.

In accordance with the Water Regulations, where should the stop valve be located?

a)

Inside the building, below floor level, as close as possible to the door

b)

Inside the airing cupboard, as close as possible to the door

c)

Outside the building, as close as possible to the property boundary

d)

Inside the building, above floor level, as close as possible to the point of entry

8.

Where must you install drain-offs in a plumbing system?

a)

At every low point in the system

b)

At every high point in the system

c)

In areas out of sight to the homeowner

d)

Just at the point of entry to the property

9.

Where newer properties will typically have a 25mm MDPE service pipe, older properties will have either:

(Select 3)

a)

20mm MDPE pipe

b)

20mm copper pipe

c)

20mm lead pipe

d)

20mm LCS pipe

10.

Select all correct options.

Grey water recycling is used on which appliances?

a)

WC cisterns

b)

Washing machines

c)

Dishwashers

d)

Basins

11.

Grey water is considered as wholesome water.

a)

True

b)

False

12.

The greywater and rainwater system must run separately from the main system to prevent?

a)

System backflow

b)

Contamination of wholesome water

c)

Incorrect readings on the water meter

d)

Buildup of limescale

13.

Select from the following, the incorrect procedure to identifying which system a property has installed.

a)

Isolate incoming mains, identify which outlets stop flowing

b)

Identify any cisterns and their sizes in the loft

c)

Ask the local authority for a detail drawing of the property

d)

Record pressure readings at multiple outlets