Font size
WorksheetsPostLab_FuelTesting_2566
Total questions: 23
Worksheet time: 46mins
Which statement correctly identifies the types of coal?
4 types - Peat, Lignite, Bituminous, Anthracite.
4 types - Quartz, Lignite, Sub-bituminous, Anthracite.
5 types - Peat, Lignite, Bituminous, Sub-bituminous, Anthracite.
In ASTM D1373 for coal moisture analysis, what is the designated temperature for heating the coal to ascertain its moisture content?
95 ℃
105 ℃
950 ℃
Which statement correctly describes the calculation for %Fix carbon?
%Fix carbon = 100 - (%moisture + %ash + %volatile matter)
%Fix carbon = 100 + (%moisture + %ash + %volatile matter)
%Fix carbon = (%moisture + %ash + %volatile matter) × 100
In ASTM D1298, what is the purpose of determining the density/relative density/API gravity of petroleum products?
To measure the acidity of the product
To determine the flash point
To assess the color of the product
To classify and characterize the product
In ASTM D1298, which instrument is commonly used to measure the density/relative density/API gravity of petroleum products?
Spectrophotometer
Refractometer
Hydrometer
Chromatograph
In the copper strip corrosion test (ASTM D130), how is the severity of corrosion classified?
By measuring the weight loss of the copper strip
By assessing the color change of the copper strip
By determining the thickness of corrosion products on the copper strip
True or False ?: According to ASTM D130, the preparation of the copper strip is a crucial step to ensure consistent corrosion across the entire strip.
True
False
What is the primary purpose of the automatic titration systems used in ASTM E203 (standard test method for water)?
To measure the color of the sample
To determine the flash point of the substance
To perform Karl Fischer titration for moisture content
To assess the viscosity of the material
In ASTM D86 (distillation of petroleum products and liquid fuels), substances are categorized as group 1, 2, 3, or 4 based on properties, excluding
dry point
vapor pressure
IBP
EP
The uniform average condensation rate from 5% recovered to 5 mL in the flask is:
3-4 mL/min
4-5 mL/min
5-6 mL/min
6-7 mL/min
What is the End Point (EP) or Final Boiling Point (FBP)?
The corrected thermometer reading observed at the instant the first drop of condensate.
The maximum corrected thermometer reading obtained during the test.
The maximum percentage recovered.
ทำไมตัวอย่าง B100 (ไบโอดีเซล 100) จึงมีจุดวาปไฟสูงกว่า diesel (ดีเซล)
องค์ประกอบของ B100 มีสายโซ่ที่ยาวกว่า ซับซ้อนกว่าองค์ประกอบของ diesel
B100 ได้จากปาล์มน้ำมัน/น้ำมันพืช/ไขมันสัตว์ แต่ diesel ได้จากปิโตรเลียม การได้รับความร้อนและการติดไฟของดีเซลจึงเกิดง่ายกว่า
B100 มีความหนืดและความหนาแน่นสูงกว่า diesel
ข้อแตกต่างระหว่าง Flash point และ Fire point
Flash point คือ อุณหภูมิที่ทำให้เกิดจุดวาปไฟ แต่ Fire point คือ อุณหภูมิที่ทำให้เกิดจุดติดไฟ
Flash point คือ อุณหภูมิต่ำสุด ที่ทำให้เกิดไอระเหยแล้วติดไฟ แต่ Fire point คือ อุณหภูมิที่ทำให้เกิดจุดติดไฟ อย่างต่อเนื่อง มากกว่า 5 วินาที
Flash point คือ จุดวาปไฟ เกิดขึ้นชั่วขณะที่น้ำมันมีอุณหภูมิสูงถึงช่วงที่เริ่มเป็นไอ แต่ Fire point คือ จุดติดไฟ เกิดขึ้นต่อเนื่องเมื่อน้ำมันระเหยกลายเป็นไอ
Flash point คือ จุดที่อุณหภูมิและความดันเหมาะสมแรกที่ทำให้เกิดการลุกไหม้ของสาร แต่ Fire point คือ จุดที่สารลุกไหม้จนเกิดเปลวไฟได้
ในการทดลองพบว่าไม่พบจุดวาปไฟของ sample นิสิตคิดว่า sample ที่นำมาทดสอบน่าจะเป็นอย่างไร
ตัวอย่างอาจมีไอระเหยน้อยและมีการปนเปื้อนของสารอื่น
ตัวอย่างมีปริมาณมากเกินไป
ตัวอย่างที่นำมามีอุณหภูมิที่ไม่ถึงจุดที่ทำให้ของเหลวกลายเป็นไอ
ตัวอย่างที่สามารถทดสอบตามวิธีการทดสอบ ASTM D97 (Pour point) คือข้อใด
Coal
Petroleum product
Water
Solvent
ในการทดสอบตัวอย่างน้ำมันดีเซล และ B100 ด้วย ASTM D97 (Evaluating the low-temperature flow properties of petroleum products) ก่อนพบจุดไหลเท (pour point) จะพบจุดใดก่อน
Flash point
Fire point
Cloud point
True or False ? : ตัวอย่างที่สามารถทดสอบตาม ASTM D445 (Determining the kinematic viscosity of liquid petroleum products) คือ Transparent Liquids เท่านั้น
True
False
ในกระบวนการไพโรไลซิส (Pyrolysis) จะใช้ช่วงอุณหภูมิเท่าใดที่จะทำให้วัสดุเกิดการแตก (cracking) เพื่อให้ได้ผลิตภัณฑ์
100-200 ℃
200-300 ℃
300-400 ℃
400-450 ℃
ผลิตภัณฑ์ที่ได้จากกระบวนการไพโรไลซิส (Pyrolysis) จะได้อะไรบ้าง
char , fuel , gas
char, gas
Fuel, water
char, fuel
ในกระบวนการไพโรไลซิส (Pyrolysis) ควรจะต้องทำในสภาวะที่มีก๊าซชนิดใด
Nitrogen
Air
Oxygen
Helium
จากการทดลองโดยใช้ตัวอย่างน้ำมันไบโอดีเซล 3 ชนิด ได้แก่ B100, Palm fatty acid methyl esters (PFAME), Soybean fatty acid methyl esters (SFAME) เพื่อหาค่า ester content และ Linolenic acid อยากทราบว่า Linolenic acid มีจำนวน carbon กี่อะตอม และมีพันธะคู่หรือไม่
18:0
18:1
18:2
18:3
การผลิตน้ำมันไบโอดีเซลด้วยกระบวนการ transesterification มีผลพลอยได้ (by-product) คือ กลีเซอรอล นอกจากนี้ยังมี 'สบู่' ด้วย เพราะเหตุใด (1) by-product แยกชั้นออกจากน้ำมันไบโอดีเซล และ (2) ต้องกำจัดสบู่ออก
(1) เพราะทั้งสองมีขั้วที่เหมือนกันจึงแยกชั้นกันอยู่ และ (2) ต้องกำจัดสบู่ เนื่องจากสบู่มีลักษณะเหลว ลื่น เมื่อปนเปื้อนในน้ำมัน จะทำให้จุดไหลเทและจุดหลอมเหลวในน้ำมันแย่ลง
(1) เพราะทั้งสองมีขั้วต่างกัน จึงแยกชั้นกัน และ (2) ต้องกำจัดสบู่ เนื่องจากสบู่ทำให้เกิด emulsion ส่งผลให้ไม่สามารถแยกผลิตภัณฑ์และ by-product ออกจากกันได้
(1) เพราะทั้งสองมีขั้วต่างกัน จึงแยกชั้นกัน และ (2) ต้องกำจัดสบู่ เนื่องจากสบู่จะไปปนเปื้อนในน้ำมัน ทำให้น้ำมันที่ได้เหม็นหืน
ในการทดลอง gas chromatography แก๊สตัวใดทำหน้าที่เป็น carrier
helium
hydrogen, air zero
helium, nitrogen
air zero
