wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

PENILAIAN PENGETAHUAN AKHIR PERCUBAAN

Total questions: 60

Worksheet time: 30mins

Name
Class
Date
1.

Pilih yang manakah kebaikan sistem pneumatik? / Which of the following is an advantage of a pneumatic system?

I.     Menggunakan banyak paip / Using a lot of pipes

II.    Mudah disalur untuk jarak yang jauh dan mudah disimpan / Easily channeled for long distances and easy to store

III.  Udara tidak tertakluk kepada suhu dan tidak mudah terbakar / Air is not subject to temperature and is not flammable

IV.  Udara adalah bersih, kebocorannya tidak mencemarkan persekitaran / The air is clean, the leakage does not pollute the environment

a)

I, II dan III

b)

I, II dan IV

c)

I, III, dan IV

d)

II, III, dan IV

2.

Berdasarkan Rajah di atas, apakah nama blok yang bertanda X dan Y tersebut? / Based on Figure above, what is the name of the block marked X and Y?

a)

Penerima dan pengering / Receiver and dryer

b)

Penerima dan penggerak / Receiver and actuator

c)

Pengering dan unit servis / Dryer and service unit

d)

Injap kawalan dan penggerak / Control valve and actuator

3.

Pilih komponen yang digunakan dalam sistem pneumatik yang betul? / Choose the components used in the right pneumatic system?

                       I.       Pemasa / Timer

                     II.       Penapis Udara / Air filter

                    III.       Injap Arah / Directional valve

                   IV.       Pemampat Udara / Air compressor

a)

I, II dan III

b)

I, III dan IV

c)

II, III, dan IV

d)

I, II, III dan IV 

4.

“Berfungsi untuk menyimpan udara yang telah dimampat dan dikeringkan sebelum dihantar ke sistem. Komponen ini juga dikenali sebagai tabung udara” / “It works to store air that has been compressed and dried before being sent to the system. This component is also used as an air tube"

  1. Apakah komponen yang berfungsi seperti pernyataan di atas / What component works like the statement above

a)

Pelincir / Lubricant

b)

Penerima udara / Air receiver

c)

Injap tekanan / Injury pressure

d)

Pengatur tekanan / Pressure regulator

5.

Berdasarkan Rajah di atas, apakah nama bagi simbol injap tersebut? / Based on Figure above, what is the name of the valve symbol?

a)

2/2 Way Normally Closed Valve

b)

3/2 Way Normally Closed Valve

c)

4/2 Way Normally Closed Valve

d)

5/2 Way Normally Closed Valve

6.

Apakah yang dikatakan sistem pneumatik? / What does a pneumatic system say?

a)

Sistem yang digerakkan oleh kuasa minyak / An oil-powered system

b)

Sistem yang digerakkan oleh kuasa angin / A system is driven by wind power

c)

Sistem yang digerakkan oleh kuasa elektrik / A system powered by electrical power

d)

Sistem yang digerakkan oleh kuasa bahan bakar / A system powered by fuel power

7.

Apakah fungsi penggerak hidraulik? / What is the function of a hydraulic actuator?

a)

Mengubah arah aliran / Changing the direction of the trend

b)

Meningkatkan kecekapan sistem hidraulik / Improve the efficiency of the hydraulic system

c)

Mengubah kuasa elektrik ke kuasa mekanikal / Converting electrical power to mechanical power

d)

Mengubah kuasa bendalir ke kuasa mekanikal / Converting fluid power to mechanical power

8.

Berdasarkan Rajah di atas, apakah nama komponen dalam sistem hidraulik? / Based on Figure above, what are the names of the components in the hydraulic system?

a)

Tangki / Tank

b)

Penapis / Filter

c)

Pam / Pump

d)

Tuas Tangan / Hand Lever

9.

Antara berikut, manakah fungsi Injap Kawalan Berarah? / Which of the following is the function of 'Directional Control Valve'?

a)

Menghasilkan tekanan cecair kepada sistem / Generate fluid pressure to the system

b)

Menentukan arah pergerakan minyak/angin / Determine the direction of oil/wind movement

c)

Sebagai bahantara kepada perubahan-perubahan dalam sistem hidraulik / As a medium to changes in the hydraulic system

d)

Menukar tenaga hidraulik kepada tenaga mekanikal bagi menjalankan kerja / Convert hydraulic energy to mechanical energy to carry out work

10.

Antara berikut, manakah komponen yang digunakan untuk mengawal kelajuan bendalir dalam sistem hidraulik? / Which of the following components is used for each fluid velocity in a hydraulic system?

a)

Tangki / Tank

b)

Pam / Pump

c)

Injap Pelepas Tekanan / Pressure Relief Valve

d)

Injap Kawalan Arah / Directional Control Valve

11.

Berdasarkan Rajah di atas, apakah nama simbol komponen dalam sistem pneumatik tersebut? / Based on Figure above, what is the symbolic name of the component in the pneumatic system?

a)

Single Acting Cylinder

b)

Double Acting Cylinder

c)

Single Acting Ram Cylinder

d)

Double Rod Double Acting Cylinder

12.

Antara berikut, manakah simbol 4/3 Way Valve? / Which of the following is the symbol of 4/3 Way Valve?

a)

b)

c)

d)

13.

Apakah fungsi geganti beban lampau (Overload Relay) di dalam pemasangan litar motor elektrik? / What is the function of an overload relay in an electric motor circuit assembly?

a)

Menambah kuasa bagi motor / Add power to the motor

b)

Menghadkan arus bagi motor / Limit the current for the motor

c)

Menghadkan voltan bagi motor / Limit the voltage for the motor

d)

Menghadkan rintangan bagi motor / Limit the resistance of the motor

14.

Berdasarkan Rajah di atas, apakah nama bagi litar kawalan tersebut? / Based on Figure above, what is the name of the control circuit?

a)

DOL

b)

Star Delta

c)

Roto Resistance

d)

Auto Transformer

15.

Berdasarkan Rajah 6 di atas, apakah persamaan yang betul? / Based on Figure 6 above, what is the correct equation?

a)

1 minit = 1 kaki = 33,000 Lbs / 1 minute = 1 foot = 33,000 Lbs

b)

1 HP = 1minit = 1 kaki = 33,000 Lbs / 1 HP = 1 minute = 1 foot = 33,000 Lbs

c)

746 Watt = 1 minit = 1 kaki = 33,000 Lbs / 746 Watts = 1 minute = 1 foot = 33,000 Lbs

d)

1HP = 746 Watt = 1 minit = 1 kaki = 33,000 Lbs / 1HP = 746 Watts = 1 minute = 1 foot = 33,000 Lbs

16.

Apakah yang dimaksudkan dengan motor elektrik? / What is meant by an electric motor?

a)

Motor elektrik adalah mesin yang menukarkan tenaga elektrik kepada tenaga solar. / An electric motor is a machine that converts electrical energy into solar energy

b)

Motor elektrik adalah mesin yang menukarkan tenaga mekanikal kepada tenaga solar. / An electric motor is a machine that converts mechanical energy into solar energy.

c)

Motor elektrik adalah mesin yang menukarkan tenaga mekanikal kepada tenaga elektrik. / An electric motor is a machine that converts mechanical energy into electrical energy

d)

Motor elektrik adalah mesin yang menukarkan tenaga elektrik kepada tenaga mekanikal. / An electric motor is a machine that converts electrical energy into mechanical energy.

17.

Apakah 2 jenis motor arus ulang alik? / What are the 2 types of alternating current motors?

a)

Motor fasa belah dan motor induksi / Split phase motors and induction motors

b)

Motor segerak dan motor fasa belah / Synchronous motors and split phase motors

c)

Motor pemutar berbelit dan motor segerak / Twisted motor rotor and synchronous motor

d)

Motor a.u fasa tunggal dan motor a.u tiga fasa / Single-phase a.u motor and three phase a.u motor

18.

Apakah komponen yang terdapat pada luar sebuah motor satu fasa? / What are the external components of a single phase motor?

a)

sebuah turbin / turbine

 

b)

sebuah kapasitor / capacitor

c)

sebuah thermostat / one thermostat

d)

sepasang berus karbon / a pair of carbon brushes

19.

Berdasarkan Rajah di atas, apakah nama bagi komponen tersebut? / Based on Figure above, what is the name of the component?

a)

Contactor

b)

Circuit Breaker

c)

Timer Contactor

d)

Stop Start Push Button

20.

Apakah warna bagi penyambungan wayar hidup (Life)? / What is the color of the life

wire connection (Life)?

I.        Biru / Blue

II.         Merah / Red

III.        Hitam / Black

IV.        Kuning / Yellow

a)

I, II dan IV

b)

I, II, dan III

c)

I, III dan IV

d)

II, III, dan IV

21.

Berdasarkan Rajah di atas, apakah nama simbol komponen elektrik tersebut? / Based on Figure above, what is the symbolic name of the electrical component?

a)

Lampu Dinding / Wall Lamps

b)

Lampu Filamen / Filament Lights

c)

Lampu Glob dinding / Glob wall lights

d)

Lampu Pendaflour / Pendaflour lamp

22.

Berpandukan Rajah di atas, apakah nama kabel yang bertanda X? / Based on Figure  above, what is the name of the cable marked X?

a)

Hidup / Life

b)

Mati / Dead

c)

Bumi / Earth

d)

Neutral / Neutral

23.

Berdasarkan Rajah di atas, apakah nama lampu tersebut? / Based on Figure above, what is the name of the lamp?

a)

Lampu Dinding / Wall Lamps

b)

Lampu Filamen / Filament Lights

c)

Lampu Pendaflour / Pendaflour lamp

d)

Lampu Glob dinding / Glob wall lights

24.

Apakah perbezaan antara lampu LED dan lampu pendarflour? / Is there a difference between LED lights and fluorescent lights?

a)

Perbezaan antara lampu LED dan lampu pendarflour tiada perbezaan / The difference between LED lights and fluorescent lights is no difference

b)

Perbezaan antara lampu LED dan lampu pendarflour terletak pada prinsip pencahayaan sahaja / The difference between LED lamps and fluorescent lamps is on the principle of illumination only

c)

Perbezaan antara lampu LED dan lampu pendarflour terletak pada prinsip pencahayaan, pengeluaran haba, hayat perkhidmatan dan kecekapan cahaya. / Differences between LED lamps and fluorescent lamps on the principles of illumination, heat production, service life, and light efficiency

d)

Perbezaan antara lampu LED dan lampu pendarflour ialah tidak terletak pada prinsip pencahayaan, pengeluaran haba, hayat perkhidmatan dan kecekapan cahaya. / The difference between LED lamps and fluorescent lamps does not exist in the principles of illumination, heat production, service life and light efficiency

25.
  1. Antara berikut pilih perkara-perkara yang perlu ada di dalam Standard Operating Procedure? / Among the following, select the items that must be included in the Standard Operating Procedure?

I.       Kebersihan / Cleanliness

II.      Keselamatan / Security

III.    Langkah kerja / Working steps

IV.    Keperluan laporan / Reporting requirements

a)

I, II dan III

b)

I, II dan IV

c)

I, III dan IV

d)

II, III, dan IV

26.
  1. Pilih perkara-perkara yang berkaitan mengenai kelebihan Standard Operating Procedure. / Select the relevant points about the advantages of Standard Operating Procedure.

I.    Sebagai alat perhubungan / Complicate the consumer situation

II.    Merumitkan keadaan pengguna / As a means of communication

III.    Mengandungi aspek keselamatan untuk sesebuah mesin / Contains safety aspects for a machine 

IV.   Merupakan rujukan arahan tetap daripada pihak atasan / Is a reference to the standing instructions of superiors

a)

I, II dan III

b)

I, III dan IV

c)

I, II dan IV

d)

II, III, dan IV

27.

Apakah nama penuh bagi S.O.P? / What is the full name for S.O.P?

a)

Standard Operate Procedur

b)

Standard Operate Procedure

c)

Standard Operating Procedur

d)

Standard Operating Procedure

28.
  1. Mengapakah Akta Keselamatan dan Kesihatan Pekerjaan ditubuhkan? / Why was the Occupational Safety and Health Act established?

a)

Untuk merosakkan mental dan fizikal pekerja / To harm the mental and physical of the employee

b)

Untuk membuang pekerja sesuka hati oleh pihak majikan / To dismiss an employee at will by the employer

c)

Untuk memastikan keselamatan dan kebajikan pekerja terjamin / To ensure the safety and welfare of employees

d)

Untuk memastikan pekerja tidak mendapat hak kebajikan yang sempurna / To ensure that employees do not have perfect welfare rights

29.
  1. Antara berikut, pilih kepentingan – kepentingan S.O.P untuk membuat kerja-kerja praktikal? / Among the following, choose the importance of the S.O.P to do practical work?

I.    Untuk tidak memudahkan kerja / Not to make work easier

II.    Untuk mengetahui arahan yang jelas / To know clear instructions

III.    Untuk melaksanakan sesuatu tugas tanpa arahan / To perform a task without instructions

IV.   Untuk memudahkan proses membuat sesuatu barang / To facilitate the process of making something

a)

I, II dan III

b)

I, II dan IV

c)

II, III, dan IV

d)

I, III dan IV 

30.
  1. Apakah perkara-perkara yang perlu ada di dalam penulisan Standard Operating Procedure? / What are the things that should be in the writing of the Standard Operating Procedure?

I.    Bilangan pekerja / Number of employees

II.    Nama mesin / Name of the machine

III.    Tarikh dan tandatangan / Date and signature

IV.   Nama dan logo syarikat / Company name and logo

a)

I, II dan III

b)

I, III dan IV

c)

II, III, dan IV

d)

I, II dan IV

31.

Antara berikut, pilih kelemahan yang berlaku dalam sistem pneumatik / Among the following, choose the weakness that occurs in the pneumatic system

I. Ianya menggunakan banyak paip / It uses a lot of pipes

II. Udara termampat memerlukan persediaan sistem yang teliti / Compressed air requires careful system setup

III. Keperluan dayanya terhad, hanya dari 10kN – 15kN / Power requirements are limited, only from 10kN - 15kN

IV. Udara yang terkeluar dari proses pemampatan mengeluarkan bunyi yang bising / The air coming out of the compression process emits a loud noise

a)

I, II, dan III

b)

I, II, dan IV

c)

I, III, dan IV

d)

II, III, dan IV

32.

Apakah fungsi pressure gauge dalam sistem pneumatik? / What is the function of a pressure gauge in a pneumatic system?

a)

Sebagai tempat untuk menyimpan angin / As a place to store wind

b)

Menunjukkan tekanan angin dalam tangki./ Indicates the wind pressure in the tank

c)

Mengawal motor elektrik dengan mengesan tekanan dalam tangki. / Control the electric motor by detecting the pressure in the tank

d)

Menyejukkan angin mampat kepada beberapa darjah lebih daripada tahap pembekuan / Cool the compressed air to a few degrees closer to freezing

33.

Berdasarkan rajah, apakah nama bagi simbol komponen tersebut dalam sistem hidraulik atau pneumatik? / Based on diagram, what is the name of the symbol of the component in a hydraulic or pneumatic system?

a)

Single Acting Single Rod Cylinder

b)

Single Acting Double Rod Cylinder

c)

Double Acting Single Rod Cylinder

d)

Double Acting Double Rod Cylinder

34.

Apakah komponen asas bagi ‘silinder tindakan tunggal’? / What are the basic components of a ‘single acting cylinder’?

a)

Relay

b)

Switch

c)

Spring

d)

Sensor

35.

Berdasarkan rajah, apakah nama bagi simbol komponen tersebut dalam sistem hidraulik atau pneumatik? / Based on diagram, what is the name of the symbol of the component in a hydraulic or pneumatic system?

a)

Single Acting Single Rod Cylinder

b)

Single Acting Double Rod Cylinder

c)

Double Acting Single Rod Cylinder

d)

Double Acting Double Rod Cylinder

36.

Apakah fungsi filter dalam sistem pneumatik? / What is the function of a filter in a pneumatic system?

a)

Digunakan untuk menapis valve dan habuk atau butiran pasir daripada memasuki sistem pneumatik / Used to filter valves and dust or sand particles from entering the pneumatic system

b)

Digunakan untuk menapis minyak dan habuk atau butiran pasir dari pada memasuki sistem pneumatic / Used to filter oil and dust or sand grains from entering the pneumatic system

c)

Digunakan untuk menapis bendasing dan habuk atau butiran pasir dari pada memasuki sistem pneumatic / Used to filter impurities and dust or sand particles from entering the pneumatic system

d)

Digunakan untuk tidak menapis bendasing dan habuk atau butiran pasir daripada memasuki sistem pneumatic / Used to not filter out impurities and dust or sand particles from entering the pneumatic system

37.

Apakah mesin yang tidak menggunakan penggerak hidraulik? / What machines do not use hydraulic actuators?

a)

Kren / Crane

b)

Pam angin / Windpump

c)

Mesin tekanan / Pressure machine

d)

Mesin membina jambatan / Bridge answering machine

38.

Berdasarkan rajah, apakah nama bagi simbol komponen tersebut dalam sistem hidraulik atau pneumatik? / Based on diagram, what is the name of the symbol of the component in a hydraulic or pneumatic system?

a)

2/2 Way Normally Closed Valve

b)

3/2 Way Normally Closed Valve

c)

4/2 Way Normally Closed Valve

d)

5/2 Way Normally Closed Valve

39.

Berapakah jumlah aliran yang terdapat dalam ‘silinder tindakan bekembar’? / What is the total flow in a ‘double action cylinder’?

a)

1 aliran / 1 flow

b)

2 aliran / 2 flow

c)

3 aliran / 3 flow

d)

4 aliran / 4 flow

40.

Antara berikut manakah antara berikut yang benar mengenai ‘silinder tindakan tunggal’ dan ‘silinder tindakan bekembar’ dalam sistem hidraulik? / Which of the following is true about ‘single acting cylinders’ and ‘double acting cylinders’ in hydraulic system?

a)

Kedua-dua merupakan silinder penggerak hidraulik / Both are hydraulic actuator cylinders

b)

Komponen bagi silinder tindakkan tunggal dan silinder tindakkan bekembar adalah sama. / The components of a single acting cylinder and a double acting cylinder are the same

c)

Silinder tindakan tunggal mempunyai cara pengoperasian yang sama dengan silinder tindakan bekembar / A single acting cylinder has the same mode of operation as a double acting cylinder

d)

Silinder tindakan tunggal mempunyai 1 liang masukan manakala silinder tindakan bekembar mempunyai 2 liang masukan. / A single acting cylinder has 1 input ports while a double acting cylinder has 2 input ports

41.

Apakah fungsi punat tekan (push button) dalam litar motor? / What is the function of a push button in a circuit motor?

a)

Sebagai kawalan kecemasan / As an emergency control

b)

Mengawal kelajuan motor / Control the speed of the motor

c)

Memula dan memberhentikan motor / Starting and stopping the motor

d)

Menukar arah putaran motor / Changing the direction of rotation of the motor

42.

Apakah jenis motor yang sesuai untuk membuat sambungan litar Star / Delta / What type of motor is suitable for making a Star / Delta circuit connection.

a)

Motor Ac Sahaja / Motor Ac Only

b)

Motor Dc Sahaja / Motor Dc Only

c)

Semua Jenis Motor / All Types of Motorcycles

d)

Motor Tiga Fasa Sahaja / Three Phase Motor Only

43.

Apakah fungsi Auto Transfomer dalam litar motor? / What is the function of Auto Transformer in motor circuits?

a)

Merendahkan rintangan dalam litar bagi mengurangkan arus permulaan motor / Lower the resistance in the circuit for each motor current

b)

Merendahkan voltan dalam litar bagi mengurangkan arus permulaan motor / Lowering the voltage in the circuit for the current motor current

c)

Merendahkan arus dalam litar bagi mengurangkan voltan permulaan motor / Lower the current in the circuit for a motor consumption voltage

d)

Merendahkan rintangan dalam litar bagi mengurangkan voltan permulaan motor / Lower the resistance in the circuit for the motor consumption voltage

44.

Apakah fungsi Rotor Resistance dalam litar motor? / What is the function of Rotor Resistance in motor circuits?

a)

Merendahkan voltan dalam litar bagi mengurangkan arus permulaan motor / Lowering the voltage in the circuit for the current motor current

b)

Merendahkan arus dalam litar bagi mengurangkan voltan permulaan motor / Lower the current in the circuit for a motor consumption voltage

c)

Meninggikan rintangan dalam litar bagi mengurangkan arus permulaan motor / Increase the resistance in the circuit for each motor current

d)

Meninggikan rintangan dalam litar bagi mengurangkan voltan permulaan motor / Increase the resistance in the circuit for the motor consumption voltage

45.

Apakah fungsi Remote Control dalam kawalan motor? / What is the function of the Remote Control in motor control?

a)

Kawalan tanpa kabel untuk mengawal motor / Wireless control for motors

b)

Kawalan motor menggunakan sambungan kabel / Motor control using a cable connection

c)

Kawalan berperingkat bagi motor untuk mengawal arah putaran bagi sesebuah motor / Different controls for the motor to find the direction of rotation for a motorcycle

d)

Kawalan berpusat bagi motor untuk menggawal keseluruhan motor dalam satu tempat / Centralized control of the motor to control the entire motor inside one place

46.

Berdasarkan rajah, apakah nama bagi komponen tersebut? / Based on diagram, what is the name of the component?

a)

Timer

b)

Overload

c)

Contactor

d)

Stop Start Push Button

47.

Apakah definisi troubleshooting? / What is the definition of troubleshooting?

a)

Satu proses menyelesaikan masalah / A problem-solving process

b)

Aktiviti yang dilakukan semasa membuat litar / Activities performed while making a circuit

c)

Memberikan paduan kepada  kita menentukan kerosakkan / Give us a clue to determine the damage

d)

Satu bentuk penyelesaian masalah, yang sering digunakan untuk membaiki sesuatu peralatan / mesin yang rosak atau gagal beroperasi. / A form of troubleshooting often used to repair equipment/machinery that is damaged or fails to operate

48.

Apakah perbezaan antara lampu LED dan lampu pendarflour? / What is the difference between LED lights and fluorescent lights?

a)

Perbezaan antara lampu LED dan lampu pendarflour tiada perbezaan / The difference between LED lights and fluorescent lights is no difference

b)

Perbezaan antara lampu LED dan lampu pendarflour terletak pada prinsip pencahayaan sahaja / The difference between LED lamps and fluorescent lamps is on the principle of illumination only

c)

Perbezaan antara lampu LED dan lampu pendarflour terletak pada prinsip pencahayaan, pengeluaran haba, hayat perkhidmatan dan kecekapan cahaya. / Differences between LED lamps and fluorescent lamps on the principles of illumination, heat production, service life, and light efficiency

d)

Perbezaan antara lampu LED dan lampu pendarflour ialah tidak terletak pada prinsip pencahayaan, pengeluaran haba, hayat perkhidmatan dan kecekapan cahaya. / The difference between LED lamps and fluorescent lamps does not exist in the principles of illumination, heat production, service life and light efficiency

49.

Apakah fungsi pemeriksaan bekalan kuasa dalam proses mengesan kerosakan / What is the function of the power test in the process of detecting faults

a)

Keadah mencari simptom pada fius yang rosak / How to look for symptoms on a faulty fuse

b)

Melakukan analisis kerosakan pada kabel yang rosak / Perform analysis on damaged cables

c)

Mengasingkan komponen, kabel dan fius yang rosak / Isolate faulty components, cables, and fuses

d)

Memeriksa kerosakan litar adalah memastikan kabel yang disambungkan dan fius tidak terbakar. / Checking for circuit damage is the cable lock is connected and the fuse is not blown out.

50.

Bagaimanakah cara seseorang juruteknik bidang elektrik dan elektronik memastikan keselamatan persekitaran tempat kerja dalam keadaan selamat? / How does a technician in the field of electricity and electronics ensure the safety of the workplace environment?

a)

Bekerja di kawasan kurang pencahayaan atau gelap / Work in poorly lit or dark areas

b)

Gunakan pemadam api yang dibenarkan / Use an approved fire extinguisher

c)

Menanggalakan wayar bumi dan menggunakan (adapter) untuk menggantikan perlatan bumi. / Disconnect the earth wire and use (adapter) to color the earth equipment

d)

Memakai cincin,rantai,dan bahan-bahan yang sama seperti besi bila bekerja dengan litar elektrik. / Wear rings, chains, and materials similar to iron when working with electrical circuits.

51.

Antara berikut yang manakah bukan peralatan PPE (Personal Protective Equipment)? / Which of the following is not PPE equipment?

a)

Topi keselamatan / Safety helmet

b)

Kasut keselamatan / Safety shoes

c)

MSDS (Material Safety Data Sheet)

d)

Kaca mata keselamatan / Safety glasses

52.

Apakah fungsi silinder pneumatik? / What is function of pneumatic cyclinder?

a)

Menolak objek / Push object

b)

Menarik objek / Pull object

c)

Mengangkat objek / Lift up object

d)

Menolak dan menarik objek / Push and pull object

53.

Berdasarkan rajah, apakah nama komponen pneumatik tersebut? / Based on diagram, what is the name of the pneumatic component?

a)

3/2 way normally open pneumatic valve

b)

3/2 way normally closed pneumatic valve

c)

3/2 way push button normally open pneumatic valve

d)

3/2 way push button normally closed pneumatic valve

54.

Apakah nilai 1 bar jika ditukarkan dalam unit 'psi' / What is the value of 1 bar if converted in 'psi' units

a)

4.5 psi

b)

14.5 psi

c)

145 psi

d)

0.145psi

55.

Namakan komponen pneumatik yang berfungsi mengawal salah satu masukan arah laluan angin mampat? / Name the pneumatic component that functions to control one of the inputs of the compressed air path?

a)

Dual pressure valve

b)

One way flow control valve

c)

Shuttle valve

d)

Quick exhaust valve

56.

Apakah bahan yang diperlukan untuk memanjangkan hayat dan melicinkan pergerakan komponen pneumatik / What materials are needed to extend the life and smooth the movement of pneumatic components

a)

Minyak petrol / Petrol oil

b)

Minyak masak / Cooking oil

c)

Minyak pelincir / Lubricant oil

d)

Minyak diesel / Diesel oil

57.

Apakah alat untuk mengurangkan bunyi bising dalam sistem pneumatik ? / What is a tool to reduce noise in a pneumatic system?

a)

Injap arah / Directional valve

b)

Penyenyap / Silencer

c)

Suis / Switch

d)

Pelincir / Lubricant

58.

Apakah fungsi 'one way flow control valve' yang betul ? / What is the correct function of 'one way flow control valve'?

a)

Untuk melaraskan aras laluan masuk dan keluar angin mampat / To adjust the level of the compressed air inlet and outlet

b)

Untuk melaraskan aras laluan masuk angin mampat / To adjust the level of the compressed air inlet

c)

Untuk melaraskan aras laluan keluar angin mampat / To adjust the compressed air outlet level

d)

Untuk tidak melaraskan aras laluan masuk dan keluar angin mampat / To not adjust the level of the compressed air inlet and outlet

59.

Apakah nama komponen pneumatik tersebut? / What is the name of the pneumatic component ?

a)

4/2 way solenoid valve with spring

b)

4/2 way push button valve with spring

c)

5/2 way solenoid valve with spring

d)

5/2 way push button valve with spring

60.

Apakah nama komponen pneumatik tersebut ? / What is the name of the pneumatic component ?

a)

2/2 way push button valve with spring

b)

2/2 way solenoid valve with spring

c)

3/2 way push button valve with spring

d)

3/2 way solenoid valve with spring