WorksheetsP.E.O Questions Part/1 (Units 1,2,3)
Total questions: 58
Worksheet time: 29mins
Which H&S regulations cover the use of an electrical saw?
PUWER and PPE Regulations
RIDDOR/COSHH
Which H&S regulations cover the use of a GRINDER?
RIDDOR/COSHH
HASAWA Act 1974
PUWER and PPE Regulations
Under RIDDOR, what would a contained pipeline explosion be listed as?
Hazardous malfunction
A dangerous occurrence
Under RIDDOR, what would failure of breathing apparatus under test be considered as?
Hazardous malfunction
A dangerous occurrence
How can you help protect yourself from harm when others are using the drilling machine?
Do not be aware of surroundings, do not wear PPE
Be aware of surroundings, Wear PPE, Keep out of yellow area
What is the correct way to lift when manual handling?
Bend at legs and keep back straight.
Pick it up the way you want to do it
What is the correct way to lift when manual handling?
Twisting the back and lean sideways when moving with the load.
Avoid twisting the back or leaning sideways.
Which substance would the following warning sign be used for, flammable warning sign
Methanol
Oxygen gas
Which substance would the following warning sign be used for? Toxic warning sign
Arsenic and Cyanide Paste
Acetylene/Argon gas
Who should carry out a risk assessment as described in the Management of Health and Safety at Work Regulations?
A trained person
A Competent Person
Which of the following is the first step when carrying out a risk assessment?
Identifying hazards
Start to work immediately
Which of the following fire extinguishers is most suitable for a cooking oil fire?
Wet Chemical
Powder
Which of the following fire extinguisher is most suitable for a gas fire?
Wet Chemical
Vaporizing Liquid
What method of heat transfer is the sun classified as?
Radiation
Evaporation
Which method of heat transfer moves through solids?
Radiation
Conduction
What is the most important factor when treating major (large) cuts?
Control of bleeding
Prevention of infection
What is the most important factor when treating minor (small) cuts?
Control of bleeding
Prevention of infection
Which of the following is the correct sequence to follow when assessing an accident?
1. Make sure airway is clear.
2. Check circulation (pulse).
3. Check that casualty is breathing.
4. Check for a response.
5. Check for danger to self and casualty
5, 4, 1, 3, 2. Answer
5, 4, 2, 3, 1. Answer
What are Class "A" fires?
Wood, Paper and Textiles
Diesel and Solvents
What are Class "B" fires?
Wood, Paper and Textiles
Diesel and Solvents
Which fire extinguishers would you use for a wood fire?
Water
Diesel and Solvents
Ladders should be at an angle of ________vertical.
77°
75°
What are items of PPE that satisfy certain basic safety requirements marked with?
CA
CE
Hand held grinders can be a source of HAVS, what does "HAVS" stand for?
Hand-Arm Vibration Syndrome
Hand-Arm Syndrome
What is an Accident Log?
A record of all accidents
A record of all accidents and near misses
If you have an accident at work, you should ______________.
Get first aid and report it by completing an accident report
Do not report all accidents and near misses to your Instructor
International health and safety signs use four colors, what are they?
Red, Black, Yellow and Grey
Red, Blue, Yellow and Green
Which substance would this sign be used for? Harmful/Irritant sign
Cutting Fluid
Water
What is the purpose of an automatic fire alarm system?
A. To detect a fire as soon as possible
B. To identify the fire's location.
(A, B and C)
C. To alert occupants of the building.
Match the color codes to each fire extinguisher.
Water = Red
Dry Powder = Blue
Foam = Beige/Yellow
CO2 = Black
Water = Black
Dry Powder = Blue
Foam = Beige/Yellow
CO2 = Red
The three (3) parts that make up the fire triangle are?
Oxygen
Fuel
Heat
Water
Which side of the fire triangle does a WATER extinguisher remove?
Fuel
Heat
Which specific health and safety regulation must be followed when using the drilling machine?
PUWER
COSHH
Which regulation covers the provision and use of safety boots and gloves?
PUWER
Personal Protective Equipment
Which of the following items constitutes an accident?
Cutting your hand on a sharp tool
Make sure report all accidents/incidents
What is the first consideration in controlling risks from a hazardous substance?
Use a hazardous substance for the task
Use a non-hazardous substance for the task
How would you move a 2m length of 8 mm round bars across the workshop?
Lift and carry it upright
Lift and carry it any way you want
What does ‘acting responsibly’ mean when leaving the green walkway inside the workshop?
Wear appropriate clothing and follow instructions
Wear appropriate PPE (safety shoes, glass and overalls) and follow instructions
How should you present yourself suitably prepared for working with others in the workshop?
Wear appropriate classroom uniform in the workshop and follow instructions
Wearing safety footwear, coveralls and safety glasses
What is the correct PPE for using the threading machine?
Wear academic uniform in the workshop when working on the threading machine
Wearing safety footwear, coveralls and safety glasses
What are the FOUR parts of each practical task in your portfolio?
Drawing, plan, check sheet, stores requisition
Drawing, plan, check sheet, attendance sheet
What documentation is required to record the size of your work piece?
Drawing, plan, check sheet, stores requisition
Check Sheet/Marking sheet
What does a Personal Development Plan contain?
Future goals, current development, action plan towards goals
What i need to do to complete all my work within the P.E.O
How should you handle disagreements with others in the workplace?
Report it to your instructor
Keep calm, respect others views, find areas of common understanding
How should used-cutting fluid be disposed of?
Place in container for recycling
Disposed into the sewer/drain
Which of the following would be included in an improvement in working methods?
Carry out the task quicker and disregard safety prcatices
Carry out task cheaper, quicker and safer without loss of quality
Which of the following problems should you try to solve yourself?
Dealing with task difficulties
Disagreements with others in the workplace
How should you present yourself suitably prepared for the classroom environment?
Any type of clothing
Wearing safety footwear, coveralls and safety glasses
What is the correct PPE for using the off-hand grinding machine?
Any type of clothing
Wearing safety footwear, coveralls and safety glasses
What are the FOUR parts of your plan of work?
Task name, tool list, risk assessment, job sequence
Wearing safety footwear, coveralls and safety glasses
Which documentation will help you to work to size?
Risk assessment, Job sequence
Drawing
Why do you complete a Personal Development Plan?
Training needs can be identified and planned
Set a time and date to complete all my tasks
What is the wrong way for you to handle disagreements with others?
Keep calm, respect others views, find areas of common understanding
Confront other person, shout to resolve issue if necessary
Name 3 types of waste disposal methods.
Incineration, Recycling, Landfill
Incineration, Recycling, Cycling
Whom should you speak to if you are uncertain about the protection provided from your personal protective equipment (PPE)?
Suppliers
Your line manager,instructor,supervisor
Which of the following problems should you seek help with?
Breakdown of machines used.
Completeting your practical task
Which instructions are best to work from?
Verbal
Written
Skill is about ____________.
How fast you work
How well you carry out a task
