NEW
Font size
WorksheetsSession 2 wheel alignment review
Total questions: 12
Worksheet time: 7mins
Negative thrust angle is when:
The left spindle is further back than the right spindle
The right spindle is further back than the left spindle
The thrust line is to the driver's side of the geometric centre line
The thrust line is to the passenger side of the geometric centre line
Positive camber places most of the vehicle load on which wheel bearing?
Inner wheel bearing
Outer wheel bearing
Both wheel bearings
Neither wheel bearing
Rear toe should always be measured to establish:
Thrust angle
Centre line
Suspension height
Frame angle
Positive scrub radius is a direct result of S.A.I (steering axis inclination) and __________________ working together.
Caster
Camber
Toe
Set back
If camber is unequal side to side, the vehicle will pull in which direction?
The side with the most camber
The side with the least camber
Neither side, camber is not a pull angle
You're performing an alignment on a vehicle and find that the right front caster is +1.0 degree and the left front caster is +2.0 degrees. Will the vehicle have a pull?
Yes to the left
Yes to the right
No caster is not a pull angle
No, this is to compensate for road crown
What alignment angle will have the greatest effect on tire wear?
Camber
Caster
Toe
Included angle
A disadvantage of positive caster is?
Road shock
Steering returnability
Wander
Directional stability
_____________ is the angle of the wheel from vertical when viewed from the front of the vehicle.
Camber
Caster
Toe
Steering axis inclination
Included angle is calculated by:
Camber plus caster
Camber plus S.A.I
Caster plus S.A.I
Caster plus toe
Feathering of a tire from the inside to the outside (low spot of the tread block inside, high spot of the tread block outside) is caused by what?
Excessive toe out
Excessive toe in
Excessive positive camber
Excessive negative camber
Which of the following statements are correct:
Toe adjustments affect steering wheel centering
Excessive toe-out settings cause the tires to wear on the outside edges
The vehicle will steer toward the side with the greatest toe-out
Front wheel toe is the first adjustment made during a four-wheel alignment
