Which control is demonstrated by the use of power shears, in place of grinding or oxy-acetylene cutting, where there is a risk of fire?

Installation of scaffolds, platforms, guardrails, shoring and bracing to support loads are examples of this type of risk control.

This type of risk control includes limiting the amount of time a person is exposed to a particular hazard, implementing safe working procedures for all hazardous tasks, and training all personnel.

Primary cause of accident that is characterized by the human action that departs from a standard or written job procedure or common practice, safety rules, regulations, or instructions.

The physical or chemical property of a material, machine or the environment which could result in injury to a person, damage or destruction to property or other forms of losses.

A risk associated with poorly guarded or dangerous equipment and machinery that may cause injury.

A risk associated with exposure to dangerous substance or conditions that may cause illness/disease.

An engineering control or PPE set that protect you after you fall which is characterized by stopping the fall before you hit the surface like net/mesh and/or body harness.

An engineering control or set of PPEs prevents you from falling like guardrails, covers, restraints, etc.

In the OSH standard, workrooms shall be at least how many meters in height from the floor to the ceiling?

Where the rooms are air-conditioned, and the process allows free movement; existing heights of not less than how many meters may be allowed?

The maximum number of persons employed in a workroom area shall not exceed one person per how many cubic meters?

The minimum width of passageways between machinery or equipment should not be less than how many meters?

According to OSH standards, this shall be the minimum width of stairs (including handrails).

What is the maximum clear height between sta

irway landings?

According to OSH standard, headroom shall be provided at all points in the stairwell, what is the minimum vertical clearance from the top of the tread in line with the face of the riser?

This is the minimum dimension of treads (exclusive of nosing and projections).

The riser should have a maximum height of how many centimeters?

In excavation safety, adequate shoring and timbering to prevent collapse shall be provided for excavation of depth more than how many meters?

At what excavation depth should the services of a Structural engineer for the design of the excavation be required?

Tools or materials shall be kept a minimum of how many meters away from the edge of the excavation to prevent them being knocked down into the excavation?

At what minimum distance from a 9-meter-deep excavation should a vehicle or other machinery be driven, operated, or located (measured from the edge of the excavation)?

Timber/bamboo scaffoldings shall be limited to a height of how many meters from the ground or base?

Fall protection equipment shall be required when working at what minimum height?