Font size
WorksheetsPlumbing Code (History and Chapter 1)
Total questions: 75
Worksheet time: 1hrs 9mins
During the __________, Philippines took its first step in plumbing profession.
17th Century
15th Century
18th Century
16th Century
Spaniards established ___________ to be a model community using
European standards in plumbing installations.
Intramuros
Fort Santiago
Vigan
Paco, Manila
Plumbing took a great leap at the turn of the 20th century with the arrival of the American
professionals. ____________ issued a letter of instruction on proper waste disposal in all
municipalities
Governor General William Howard Taft
Governor General Theodore Roosevelt
Governor General Francis B. Harrison
Governor General Henry L. Stimson
In 1902, the (a) was duly recognized by the government in the City of Manila.
In ______, the Plumbing Trade was duly recognized by the government in the City of Manila.
1910
1920
1901
1902
Master Plumber (a) became the first Chief of the Division of Plumbing Construction and
Inspection.
Master Plumber John F. Haas became the first _______.
Chief of the Division of Plumbing Construction and Inspection
Chief of the Division of Plumbing Inspection and Construction
Chief of the Division of Plumbing Sanitary and Waterworks
Chief of the Division of Plumbing Construction and Sanitary Works
A Plumbing Code based on the Plumbing Code of the (a) was incorporated into the Building Code for the City of Manila.
In 1935, Francisco Geronimo, Mariano de Ocampo, lgmidio Suarez, Eusebio Mina. Jose Rivera, Raymundo
Reyes and other founders formally organized the (a) .
Initiated by (NAMPAP), _________ , the “Plumbing Code of the City of Manila” was enacted
and placed under the Department of Public Services, Manila.
Manila City Ordinance 2411
Manila City Ordinance 2141
Manila City Ordinance 2114
Manila City Ordinance 2410
What is the Manila City Ordinance 2411?
(a)
In 1954, the Third Congress of the Republic of the Philippines in its Second session, approved after the third
reading House Bill No. 962. This became ___________, otherwise known as the "PLUMBING LAW OF THE PHILIPPINES.
Republic Act No.1873
Republic Act No.1738
Republic Act No.1387
Republic Act No.1378
The "PLUMBING LAW OF THE PHILIPPINES" was signed by President Ramon Magsaysay on what date?
June 18, 1955
June 18, 1954
June 19, 1955
June 17, 1957
Who signed R.A. 1378, otherwise known as the "PLUMBING LAW OF THE PHILIPPINES"?
Pres. Carlos P. Garcia
Pres. Ramon F. Magsaysay
Pres. Diosdado P. Macapagal
Pres. Manuel A. Roxas
On ______, the National Plumbing Code of the Philippines prepared by the NAMPAP was promulgated and approved by Malacanang. NAMPAP also assisted in the passage of the law creating the NAWASA.
January 28, 1959
June 18, 1955
June 19, 1957
July 28, 1959
What is NAWASA?
(a)
In ______, the board of examiners for master plumber and the NAMPAP prepared a Curriculum for
Plumbing Engineering that was approved by the Department of Education and was first introduced at the Feati
University.
1966-1969
1967-1970
1960-1970
1965-1968
A Curriculum for Plumbing Engineering was first introduced at the (a) .
What was the first approved amendment to the National Plumbing Code?
PVC as an approved plumbing material
Inclusion of "Asbestos·Cement Pipe" as an approved plumbing material
Multiple-user toilet facilities to serve all genders are now permitted
Accommodations for mounted roof top solar panels over vent terminals is added.
In 1996, NAMPAP President _______ spearheaded the updating of the Revised National
Plumbing Code.
Jaime Cruz
Valentino Mangila
Jaime M. Cabase
Reynald B. Ilagan
The Professional Regulation Commission (PRC) adopted the Revised Plumbing Code of 1999 which President Joseph Estrada approved December 21, 1999 pursuant to Section 4 of Republic Act (a) known as the Plumbing Law.
What is Republic Act 1378? ________ ___ of the ___________
(a)
When did President Joseph Estrada approved the Revised Plumbing Code?
February 21, 1999
December 21, 1990
December 21, 1999
June 21, 1998
Who is the president who approved the Revised Plumbing Code?
(a)
When did Jaime M. Cabase spearheaded the updating of the Revised National Plumbing Code?
1995
1996
1997
1998
Who is the Chairman of the Board of Master Plumber 2014?
Valentino M. Mangila
Pedrito D. Camilet Jr.
Reynald B. Ilagan
Jaime Jayjay E. Cruz
Who is the Chairman of the Board of Master Plumber 2022?
Valentino M. Mangila
Pedrito D. Camilet Jr.
Reynald B. Ilagan
Jaime Jayjay E. Cruz
Who are the Board of Master Plumber 2022?
Prospero A. Abellano
Reynald B. Ilagan
Pedrito D. Camilet Jr.
Jaime Jayjay E. Cruz
Who is currently spearheading the Revision of the Plumbing Code of the Philippines?
Pedrito D. Camilet Jr.
Reynald B. Ilagan
Jaime Jayjay E. Cruz
Valentino M. Mangila
All premises intended for human habitation, occupancy or use shall be provided with a supply of pure and wholesome water, neither connected with unsafe water supplies nor subject to hazards of backflow or back- siphonage. What number?
1
2
3
4
5
Plumbing shall be designed and adjusted to use the minimum quantity of water consistent with proper
performance and cleaning. What number?
1
2
3
4
5
Plumbing fixtures, devices and appurtenances shall be supplied with water in sufficient volume and at pressure
adequate to enable them to function satisfactorily and without undue noise under all normal conditions of use. What number?
1
2
3
4
5
Every building having plumbing fixtures installed and intended for human habitation, occupancy or use on premises
abutting on a street, alley or easement where there is a public sewer, shall be connected to the sewer system. What number?
1
2
3
4
5
Devices for heating and storing water shall be so designed and installed as to prevent dangers from explosion
through overheating. What number?
1
2
3
4
5
All premises intended for human habitation, occupancy or use shall be provided with a (a) , neither connected with unsafe water supplies nor subject to hazards of backflow or back - siphonage.
Plumbing fixtures, devices and appurtenances shall be supplied with water in (a) to enable them to function satisfactorily and without undue noise under all normal conditions of use.
Plumbing shall be designed and adjusted to use the (a) consistent with proper
performance and cleaning.
Devices for heating and storing water shall be so ________ ___ __________ as to prevent dangers from explosion through overheating.
(a)
Every building having plumbing fixtures installed and intended for human habitation, occupancy or use on premises
abutting on a street, alley or easement where there is a public sewer, shall be connected to the _____ ______.
(a)
Each family dwelling unit on premises abutting on a sewer or with a private sewage-disposal system shall have atleast one water closet and one kitchen-type sink. Further, a lavatory and bathtub or shower shall be installed to meet the basic requirements of sanitation and personal hygiene. What number?
6
7
8
9
10
Plumbing fixtures shall be made of smooth non-absorbent material, free from concealed fouling surfaces and
shall be located in ventilated enclosures. What number?
6
7
8
9
10
The drainage system shall be designed, constructed and maintained to safeguard against fouling, deposit of solids, clogging and with adequate cleanouts so arranged that the pipes may be readily cleaned. What number?
6
7
8
9
10
All pipings of plumbing systems shall be of durable NAMPAP-APPROVED materials, free form defective workmanship,
designed and constructed by Registered Master Plumbers to ensure satisfactory service. What number?
6
7
8
9
10
Each fixture directly connected to the drainage system shall be equipped with a water-sealed trap. What number?
6
7
8
9
10
The drainage piping system shall be designed to provide adequate circulation of air free from siphonage, aspiration or forcing of trap seals under ordinary use. What number?
11
12
13
14
15
Plumbing systems shall be subjected to such tests to effectively disclose all leaks and defects in the workmanship. What number?
11
12
13
14
15
No substance which will clog the pipes, produce explosive mixtures, destroy the pipes or their joints or interfere unduly with the sewage-disposal process shall be allowed to enter the building drainage system. What number?
11
12
13
14
15
Proper protection shall be provided to prevent contamination of food, water, sterile goods and similar materials by backflow of sewage. When necessary, the fixture, device or appliance shall be connected indirectly with the building drainage system. What number?
11
12
13
14
15
No water closet shall be located in a room or compartment which is not properly lighted and ventilated. What number?
16
17
18
19
20
If water closets or other plumbing fixtures are installed in buildings where there is no sewer within a reasonable distance,
suitable provision shall be made for disposing of the building sewage by some accepted method of sewage treatment and disposal, such as a septic tank. What number?
16
17
18
19
20
Where a plumbing drainage system may be subject to backflow of sewage, suitable provision shall be made to prevent its overflow in the building. What number?
16
17
18
19
20
Plumbing systems shall be maintained in serviceable condition by Registered Master Plumbers. What number?
16
17
18
19
20
All plumbing fixtures shall be installed properly spaced, to be accessible for their intended use. What number?
16
17
18
19
20
Plumbing shall be installed by Registered Master Plumbers with due regard to the preservation of the strength of structural members and the prevention of damage to walls and other surfaces through fixture usage. What number?
21
22
20
19
18
Sewage or other waste from a plumbing system which may be deleterious to surface or sub-surface waters shall not be discharged into the ground or into any waterway, unless first rendered innocuous through subjection to some acceptable form of treatment. What number?
21
22
20
19
18
Each family dwelling unit on premises abutting on a sewer or with a private sewage-disposal system shall have at
least ______ and ______. Further, a lavatory and bathtub/ or shower shall be installed to
meet the basic requirements of sanitation and personal hygiene .
(a)
Each family dwelling unit on premises abutting on a sewer or with a private sewage-disposal system shall have at
least one water closet and one kitchen-type sink. Further, a ________ and _______ or _______ shall be installed to
meet the basic requirements of sanitation and personal hygiene .
(a)
All pipings of plumbing systems shall be of durable (a) , free form defective workmanship, designed and constructed by Registered Master Plumbers to ensure satisfactory service.
Each fixture directly connected to the drainage system shall be equipped with a (a) .
The drainage piping system shall be designed to provide (a) free from siphonage, aspiration
or forcing of trap seals under ordinary use.
(a) shall extend to the outer air and installed to pre-empt clogging and the return of foul air to the
building.
No substance which will clog the pipes, produce explosive mixtures, destroy the pipes or their joints or interfere unduly with the sewage-disposal process shall be allowed to enter the building (a) .
No water closet shall be located in a room or compartment which is not (a) .
Plumbing systems shall be maintained in serviceable condition by _________ ________ ________
(a)
List the keywords for the 22 Basic Principles of the Plumbing Code
(a)
A REGISTERED MASTFR PLUMBER SHALL MAINTAIN A PROFESSIONAL BEARING CONSISTENT WITH AN HONORABLE AND DIGNIFIED PURSUIT OF HIS/HER PROFESSION, ADHERING TO A SET OF CONDUCT BECOMING OF HIS/HER CALLING, AND SHALL NOT:
1. Act in an unprofessional manner and demand any remuneration other than his/her original charges except for additional services not covered in the basic contract;
2. Supplant another Registered Master Plumber after definite steps have already been taken toward his/her being commissioned to perform the contract;
3. Underbid another Registered Master Plumber by reducing his/her professional fees after being informed of the fees charged by the other Registered Master Plumber;
4. Take the advantage of a salaried government position to compete unfairly with a practicing Registered Master Plumber;
5. Allow the use of his/her License as Registered Master Plumber for a fee to an unlicensed Master Plumber in plumbing works without his/her personal supervision;
6. Injure falsely or maliciously, directly or indirectly, the reputation of another Registered Master Plumber by reviewing his/her work for the same client unless the professional services of the former have been officially terminated;
7. Advertise in self-laudatory language, act in any manner and engage in any practice which tend to bring dishonor to the dignity of the Registered Master Plumber, the National Master Plumbers Association of the Philippines (NAMPAP) and the plumbing profession.
Act in an unprofessional manner and demand any ____________ other than his/her original charges except for additional services not covered in the basic contract;
remuneration
services
compensation
money
Supplant another ________ after definite steps have already been taken toward his/her being commissioned to perform the contract;
Registered Master Plumber
Registered Civil Engineer
Registered Mechanical Engineer
Registered Technician
_________ another Registered Master Plumber by ________ his/her professional fees after being informed of the fees charged by the other Registered Master Plumber;
sabotaging, taking away
overbid, adding
underbid, reducing
underappreciate, deducting
Allow the use of his/her License as Registered Master Plumber for a fee to an (a) Master Plumber in plumbing works without his/her personal supervision;
Take the advantage of a (a) to compete unfairly with a practicing Registered Master Plumber;
(a) falsely or maliciously, directly or indirectly, the reputation of another Registered Master Plumber by reviewing his/her work for the same client unless the professional services of the former have been officially terminated;
Advertise in self-laudatory language, act in any manner and engage in any practice which tend to bring ______ to the dignity of the Registered Master Plumber, the National Master Plumbers Association of the Philippines (NAMPAP) and the plumbing profession.
disowner
dishonor
shame
disgust
Section 100 – Permit Required
- Any plumbing or drainage work for which a permit is required should acquire prior permits from the Office of the Building Official under DPWH, DILG or city mayors.
- All professional services of a licensed and registered master plumber shall be enlisted in accordance with RA. 1378.
TYPE "OKAY NAISAPUSO KO NA"
(a)
Section 102 – Application of Permits
A Registered and Licensed Master Plumber shall file an application at the office of the Building Official in behalf of the building owner. Every Application shall:
1. Identify & describe the plumbing work covered ;
2. Have the description of the land upon which the plumbing work is to be done;
3.Indicate the use or occupancy ;
4. Be accompanied by plans, drawings, diagrams, computations, technical specifications, & other pertinent data required by Administrative Authority;
5.Be signed by the Owner or permittee;
6. Be signed & sealed by the Registered & Licensed Master Plumber.
Plans and Specifications:
All plumbing plans, drawings, diagrams, design analysis/computations as required, technical specifications, bill of materials & other required documents for all types of occupancy shall be prepared, signed & sealed by a Registered & Licensed Master Plumber, without limitation pursuant
to Republic Act 1378, as amended.
The above requirements shall be submitted in (6) sets
ILANG SET?
(a)
Section 103 – Permit Issuance
The Administrative Authority may issue Partial Permit for the construction of a part of a large and/or
complicated plumbing system before the entire plans & specifications for the whole system submitted or approve
Retention of approved plans, specifications, computations & other pertinent data:
• One (1) set for Administrative Authority;
• Two (2) sets returned to the Applicant;
• Two (2) sets returned to the Owner;
• One (1) set kept at the Jobsite
Expiration:
• Not commenced within one (1) year from date of issuance;
• Within 120 days if the work is suspended or abandoned.
• Renewal of plumbing permit requires a fee equivalent to 50% of the original fee.
ILANG DAYS BAGO MAEXPIRE ANG PERMIT KAPAG SUSPENDED? Type number only
(a)
Section 105 – Inspections
General
• No portion of any plumbing system shall be concealed until inspected & approved.
• All Administrative Plumbing personnel, Plumbing Inspector shall be a Registered Licensed Master Plumber
Operation of Plumbing Equipment
• Use of plumbing equipment used in replacement should have a request filed with the administrative authority not more than 72 hours after such work and before any replaced system is concealed by permanent portion of building.
Inspection Requests
• Shall be filed at least three (3) working days before such inspection is intended.
Re-inspections
• A fee will be charged on the applicant for each inspection or re-inspection.
How many days before should the inspection request be filed/ requested to the administrative authority? NUMBER ONLY
(a)
How many set of plan shall be submitted of the aforementioned requirements with each application for a permit signed and sealed by RMP?
5 sets
6 sets
7 sets
8 sets
A plumbing permit issued shall expire and become null and void if the plumbing work authorized therein is not commenced within _________________ from the date issued.
120 days
6 months
1 year
3 months
If the plumbing work is suspended or abandoned at any time after having been commenced for a period of? NUMBER ONLY
(a)
In case of renewal of a plumbing permit from the sanction due to expired permit what will be the equivalent fee
that shall be paid? NUMBER ONLY (Pwede decimal)
(a)
Where shall be the name of Registered and Licensed Master Plumber in a round shaped seal placed?
Upper portion of the round seal
Center of the Round Seal
Upper center of the round seal
Lower Portion of the seal
