Font size
WorksheetsRM Option - May Assessment
Total questions: 34
Worksheet time: 17mins
What tool is this?
Round saw
Coping saw
Tenon saw
File
What can you use to remove waste timber?
File
Rasp
Disc sander
All of the above
When marking out timber, what tool do you use to ensure a line is straight and at a right angle to edge of the timber?
Nothing
Ruler
Tri-square
Pencil
Name this tool
Tri-square
Ruler
Angle
Marker
Name the tool;
Hacksaw
Junior hacksaw
Tenon saw
Coping saw
Name the tool;
Machine vice
Bench hook
Bench vice
Engineer's vice
Name the tool;
Metal ruler
Measurer
Metal rule
Tape measure
Name this joint
Lap
Finger
Miter
Mortise and Tenon
Dovetail
what is Hazard?
Something with the potential to cause harm
The consequence of an event
the combination of likelihood and severity
the probability to cause harm
What is Risk Assessment
the combination of likelihood and severity of harm or damage created by a hazard
the formal process to identify and evaluate all risks created by hazards and introduce suitable control measures
Severity × Probability
Something with the potential to cause harm
Name the piece of equipment
Stand alone drill
Upright Drill
Hand drill
Pillar Drill
Name the equipment
(a)
Name the piece of equipment
Scrib
Pointer
Chisel
Hammer
What does deforestation mean?
Cutting down a few trees
To plant trees
Cutting down a large area of trees
To reuse tree
What does mass production mean?
products made in batch's
one off production
Products made on small scale
Products made on large scale
Which of these are manufactured boards?
MDF
Plywood
Plyboard
Stock board
What unit do we use in DT?
kilograms
millimeters
centimeters
meters
This sign means?
Wear a cool pair of sunglasses in this area?
Eye protection is required ( mandatory)
Dont forget your spectacles?
Name the tool shown.
Sanding Block
Sawing Board/bench hook
G-Clamp/Cramp
Sash Clamp/Cramp
Never _________ someone that is operating a machine.
Gloves
Distract
Brush
Return
Which of these should you do when using equipment?
A. Not talk to people.
B. Have your hair tied back.
C. Wear safety glasses when using machines.
D. All of these.
Goggles are worn in the workshop. Why ?
A. To see more clearly what you are doing.
B. To stop someone poking their finger in your eye.
C. To look cool.
D. You could get dust or particles in your eyes when using equipment.
What does CAD stand for?
Code and Design
Computer Aided Design
Create and Design
Craft and Design
Where do you put stools during a practical activity?
At your desk
Make sure you are sat down safely
Stack them at the back of the room
Sit on them when cutting
Why is recycling important?
It's a game
It's fashionable
We take care of the environment
What is the purpose of sanding wood?
Remove milling marks.
Smooth the surface and gets rid of splinters.
Prepare the surface for finishes.
Eliminate gouges and scratches.
All of the above.
Should you sand the surface of a board across the grain or with the grain?
Across the grain
With the grain
Which of the following is a plane?
Natural wood ______________________
comes from trees
is made by man
Manufactured wood ___________________
is manufactured by man.
comes naturally from trees.
Plywood has layers that are stacked ___________________.
in opposite directions
in the same direction
in varying directions
as many directions as possible.
What is the primary purpose of a G-Clamp?
To hold materials together
To measure angles
To cut wood
To sand surfaces
What safety equipment should be worn when using a saw?
Gloves
Goggles
Ear protection
All of the above
