WorksheetsIMI L1AM0102
Total questions: 20
Worksheet time: 7mins
Name
Class
Date
1.
A prohibition sign is associated with:
a)
Access or entry permission
b)
Action which is not allowed
c)
Action which is allowed
d)
Precautionary measures
2.
When using a trolley to transport a heavy component over uneven ground, it is important that the component is:
a)
Secured whilst moving
b)
Placed flat down
c)
Covered by a sheet
d)
Moved quickly
3.
The most important reason for cleaning the work area and putting tool and equipment that are no longer required is to:
a)
Enable a technician to get on with the next job
b)
Give the customer a good impression of the work-place
c)
Reduce the likelihood of accidents occurring
d)
Maintain the efficiency of a workshop technician
4.
Who should an accident or serious incident be reported to whilst at work?
a)
Nominated person
b)
Local council
c)
Senior technician
d)
Senior technician
5.
Which is the correct method of manually lifting a heavy load from low level?
a)
Feet apart, bended knees, keep back straight, and keep away from the load
b)
uFeet apart, bended knees, keep back straight, and keep close to the load
c)
uFeet apart, keep legs straight, lift with your hands, keep close to load
d)
Feet together, keep legs straight, lift with your back keep away from load
6.
When lifting a vehicle on a two-post lift, you should ensure that the:
a)
Front of the vehicle is between the lifting posts
b)
Wheels are centrally located between the lifting posts
c)
Vehicle's weight is centrally located between the lifting posts
d)
Rear of the vehicle is between the lifting posts
7.
A fire extinguisher with a cream coloured band should not be used on which type of fire?
a)
Textiles
b)
Wood and paper
c)
Live electrical
d)
Flammable liquids
8.
Diesel fuel is a hazard because it:
a)
Is highly contagious
b)
Can cause dermatitis
c)
Is hygroscopic
d)
Contains nitrogen
9.
Which one of the following is the most appropriate PPE to be used when moving a piece of heavy equipment?
a)
Ear defenders
b)
Safety goggles
c)
Safety helmet
d)
uSafety footwear
10.
Three elements necessary to produce a fire are:
a)
Carbon dioxide, nitrogen and a spark
b)
Oxygen, hydrogen and nitrogen
c)
Oxygen, fuel and a ignition source
d)
H2o, C02 and N0x
11.
What action should be taken if a piece of electrical workshop equipment keeps blowing the fuse when it is switched on?
a)
Attempt to repair the equipment yourself
b)
Report the fault to the supervisor
c)
Fit a larger capacity fuse in the plug
d)
Replace the plugs fuse with a bolt
12.
The tool shown in the image is known as:
a)
Rubber mallet
b)
Copper mallet
c)
Lump hammer
d)
Ball pein hammer
13.
The distance between two threads on a bolt is known as the:
a)
Height
b)
Depth
c)
Pitch
d)
Angle
14.
Which one of the following is measured in newton metres (NMs)?
a)
Temperature
b)
Velocity
c)
Torque
d)
Volume
15.
The tool shown in the image is known as:
a)
A posidrive screwdriver
b)
A flat blade screwdriver
c)
A Phillips screwdriver
d)
uAn electrical screwdriver
16.
A worn open-ended spanner should be:
a)
Used only on plastic nuts
b)
Filed to the next size up
c)
Discarded and replaced
d)
Used on larger bolt-head
17.
An engineer’s steel rule can be used to measure accuracy to within?
a)
0.01mm
b)
0.05mm
c)
0.5mm
d)
1mm
18.
The workshop equipment shown in the image is known as:
a)
A generator
b)
An air compressor
c)
A welding machine
d)
A used oil tank
19.
A split pin is used with which one of the following types of nut to produce a locking device?
a)
Castellated nut
b)
Nyloc nut
c)
Rigid nut
d)
Captivated nut
20.
A screw that cuts its own thread when turned is known as a self….
a)
Seating screw
b)
Locating screw
c)
Tapping screw
d)
Locking screw
100 %
