WorksheetsICS QUIZ - CHAPTER 1 PART 1
Total questions: 20
Worksheet time: 10mins
Which of the following connectors is commonly used for Ethernet networking?
USB Type-A
HDMI
RJ45
VGA
Which cable type is typically used to connect a computer to a monitor?
Coaxial Cable
VGA Cable
RJ11 Cable
SATA Cable
Which of these connectors is used primarily for audio and video transmission on modern televisions?
DVI
HDMI
DisplayPort
USB-C
What type of connector is commonly found on power supply units (PSUs) to connect to a motherboard?
Molex
ATX 24-pin
RCA
TRS
Which cable is commonly used to connect external storage devices like hard drives to a computer?
VGA
Ethernet
USB
HDMI
Which cable type is most commonly used to connect an internal hard drive to a motherboard?
SATA
USB
FireWire
S-Video
Which connector was commonly used for analog video output on computers before the adoption of HDMI and DisplayPort?
VGA
S-Video
DVI-A
Composite
Which of the following legacy connectors was commonly used to connect mice and keyboards to early PCs?
USB Type-A
PS/2
RS-232
FireWire
Which legacy port was primarily used for connecting external storage devices like hard drives and optical drives in the 1990s?
FireWire
SCSI
USB 1.1
PS/2
Which component on the motherboard is responsible for holding the CPU?
PCIe Slot
RAM Slot
CPU Socket
SATA Port
Which type of memory is directly installed on the motherboard?
SSD
Hard Drive
RAM
Cache
Which of the following is a common form factor for a motherboard?
ATX
SATA
PCI
IDE
Which of these ports on a motherboard is used to connect a graphics card?
SATA
USB
PCIe x16
RJ45
What is the role of the CMOS battery on a motherboard?
To power the CPU
To retain BIOS settings when the computer is off
To provide backup power for the motherboard
To power the RAM
Which of the following connectors on a motherboard is typically used for connecting storage drives like SSDs and HDDs?
SATA
PCIe
USB
HDMI
Which component is primarily responsible for cooling the CPU in a computer system?
Power Supply Unit
Case Fan
CPU Cooler (Heatsink and Fan)
Graphics Card
What is the main purpose of thermal paste in a cooling system?
To prevent dust from accumulating
To ensure efficient power supply
To improve heat transfer between the CPU and the cooler
To reduce noise from the fans
Which type of cooling system typically includes radiators, pumps, and coolant?
Air Cooling
Liquid Cooling
Passive Cooling
Heat Pipe Cooling
Which material is commonly used for heatsinks due to its excellent thermal conductivity?
Plastic
Copper
Steel
Rubber
What is the primary advantage of using a liquid cooling system over an air cooling system?
Lower power consumption
Easier installation
Better cooling performance and quieter operation
Reduced system weight
