Setting the safety guard of the bandsaw can be done while the machine is on.

While cutting with the bandsaw you should never twist, bend or deflect the blade.

The wood should be flat on the table while making cuts with the bandsaw.

Control devices such as push sticks, miter gauges or fences can be used to increase safety of the bandsaw.

It is safe to use your hands to clean sawdust and scrap wood off the bandsaw while the blade is moving

Wood should be pushed through the machine at a slow and steady rate.

The safety guard should be set/checked every time you use the machine.

Before using the Band Saw, you should:

Before cutting, you should check the material for foreign ____________.

Set the blade guard ________ of an inch above the piece to cut.

Check to see that all safety _________ are in place and in working orders (choose the best answer)

You can mark cut lines clearly while you are using the band saw.

What is the minimum distance to keep your fingers away from the band saw while it is moving?

When you are finished using the Band Saw, you should

When holding material to be cut by the Band Saw, you should

When cutting a tight curve, you should:

When cutting on the band saw