WorksheetsQuiz for Round 2
Total questions: 15
Worksheet time: 11mins
What is the MINIMUM REQUIREMENT of Contour survey extending outside the boundary wall on all sides :
up to at least 2 m
up to at least 5 m
up to at least 10 m
None
For Field Test , Significant depth of Exploration For Pile fdn :
1m to 5m
5m to 15m
20m to 35m
Wind, earthquakes, heat, impacts, rain, and snow are all examples of ___________.
External Forces
Internal Forces
Weather
All of Above
The reduced bearing of a line is N 87° W. Its whole circle bearing is
87°
273°
93°
3°
The standard size of bricks as per Indian Standards is
230 × 120 × 80 mm
200 × 100 × 100 mm
190 × 90 × 90 mm
190 × 100 × 100 mm
Soil Mechanics is a branch of
science that deals with the physical properties of soil
science that deals with response of soils subjected to time-dependent (dynamic) loads
interactions of climate, geology and management.
science that deals with chemical characteristics of soil
A land is said to be water-logged when ?
it is submerged in flood
the air circulation is stopped in the root zone due to the rise in water table
the soil pores within a depth of 40 cm are saturated
all of the above
The spacing of stirrups, near the support is
Minimum
Maximum
Between Minimum and Maximum
Zero
The sleepers in the form of two bowls placed under each rail and connected together bar, are known as ?
pot sleepers
box sleepers
plate sleepers
duplex sleepers
The amount of reinforcement for main bars in a slab is based upon
Minimum shear force
Maximum shear force
Minimum bending moment
Maximum bending moment
Choose the correct type of Portland Cement
Ordinary Portland Cement
Low Heat
Sulphate - Resistance
All of Above
Non of Above
What is the primary purpose of a foundation in construction?
To support the structure
To provide insulation
To enhance aesthetics
To resist wind loads
In structural engineering, what does the term 'deflection' refer to?
The bending of a beam under load
The vertical distance a structure moves
The angle of inclination of a structure
The amount of reinforcement used
High turbidity of water can be determined by ?
turbidity tube
Jacksons turbidimeter
Baylis turbidimeter
Hellipe turbidimeter
Which of the following statement is correct ?
In an impulse turbine, the water impinges on the buckets with pressure energy
In a reaction turbine, the water glides over the moving vanes with kinetic energy
In an impulse turbine, the pressure of the flowing water remains unchanged and is equal to atmospheric pressure
In a reaction turbine, the pressure of the flowing water increases after gliding over the vanes
