is one of the primary working documents used by a contractor to execute a project.

(a)  

are the written documents that go with the construction documents and describe the materials as well as the installation methods.

(a)  

give the 5 main categories under Plumbing notes and Specifications. (in order)

(a)  

various commodities used in the plumbing industry.

(a)  

alternative commodities used in plumbing.

(a)  

initial stage of installation for plumbing. It involves the installation of the necessary components.

(a)  

T and G ASTM C-14 and ASTM-75 respectively.

(a)  

ASTM A-74 for soil pipe, waste pipe, and vent pipes.

(a)  

Federal spec. QQ-56 or epoxy mix A and B

(a)  

Schedule 40 for all hot and cold water lines.

(a)  

American Standard brand. All toilets shall be of Acacia Evolution close coupled model except the second floor owners toilet which shall be Neo Modern close coupled touchless type. Vitreous china angle valves. White in color.

(a)  

Kohler brand, Parliament Semi-recessed with a single faucet hole, vitreous China material.

(a)  

Kohler brand, cast iron acid resisting enameled finish inside. With back complete with chrome finish U.S fittings and accessories.

(a)  

Sefa brand, Brent-420 model in 304 stainless steel material and Birke brand.

(a)  

Sefa brand, or any approved equal, in 304 stainless steel material.

(a)  

Floor drains shall be high grade strong, tough and even-graine metals with adjustable screwed cover nickel plated.

(a)  

a. For the owner's toilet, use Grohe brand, Model 247001 glossy brass material, with 3-valve diverter.

b. for other toilets, use Kohler brand, Taut model, brass materials in chrome finish with 2-valve diverter.

(a)  

are receptacle water, liquid, or water-carried wastes and discharge them into the drainage system.

(a)  

give the 6 plumbing fixtures (in order)

(a)  

is a plumbing fixture used to convey organic body waste to the plumbing system.

(a)  

water closets are classified according to:

(a)  

water closets must posses the following qualities:

(a)  

intended for installation on limited space

(a)  

more comfortable but required larger space. It also has large amount of standing water inside the bowl that is more sanitary and easier to maintain.

(a)  

the cheapest, smallest and simplest form of water closet.

(a)  

designed without a water tank and installed flat on the floor.

(a)  

least efficient, noisiest, and less expensive type of water closet.

(a)  

is more expensive than washdown. It is efficient but moderately noisy but less likely to be clogged.

(a)  

water closet is more expensive than wash down and reverse type, but it is more efficient in service. It is very sanitary and easier to clean.

(a)  

very expensive, less noisy, and most expensive. It flushes by whirlpool motion, followed by a flush down of liquid and waste completely.

(a)  

which is sometimes referred to as DFV is installed in places where water supply has high pressure and is sufficient.

(a)  

a bowl or basin used for washing face and hands.

(a)  

the basin of a lavatory may be of the following form:

(a)  

what materials can be used in a lavatory? (in order)

(a)  

are now designed not only for one person, but large enough to accommodate bathing couples.

(a)  

is a fixture that appears more likely a water closer. It is designed for cleaning the most delicate and well-guarded part of the body.

(a)  

is a plumbing fixture, usually attached to a wall, for urination.

(a)  

usually made of vitreous china. It offers far more privacy because it accoommodates one user at a time.

(a)  

usually made of stainless steel. it can accommodate multiple users simultaneously but requires a single waste pipe.

(a)  

is a bowl-shaped plumbing fixture commonly utilized for dishwashing, washing hands, rinsing and more.

(a)  

kitchen sinks are made from either of the following materials:

(a)  

less than 6 inches in depth

(a)  

depth of 6 inches, up to 12 inches.

(a)  

types of kitchen sink: (in order)

(a)