NEW
Font size
WorksheetsGMS Sewing Machine Parts Quiz
Total questions: 28
Worksheet time: 31mins
What part of the sewing machine guides the thread from the spool to the needle?
Bobbin Case
Thread Guides
Presser Foot
Throat Plate
Which component holds the bobbin and is placed beneath the throat plate?
Bobbin Case
Spool Pins
Hand Wheel
Tension Dial
What is the function of the foot pedal control on a sewing machine?
It holds the fabric down against the feed dogs
It regulates the starting, running, and stopping of the machine
It adjusts the tightness or looseness of the thread
It controls the up-and-down movement of the needle
Which part of the sewing machine is a metal plate under the needle that holds seam allowance markings for accurate sewing?
Throat Plate or Needle Plate
Bobbin Area
Take-Up Lever
Presser Foot
What is the purpose of spool pins on a sewing machine?
To hold the bobbin
To hold the spool of thread while sewing
To control the stitch length
To adjust the tension of the thread
Which part of the sewing machine controls the up-and-down movement of the needle?
Hand Wheel
Tension Dial
Presser Foot Lifter
Power & Light Switch
What is the function of the presser foot on a sewing machine?
It holds the fabric down against the feed dogs while sewing
It guides the thread from the spool to the needle
It holds the bobbin in place
It controls the stitch length
Which dial on a sewing machine adjusts the tightness or looseness of the thread?
Stitch Length Dial
Tension Dial
Hand Wheel
Presser Foot Lifter
What is the purpose of the backstitch button on the sewing machine?
To control stitch speed
To raise and lower the needle
To hold fabric flat as it is being sewn
To make stitches go in the reverse direction
What part of the sewing machine holds the bobbin in place?
Bobbin Winder
Needle
Bobbin Case
Bobbin Storage
What is this part of the sewing machine?
Needle Position
Hand Wheel
Bobbin
Foot Pedal
What sewing machine part is this?
Backstitch
Spool
Bobbin
Spool pin
What sewing machine part is this?
Presser foot
Foot pedal
Backstitch button
Feed dog
What sewing machine part is this?
Foot pedal
Presser foot
Bobbin
Take Up Lever
What sewing machine part is this?
Take up lever
Needle Threader
Feed Dog
Speed Control
The raised metal shaft with blue thread running through is the _______________
presser foot lever
presser foot
needle
feed dog
When turning a corner (pivoting), move the needle ______ into the fabric and lift the presser foot up so that you can turn the fabric and make a sharp corner.
to the right
to the left
up
down
Always turn the handwheel ____ from you.
away
towards
What is the main purpose of the Feed Dogs on a sewing machine?
To cut the thread after sewing.
To hold the spool of thread.
To move the fabric forward during stitching.
To adjust the tension of the upper thread.
What is the purpose of a Bobbin in sewing?
To cut fabric
To hold lower thread in the sewing machine
To iron and press fabric
To mark fabric
What does the presser foot do on a sewing machine?
Adjusts the width of zigzag and other two dimension stitches.
Covers the area around the needle.
Holds the fabric in place as the machine stitches.
Adjusts the speed of the sewing machine.
Where is the bobbin located in the sewing machine as shown in the image?
Underneath part number 5.
Next to part number 11.
Behind part number 17.
Inside part number 1.
This part allows you to raise and lower the presser foot. What part am I?
Presser Foot Lever
Presser Foot
Spool Pin
Foot Pedal
The presser foot lever should always be down when beginning to sew.
True
False
What should you do at the beginning and end of each stitch?
Pivot.
Touch your nose.
Backstitch.
Change the stitch setting.
Which side of the tape on our machine do we line the raw edge of our fabric with?
Left Side
Right Side
When I put in my bobbin case, it is ok to force it in.
True
False
What am I listening for when I put the bobbin case in my machine?
Nothing
A click
A squeak
Grinding
