Worksheets9189 - 310 - D&R PART 2
Total questions: 56
Worksheet time: 28mins
What is a key requirement for a building to be suitable for a micro-combined heat and power (mCHP) system?
The building should have a low demand for heating.
The building should have a high demand for heating.
The building should have poor insulation.
The building should be small in size.
Why is a building with good and effective insulation not normally suitable for a micro-combined heat and power (mCHP) system?
It is too expensive to install.
It is unlikely to have a high demand for heating.
It requires too much maintenance.
It is not energy efficient.
What is the relevance of Building Regulation A?
Where components affect the load placed on the structure of the building or excavations are close to the building
Where holes for pipework reduce the fire-resisting integrity of the structure
Water efficiency
Installation of supply and control wiring for the system
Which Building Regulation is concerned with fire safety?
A
B
C
E
What does Building Regulation C address?
Resistance to sound
Sanitation, hot water safety, and water efficiency
Resistance to contaminants and moisture
Heat producing appliances
Which Building Regulation is related to water efficiency?
G
J
L
P
What is the focus of Building Regulation L?
Electrical safety
Conservation of fuel and power
Heat producing appliances
Resistance to sound
When is planning permission not normally required for installing an mCHP in a domestic property?
When the work is external
When the work is internal
When the property is a listed building
When the property is in a conservation area
What should be checked with the local authority if the installation requires an external flue?
If the property is a listed building
If the work is internal
If it is classed as a permitted development
If the property is in a conservation area
What must be done if the property is a listed building or within a conservation area?
No action is needed
Check with the local authority for both internal and external work
Only check for external work
Only check for internal work
What do the Gas Safety (Installation and Use) Regulations require?
A plumber to install the gas supply
A Gas Safe engineer to carry out the installation
An electrician to oversee the installation
A building inspector to approve the installation
What is the main concern of the Water Supply (Water Fittings) Regulations?
Reducing water usage
Avoidance of contamination of potable water
Increasing water pressure
Installation of water meters
What is the G83 regulation related to?
Connecting the generator to the system
Safety measures for electrical appliances
Energy efficiency standards
Environmental protection guidelines
When should the Microgeneration Certificate Scheme be referred to?
When installing solar panels
When electricity is generated
During power outages
When purchasing electrical equipment
What is one benefit of mCHP regarding electricity production?
It depends on the direction of the property.
It is not dependent on weather conditions.
It requires constant sunlight.
It only works in warm climates.
What does the mCHP system generate while producing heat?
Water
Gas
Electricity
Steam
What financial incentive is available for mCHP systems?
Tax rebate
Feed-in tariff
Discounted installation
Free maintenance
How does mCHP compare to centrally generated electricity in terms of carbon savings?
It saves more carbon.
It uses more carbon.
It has no effect on carbon.
It doubles carbon emissions.
What impact does mCHP have on a property's carbon footprint?
Increases it
Has no effect
Reduces it
Doubles it
Which of the following is a limitation of mCHP?
It has a high initial installation cost.
It is suitable for all properties.
It has unlimited capacity for electrical generation.
It is inexpensive to install.
What is one of the considerations when deciding on the suitability of a location for rainwater harvesting?
The color of the tanks
The amount of rainfall in the area
The type of soil
The distance from the nearest city
Why should above ground tanks be avoided in rainwater harvesting?
They are more expensive
They are difficult to install
They are susceptible to freezing, warming, and sunlight
They require more maintenance
What is required if below ground tanks are used for rainwater harvesting?
Painting the tanks
Regular cleaning
Excavation work
Additional insulation
What is necessary for excavation work in rainwater harvesting?
Special permits
Access for excavation machinery
A large workforce
Advanced technology
What does Building Regulation C focus on in the context of rainwater harvesting?
Electrical safety
Resistance to sound
Resistance from contaminants and moisture
Sanitation and water efficiency
Which Building Regulation addresses water efficiency in rainwater harvesting?
E
G
H
P
What is the focus of Building Regulation H in rainwater harvesting?
Structure
Fire safety
Drainage and waste disposal
Electrical safety
When is planning permission generally not required for a rainwater harvesting system?
When it uses an above-ground tank
When it alters the outside appearance of the property
When it does not alter the outside appearance of the property
When the property is in a conservation area
What should you do if your rainwater harvesting system uses an above-ground tank?
Ignore local authority guidelines
Check with the local authority
Assume no permission is needed
Install without any checks
What is the purpose of the Water Supply (Water Fittings) Regulation 1999 in relation to rainwater harvesting systems?
To ensure the rainwater is clean enough for drinking
To avoid cross-contamination between rainwater and potable water
To regulate the amount of rainwater collected
To improve the taste of rainwater
Which of the following is a benefit of rainwater harvesting?
Increases the use of potable water
Increases water bills
Requires treatment prior to use
Reduces the use of wholesome potable water
What is one financial benefit of rainwater harvesting?
Increases water bills
Reduces water bills
Requires expensive equipment
Increases maintenance costs
Why is rainwater harvesting considered less complicated than greywater systems?
It requires more treatment
It is more expensive
It is less complicated
It uses more resources
What is one limitation of rainwater harvesting related to the collection area?
The volume of water is unlimited.
The volume of water is limited to the collection area.
The volume of water is always sufficient.
The volume of water is not affected by the collection area.
How does rainfall affect rainwater harvesting?
The volume of water is not affected by rainfall.
The volume of water is limited to the rainfall in the area.
Rainfall increases the storage capacity.
Rainfall has no impact on water collection.
What is a financial limitation of rainwater harvesting?
Low maintenance cost.
High initial installation cost.
No installation cost.
Subsidized installation cost.
What should be fitted to the property for rainwater harvesting?
A solar panel.
A water meter.
A wind turbine.
A gas meter.
What is a necessary condition for the installation of a greywater reuse system?
A suitable supply of greywater should be available.
The system should be installed indoors.
Greywater should be treated with chemicals.
The system should be connected to the main water supply.
Where should storage tanks for greywater be located?
In direct sunlight
Away from light and heat
Near a heat source
In a brightly lit area
What should be considered regarding the space for storing greywater?
It should be underground.
It should be suitable and available.
It should be above ground.
It should be in a public area.
How should storage tanks be protected?
From rain
From frost
From dust
From animals
Which building regulation is concerned with the structural integrity of a building when components affect the loading placed on it?
A - Structure
B - Fire safety
C - Resistance to contaminants and moisture
D - Resistance to sound
What is the relevance of Building Regulation B?
Water efficiency
Installation of supply and control wiring for the system
Where holes for pipework reduce the fire-resisting integrity of the structure
Where waste pipes are connected to the drainage system
Which regulation addresses water efficiency?
G - Sanitation, hot water safety and water efficiency
H - Drainage and waste disposal
P - Electrical safety
E - Resistance to sound
What does Building Regulation H focus on?
Fire safety
Drainage and waste disposal
Electrical safety
Resistance to sound
When is planning permission generally not required for a greywater reuse system?
When the system is above ground level
When the property is listed
When the system is installed underground
When the property is in a conservation area
What should be done if the greywater reuse system is above ground level?
Ignore local authority regulations
Check with the local authority
Automatically proceed with installation
Install without any permissions
In which situation is planning permission required for a greywater reuse system?
If the system is underground
If an outhouse is required to house the storage system
If the property is not listed
If the system is in a non-conservation area
Who must be informed prior to any greywater reuse installation?
The local authority
The property owner
The water supplier
The electrical company
What is one of the benefits of greywater reuse?
Increased water bills
Reduction in water bills
Increased demand for potable water
Limited system designs
How does greywater reuse affect the demand for wholesome potable water?
Increases the demand
Has no effect
Reduces the demand
Makes water non-potable
What is a potential benefit of greywater reuse related to system designs?
Limited system designs
A wide range of system designs
No system designs available
Only one system design
What is one limitation of greywater reuse?
Short payback period
Easy integration with existing systems
Long payback period
Suitable for all appliances
Why might greywater reuse contribute to a property's carbon footprint?
It requires no filtering
It requires filtering and pumping
It is used for drinking
It is naturally clean
What is a potential risk associated with greywater reuse?
Cross-contamination
Increased water purity
Reduced water usage
Enhanced taste
What must be fitted when using greywater systems?
A new faucet
A water meter
A solar panel
An air filter
![Drainage & Sanitation [PICTURES QUIZ]](https://cf.quizizz.com/image/image-loader.svg)
