Font size
WorksheetsWorkshop Theory1
Total questions: 38
Worksheet time: 27mins
Identify the hand tools shown in the picture.
Dead blow hammer
Soft face hammer
Rubber mallet
Engineering hammer
Which of the following tools use to tighten and un tighten screws.
Name the three different types of the tools that use to tighten and un tighten the screws.
(a)
Name the tools shown in the given picture.
Long nose plier
Side cutter plier
Combination plier
Diagonal cutter pliers
Name the socket wrench accessory shown in the given picture.
(a)
Identify the tools shown in the given picture.
Adjustable wrench
Combination wrench
Pipe wrench
Monkey wrench
Name the tools shown in the given picture.
(a)
Name the sockets in the given picture
(a)
A _________ ___________ is used to take a count of quantitative data, such as weight, length, time or temperature.
(a)
Identify the tools shown in the given picture.
Right angle ruler
Metal ruler
Level Ruler
Geometric ruler
Identify the tools shown in the given picture.
Vernier caliper
Caliper
Scrabber
Metal scraber
Identify the tools shown in the given picture.
Wrench extension
Bore gauge
Spindle wrench
Bore T gauge
What is the name of the tools use to measure the exact right angle of two objects joined together
Right angle ruler
Right angle plate
Level gauge
Right angle fluid level
What is the function of the tool shown in the picture.
Height gauge
Vernier height gauge
Depth Gauge
Vernier Depth Gauge
AWG is a tool use to measure the cross section of an electric cable or wire. What is AWG stand for?
Allow wire gauge
American width gauge
American wire gauge
American wiring gauge
State the type of hand tools
hammer/screwdrivers/pliers/wrench
hacksaw/drill/grinder/files
hammer/files/screwdriver/hacksaw
State the types of cutting tools
hacksaw/pliers/files/chisel
hacksaw/chisel/files/grinders
hammer/files/chisel/grinder
state type of hammer
flat hammer/ball peen hammer/rubber mallet hammer
engineering hammer/ flat hammer/soft hammer
ball peen hammer/rubber mallet/soft face hammer
type of screwdrivers
flat / philip / torx
philip / round / flat
square / flat / round
Type of wrenchs
close wrench/ open wrench / flat wrench
open closed wrench / adjustable wrench / round wrench
adjustable wrench/pipe wrench/open box wrench
Types of files are
flat / round / square / triangle
round/ flat / close end file / square
round / half square / triangle/ flat
Taps and Dies are for cutting
external cuts and internal cuts
hole and flat surface
internal cuts and external cuts
Da torch can be used for
Used to cut woods and remove nails
Used to cut metal or heat nuts and bolts for easy removal.
Used to cut bolt and nuts and metal sheet.
Which one is the correct answer for Hand Tool Safety Rule
Clamp small work pieces in the vise when you are working with a tools.
When using a tools, grasp the handle correctly
Do not use a tool if the handle surface has splinters, burrs, cracks or splits.
Type of Measuring Tools are
Mechanical, Fluid and Electrical
Ruler, Vernier Calipers and Micrometer
dial Gauge, Height Gauge and Vernier Caliper
Ruler and Scare are used to.....
used to measure external and internal thread
used to measure thickness and length
used to measure lengths and other geometrical parameters.
Calipers are used to....
measure internal and external size
measure length and thickness
measure external and internal thread
Angle Plate is used to
measure the internal and external length
measure the length and sizes of the metal
measure the exact right angle of two objects joined together.
Dial Gauge is used to
measure the round shape of the material.
measure the trueness of the circular object, jumping off an object, etc.
measure the length of the circular object.
Type of mechanical fastener are
Non Fastener and Permanent Fastener
General Fastener and Thread Fastener
Non Fastener and General Fastener
State the TWO types of Non fastener
General Fastener and Thread Fastener
Mechanical Fastener and General Fastener
Thread fastener and Mechanical Fastener
General fastener are
bolt, nut, screw
keys, pins, retaining rings
pins, bolts, nuts
Three main category of thread fastener are
screw, stud and pins
bolt, stud and screw
key, pins and bolt
........ is a head at one end and threads on the other end and it is paired with nut
Bolt
Screw
Stud
...... is a rod that has threaded at both end and joins two mating parts. A nut maybe used at one end.
Screw
Stud
Key
1. Nora is working on a woodworking project. Sketch a typical taper and label the parts.
2. Describe the standard taper used in industry.
1. What are some operations involved in heat treatment of steel? Briefly discuss each.
