WorksheetsCarpentry EOPA Part 3
Total questions: 19
Worksheet time: 10mins
When constructing a built-in, where can one find specified sizes, shapes and finishes?
Builders can use personal judgment for these elements, so they are not specified anywhere
Written on the drywall for where the built-in will be placed
Project blueprints or plans
Owners decide these elements, SO the builder should leave them unfinished
Why is it important to adhere to industry standards during the installation of wood shingles and miter corners?
To increase project costs.
To ignore safety precautions.
To ensure Structural integrity.
To speed up the process.
What should always be included with an engineered lumber delivery?
Correct nails, hangers and engineered lumber saw blades
Engineering data and application drawing for the materials
Composite shims, post bases and hangers
Positive Placement Fasteners, Hangers and LVL Flat Lock Screws
In a finish schedule, what does the abbreviation “SQFT” stand for?
Surface Quality for Finishing Techniques
Square Footage
Structural Quality for Flooring Treatments
Standard Quantity for Finishing Tasks
How accurate would a 300’ water level be over a 225’ span?
Plus/minus 1/16”
Plus/minus 1/8”
Plus/minus 0”.
Plus/minus ¼”
Blueprints for closets should always specify which of the following?
Location and finish
Location only
Size location and finish
Size only
In construction terminology, what does the acronym “ROW” stand for?
Right-of-Way
Reclaimed Wood
Residential Overlay Zone
Record of Work
When installing accessories, how should the carpenter find their intended locations?
By looking on the accessory box
Accessories do not have intended locations
By watching a video on the topic
By viewing project blueprints or plans
Complete the following statement with the BEST choice to calculate the number of trusses needed for a simple roof, divide the distance between the end walls by _____ and _____ one.
24”, subtract
18”, add
18”, subtract
24”, add
When installing rakes, open cornice and box cornice, what factor should be the BIGGEST priority to follow?
Latest building trends
Discounts from suppliers
Adhering to the project blueprint
A video showing other types of finishes
What is the OSHA guideline for stacking lumber?
Hand stacked: 16ft, By forklift 20ft
Hand stacked: 9ft; By forklift: 12ft
Hand stacked: 7.5ft; By forklift: 12.5ft
Hand stacked: 16ft; By forklift: 18ft
What is the PRIMARY purpose of measuring, cutting and installing gypsum board?
To cause delays in the construction project
To experiment with various methods of installation
To ensure the product is installed correctly and meets the codes
To help create short cuts, saving time
Complete the following statement with the BEST choice.
When laying out a stair stringer with framing square with a 11” tread and a 7 ¼” rise, the inside of long side of the square should be set on ____and the inside of the short side should be set on_____.
Right, left
11,7 ¼”
7 ¼”, 11”
left, right
Where are web stiffeners or squash blocks used in l-Joists?
On the outside band surrounding the floor
At stairways and attic accesses
At point loads where heavy loads are supported
Around windows, doors and first floor sleeping areas
How accurate would a 300' water level be over a 225' span?
Plus/minus 1/16"
Plus/minus 1/8"
Plus/minus 0"
Plus/minus 1/4"
Of the following, which plywood grade is the LEAST smooth for flooring?
A/C
A/B
CDX
Underlayment over plywood
When should floor joist bridging be nailed
when joists are installed
After the walls are installed
After sub-flooring is installed
Before flooring is installed
How much should end joints be offset between rows when installing subfloor or roof decking
16 inches
19.2 inches
32 inches
48 inches
hen straightening walls, what should be used on a 40-foot wall?
Plate Level
Straight Edge
Spacers and string at the top plate
Sighting the wall by eye in the inside.
