You are troubleshooting a communication problem. You seem to be able to communicate with Glen’s website by IP address, but not by the fully qualified domain name (www.gleneclarke.com). What is most likely the problem?

Which network service can be configured on your router that is responsible for assigning IP addresses to systems on the network?

What service on the network is responsible for converting the FQDN to an IP address?

What service on the network is responsible for verifying username and passwords when the user attempts to log on?

You are monitoring network traffic and you notice a number of DHCP discover messages on the network. Which of the following is the destination address of the DHCP discover message?

When a client system boots up and requests an IP address, it first must send out which message?

What device is responsible for regenerating the signal so that the signal can travel a greater distance?

Which device filters traffic by looking at the destination address of the frame and then forwards the frame to the port that the destination system resides on?

Which of the following is a layer-3 device?

A device that can send and receive information, but not at the same time, is said to be _________________.

A message that is sent out on the network and is destined for all systems is known as a __________________ message.

A message that is sent out on the network and is destined for a group of systems is known as a ______________ message.

A group of systems that can receive one another’s broadcast messages is known as a __________________.

You are monitoring network traffic and notice that there is a large number of broadcast messages sent across the wire. You would like to separate your network into multiple broadcast domains. How can you do this? (Select two.)

A group of systems that can have their data collide with one another is known as a ____________________.

Sue is having trouble understanding some network concepts and asks you to help identify address types. Which of the following is considered a layer-2 address?

You are troubleshooting communication to a network by looking at the link light on the switch. What layer of the OSI model are you troubleshooting when looking at a link light?

What layer of the OSI model is responsible for breaking the data into smaller segments?

Which of the following is considered a layer-3 address?

What layer of the OSI model is responsible for routing and logical addressing?

Which of the following are considered layer-2 devices? (Choose two.)

Which of the following are considered layer-1 devices? (Choose two.)

What is the application layer protocol for delivering e-mail across the Internet?

Which layer of the OSI model works with packets?

What is the application layer protocol for receiving e-mail over the Internet?

Which Gigabit Ethernet standard uses UTP cabling to reach 1000 Mbps?

Which 10 Gigabit Ethernet standard uses multimode fiber-optic cabling?

Which of the following addresses does a router use to determine where a packet needs to be delivered? (Choose two.)

Which layer of the OSI model works with frames?

What type of cable would you use if you wanted to connect a system to an RJ-45 port on a switch?

You wish to network two systems by connecting a computer directly to another computer. Which type of cable would you use?

You need to create a crossover cable. What wires would you cross on one of the ends?

You are testing communication to a router and have decided to connect your workstation to the Fast Ethernet port of the router. What type of cable would you use?

You have a UTP cable that has been configured at both ends with the 568B standard. What type of cable is it?

You wish to create a crossover cable and have wired one end of the cable with the 568A standard, What standard should you use to wire the opposite end of the cable?

Which of the following are considered class A addresses? (Select all that apply.)

Sue is reviewing IP addressing basics and asks you which of the following is considered a class A private address.

What is the default subnet mask of a system with the IP address of 189.34.5.67?

What is the default subnet mask of a class C address?

Which of the following is a class B private address?

Are the systems of 201.45.3.56 and 201.45.5.20 on the same network?

Which of the following addresses are considered invalid addresses to assign to a host on the network? (Select all that apply.)

The decimal number of 137 is which of the following in binary?

Are the systems with the IP addresses of 121.56.78.10 and 121.45.6.88 on the same network?

What is the default subnet mask of 130.56.78.10?

Your system has an IP address of 131.107.45.10. Which of the following systems is on the same network as you?

Which of the following addresses are considered invalid addresses to assign to a host on the network? (Select all that apply.)

The binary number of 01101101 is which of the following decimal values?

Which class address always has the value of the first bits in the IP address set to 110?

Which class address always has the first two bits of the IP address set to 10?

Which IP address class always has the first bit in the address set to 0?

Which protocol is responsible for converting the logical address to a physical address?

The ARP request is sent to which of the following layer-2 destination addresses?

What are the three phases of the TCP three-way handshake?

Which of the following does TCP use to guarantee delivery?

What TCP/IP protocol is responsible for logical addressing and routing functions?

Which transport layer protocol is responsible for unreliable delivery?

Which TCP/IP protocol is responsible for error and status reporting?

The router looks at which field in the IP header to decide where to send the packet?

What flags are set on the second phase of the three-way handshake?

Which flag is set in a TCP packet that indicates a previous packet was received?

You wish to allow echo request messages to pass through the firewall. What ICMP type is used in an echo request message?

Which of the following are fields found in the IP header? (Select all that apply.)

Which of the following are considered application layer protocols?

Which transport layer protocol is responsible for reliable delivery?

What ICMP type is used by the echo reply message?

The security administrator for your network has asked that you block ping messages from entering your network. What protocol would you block?

Which TCP flag is responsible for dropping a connection at any point in time?

Which of the following is the IPv6 equivalent to 127.0.0.1?

Your manager has been hearing a lot about IPv6 addressing, and asks you which of the following statements are true about IPv6 unicast addresses? (Select two.)

Which of the following is an example of an IPv6 link-local address?

Your manager has asked you what some of the benefits of transitioning from IPv4 to IPv6 are. (Select two.)

Your manager is evaluating IPv6 transitioning technologies and is wondering which IPv6 tunneling method encapsulates the IPv6 data into an IPv4 user datagram to travel over the Internet and can pass through NAT devices.

You are evaluation how you are going to slowly transition to IPv6. What three techniques can be used to allow migrating from IPv4 to IPv6? (Choose three.)

What IPv6 address type is similar to an IPv4 private IP address and starts with FC00?

SMTP uses which of the following ports?

FTP uses which of the following ports?

Which of the following represents the port used by POP3?

Which of the following are true statements about TCP ports? (Select all that apply.)

Which of the following are true statements about ports? (Select all that apply.)

Sue is unable to surf the Internet and calls you over to her desk to troubleshoot. You use ipconfig on the system and notice the following IP configuration. What is the problem?

Local Area Network Connection:

IPv4 Address…. … .: 169.254.34.56

Subnet Mask… …. .: 255.255.0.0

Default Gateway… …:

Bob is unable to surf the Internet and calls you over to his desk to troubleshoot. You use ipconfig on the system and notice the following IP configuration. What should you do?

Local Area Network Connection:

IPv4 Address…. … .: 192.19.210.79

Subnet Mask… …. .: 255.255.255.0

Default Gateway… …: 192.19.0.1

You are designing the IPv4 address scheme for the network. How do you calculate the broadcast address of a subnet?

Your manager would like you to subnet the 129.65.0.0 network into six different networks. What is your new subnet mask?

What is the subnet mask of 135.44.33.22/20?

You are designing the IP address scheme for your network and you need to subnet the 142.65.0.0 network into 12 different networks. What is your new subnet mask?

How many host bits are needed in order to support 1,010 systems on the network?

How many masked bits are needed in order to create at least 20 subnets?

You are designing your IPv4 address scheme. How do you calculate the network ID of a subnet?

How many hosts can exist on a network with the address of 180.45.10.20/20?

How many subnet bits do you need to create 6 networks?

Which option on the Cisco router indicates that you can use the first and last subnets of a subnetted network?

Which of the following subnet masks matched to the CIDR notation is correct?

Your system uses the IP address of 145.68.23.45/25. How many systems are supported on your network?

The Fast Ethernet port on a router is assigned the IP address of 131.107.16.1/20. How many hosts can exist on the subnet?

You want to assign your serial interface the third valid IP address in the second subnet of 192.168.2.0/26. Which IP address would you use?

You are designing the IP address scheme for a branch office that needs to support 92 systems on the network. What should your subnet mask be?

What is the minimum number of host bits needed to support 510 hosts on the network?

You wish to subnet 137.15.0.0 in order to support 8,190 hosts on each network. You wish to use the smallest subnet size to support this number of hosts. What will be the new subnet mask?

How many hosts can exist on a network with the address of 201.10.20.30/27?

With the goal of preserving addresses, which of the following subnet masks would you use to create a subnet of up to 60 hosts?

You have a system whose IP address is correctly configured for 198.45.6.87/27. You are now responsible for assigning an IP address to the router. Which of the following IP addresses should be assigned to the router?

What is the network ID for the third subnet of 220.55.66.0/27?

The 24.60.32.20/11 address is located in which of the following subnets?

You need to assign the fourth valid IP address of 107.53.100.10/12 to the Fast Ethernet port on the router. What address would you use?

A network administrator is working with the 195.34.56.0 network, which has been subnetted into 8 networks. Which of the following two addresses can be assigned to hosts on the same subnet? (Select two.)

What is the network ID of 190.53.159.150/22?

Which of the following statements are true of 205.56.34.53/28? (Choose three.)

What is the broadcast address of 107.50.100.10/12?

You need to assign the last valid IP address of 199.45.67.139/26 to the Serial port on your router. What address would you use?

What is the last valid address for the subnet of 220.55.66.64/27?

Which of the following addresses exists on the same network, knowing that all systems have a subnet mask of 255.255.255.240? (Select two.)

Which of the following statements are true of 190.88.122.45/19? (Choose three.)

Which of the following subnet masks would you typically use on a WAN interface to make the best use of address space?

Which IP feature allows you to use different subnet masks on different subnets within the network?

You are connecting two of your office locations together over a WAN link. Each office has a router with an IP address assigned. What should your subnet mask be in order to leverage the best use of address space?

Which of the following represents a purpose for the serial port on a Cisco router?

Which of the following port identifiers are used to reference a Fast Ethernet port? (Select two.)

What type of cable is used to connect to the console port?

Your manager notices an AUX port on the back of the Cisco router and asks what it is used for. How would you reply?

You are performing a security audit on the network devices and have verified that the console port has a password configured. What other port should you verify has a password?

You are configuring the DCE end of a point-to-point serial link between two routers. What extra command is typed on the DCE end of the link?

The external CSU/DSU connects to which port on the router?

What type of module can be purchased to install an internal CSU/DSU into the router?

Where is the running configuration stored?

Which of the following are stored in ROM on the Cisco device?

Which commands can you use to save the running configuration to the startup configuration? (Select two.)

When the Cisco router starts up, where does it find the Cisco IOS?

When you first boot up the Cisco router, where does it locate the startup configuration

You are connected to your switch and wish to remotely administer the Cisco router. Which com-mand would you use?

You are at the global configuration prompt and wish to configure a communication protocol for remote access to the router. What command would you type?

What command would you use to navigate from priv exec mode to user exec mode?

You wish to get help on which parameters exist on the ping command. How would you get a list of parameters?

What is the command to move to priv exec mode from user exec?

Which of the following prompts represents global configuration mode?

What is the default router name if a name is not assigned to the router during initial configuration?

What command would you use to navigate to global configuration mode?

What types of actions can an administrator perform at this IOS prompt? (Select two.)

R1(config-if)#

You wish to run the initial configuration dialog. What command would you use?

Under what conditions would the initial configuration dialog appear?

You have connected a computer to the console port of a brand new router. What will the router display on the screen after it is powered on?

What is the purpose of the POST?

You have rebooted your Cisco switch and it displays an amber light on the system LED during POST. What does this indicate?