Font size
WorksheetsHealth and Safety Quiz
Total questions: 55
Worksheet time: 55mins
What does PPE stand for in the context of vehicle maintenance safety?
Personal Protective Equipment
Professional Protective Equipment
Personal Prevention Equipment
Professional Prevention Equipment
What is the main purpose of COSHH regulations?
To manage health and safety at work
To control substances hazardous to health
To ensure fire prevention
To handle evacuation procedures
What does the abbreviation HSE stand for?
Health and Safety Executive
Health and Safety Environment
Health and Safety Evaluation
Health and Safety Education
What is the focus of the Health and Safety at Work Act (1974)?
Fire prevention and evacuation
Managing risks in automotive workshops
Ensuring health and safety at work
Handling hazardous substances
What does the term 'risk' refer to in the context of health and safety?
The likelihood of a hazard causing harm
The presence of hazardous substances
The need for personal protective equipment
The requirement for evacuation procedures
What is the purpose of the Health and Safety at Work Act 1974 (HSWA or HASAWA)?
To ensure employees are covered by health and safety regulations
To provide financial benefits to employees
To increase employee salaries
To reduce working hours
Which organisation is responsible for enforcing health and safety regulations in the workplace?
Health and Safety Executive (HSE)
World Health Organisation (WHO)
National Safety Council (NSC)
Occupational Safety and Health Administration (OSHA)
What year was the Health and Safety at Work Act introduced?
1974
1989
1992
1998
Which regulation deals with the provision and use of work equipment?
PUWER 1998
EAW 1989
PPE 1992
HSWA or HASAWA 1974
Which of the following is a health and safety responsibility for employees?
Ignore safety instructions from the employer.
Take reasonable care of your own and other people's health and safety.
Use faulty equipment without reporting.
Avoid cooperating with your employer on health and safety.
What should you do if you notice damaged electrical cables at work?
Ignore them and continue working.
Report them to your employer or supervisor.
Use them carefully without reporting.
Fix them yourself without any training.
Which act relates to the control of substances hazardous to health?
Lifting Operations and Lifting Equipment Regulations 1998.
Control of Substances Hazardous to Health Regulations 2002.
Health and Safety at Work Act 1974.
Personal Protective Equipment at Work Regulations 1992.
What is an accident according to the learning material?
A planned event
An unplanned event
A scheduled event
A routine event
What is a hazard as defined in the learning material?
Something that is safe
Something that has the potential to cause harm or injury
Something that is beneficial
Something that is harmless
Which of the following is a type of Personal Protective Equipment (PPE) used to protect the eyes?
Goggles
Gloves
Earplugs
Boots
What type of PPE is typically used to protect the hands in an automotive workshop?
Goggles
Gloves
Earplugs
Helmets
Which PPE is essential for protecting hearing in a noisy environment?
Goggles
Gloves
Ear Defenders
Boots
What is the primary purpose of wearing overalls in a workshop?
To protect the eyes
To protect the hands
To protect the body and clothing
To protect the feet
What should be removed when working in a workshop to prevent being tangled with machinery?
Safety goggles
Jewellery such as rings and watches
Steel-toed boots
Overalls
What type of footwear is required in a workshop environment?
Sandals
Trainers
Steel-toed boots
Flip-flops
Which item of PPE is required when using a pillar drill?
Safety goggles
Earplugs
Steel-toed boots
Leather gloves
What PPE is required when handling battery acid?
Leather gloves
Nitrile or rubber gloves
Woollen gloves
Cotton gloves
What is the first step in the squat lift method?
Stand as close to the load as possible, with feet shoulder-width apart.
Bend your knees, keeping your back straight.
Grip the load, using gloves if there are sharp edges.
Raise your head.
What should you do if the load is awkward to lift?
Use a trolley jack.
Ask someone to assist with the lift.
Use gloves.
Bend your knees.
Which of the following is NOT a function of a trolley jack?
Raising vehicles to gain access to components.
Removing power units.
Checking oil levels.
Removing transmission components.
What should you check for on all wheels of a hydraulic trolley jack?
Proper inflation.
Free to move and rotate.
Correct alignment.
Proper lubrication.
What is the correct positioning for a vehicle on a 4-post ramp?
Off-centre on the platform
Centred on the platform
Near the edge of the platform
At the rear of the platform
Which of the following is NOT a check for a 2-post ramp?
Ensure the vehicle is positioned with the centre of weight near the lifting posts
Check for free height above the vehicle
Ensure chocks are in place front and rear
Check for vehicle stability when just clear of the ground before lifting
What does SWL stand for in the context of vehicle hoists?
Safe Weight Limit
Standard Weight Load
Safe Working Load
Standard Working Load
What must be checked for in the tube of an axle stand?
Colour
Material
Cracking
Weight
What are the two main dangers caused by electricity?
Electric shock and fire
Water damage and rust
Noise pollution and vibration
Air pollution and dust
What checks should be carried out before using mains-powered tools?
Check for correct operation of the switch
Check for colour coordination
Check for battery life
Check for software updates
What is affected as the length of the lifting chain increases?
The weight it can safely lift
The colour of the chain
The speed of lifting
The noise level
What should be checked on a plug before use?
No loose wires.
The plug is clean.
The plug is new.
The plug is expensive.
What checks should be carried out on the casing of a plug?
No damage to casing.
The casing is colourful.
The casing is lightweight.
The casing is expensive.
What is the regulation concerning harmful substances in health commonly known as?
COSHH.
OSHA.
EPA.
NIOSH.
What are the three elements needed to start a fire according to the fire triangle?
Heat, Water, Fuel
Oxygen, Fuel, Heat
Fuel, Water, Carbon Dioxide
Heat, Light, Oxygen
The symbol shown indicates that a substance is?
Explosive
Flammable
Harmful to the environment
Toxic
What safety precaution is recommended when handling brake fluid?
Wear a mask
Wear gloves
Use a fire extinguisher
Keep in a cool place
What should you do first if you discover a fire?
Use a fire extinguisher
Shout
Call the fire brigade
Hide
Which TWO of the following is a potential hazard in a garage that could lead to a fire?
Using a compressed air blow gun
Draining petrol tanks
Cleaning a brake disc with brake cleaner
Applying grease to a bearing
What is the correct action to take if you hear the fire alarm?
Continue working
Gather your belongings
Leave the building immediately
Call your supervisor
What is the correct procedure for battery removal and replacement?
Disconnect the positive terminal first, then the negative.
Disconnect the negative terminal first, then the positive.
Disconnect both terminals simultaneously.
Disconnect the battery clamp first.
Which type of fire extinguisher should NOT be used on electrical fires?
CO2 gas
Water
Foam
Powder
Why should water or foam not be used on electrical fires?
They may cause electrocution.
They are not effective.
They are too expensive.
They are difficult to apply.
What should you do with tools lying on the floor in a workshop?
Leave them as they are
Return them to the toolbox or shadow board
Move them to a corner
Place them under the table
How should you handle oil spilt on the floor?
Ignore it
Clean the area using the designated procedure
Spread it around
Cover it with paper
What is the correct procedure for connecting a car battery?
Connect the negative lead first
Connect both leads simultaneously
Connect the positive lead first
Do not connect the leads
Who is responsible for taking away used engine oil and filters?
Workshop staff
Local contractor or licensed company
Any available person
The vehicle owner
Which of the following tasks would require you to wear safety goggles?
Drilling a hole in the car's bodywork
Using a computer
Using a Cold Chisel to remove an exhaust section
Fitting a road wheel
What type of fire extinguisher has a yellow panel?
Water
Foam
Carbon dioxide
Wet chemical
Which of the following must be used to support a vehicle when working underneath?
Trolley jack
Axle stands
Bricks
Wooden blocks
Which of the following safety checks would need to be carried out on a 240-volt mains-operated tool?
Check the lead for signs of cuts or damage
Replace the battery
Check the correct operation of the switch
Inspect the colour
Which of the following responsibilities is expected from an employee?
Provide your own personal protective equipment
Report any faulty equipment before using it
Fix the equipment yourself
Ignore safety signs
Which of the following is a human cause of accidents?
Working in poor lighting conditions
Using outdated machinery
Ignoring safety signs
Wearing protective gear
