wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

mCHP Systems and Water Conservation Quiz

Total questions: 37

Worksheet time: 19mins

Name
Class
Date
1.

What is one advantage of installing an mCHP system?

a)

It has high initial installation costs.

b)

It is not suitable for all properties.

c)

It saves carbon over centrally generated electricity.

d)

It has limited capacity for electrical generation.

2.

Which gas is often used as the internal gas in a Stirling engine?

a)

Oxygen

b)

Nitrogen

c)

Helium

d)

Carbon Dioxide

3.

What is a requirement for a building to make an mCHP system viable?

a)

The building should have low demand for space heating.

b)

The building should have a high demand for space heating.

c)

The building should be well-insulated.

d)

The building should have a small size.

4.

What are the two methods of water conservation commonly used in the UK?

a)

Desalination and water recycling

b)

Rainwater harvesting and grey water reuse

c)

Water purification and filtration

d)

Groundwater extraction and storage

5.

What is the target for reducing average drinking water consumption set by the Code for Sustainable Homes?

a)

150 litres per person per day

b)

80 litres per person per day

c)

103 litres per person per day

d)

125 litres per person per day

6.

Which type of water is suitable for human consumption according to the table?

a)

Rainwater

b)

Grey water

c)

Blackwater

d)

Wholesome, potable water

7.

Which of the following is NOT a use for harvested rainwater?

a)

Flushing toilets

b)

Drinking water

c)

Car washing

d)

Garden watering

8.

What is the first step in the process of rainwater harvesting?

a)

Filtration

b)

Storage

c)

Collection

d)

Reuse

9.

Which type of roof material may not be suitable for a rainwater harvesting system due to potential health risks?

a)

Copper

b)

Asphalt

c)

Wood

d)

Tile

10.

What is one factor that governs the amount of water harvested in a rainwater harvesting system?

a)

The color of the roof

b)

The size of the roof area

c)

The type of gutter used

d)

The height of the building

11.

What is the purpose of the in-line filter in the rainwater filtration process?

a)

To add minerals to the water

b)

To remove debris such as leaves

c)

To increase water pressure

d)

To change the water's pH level

12.

What is a requirement for above-ground storage tanks?

a)

They need excavation work

b)

They must be protected from freezing

c)

They require no protection from sunlight

d)

They are always smaller than below-ground tanks

13.

What is the function of a submersible pump in the rainwater storage system?

a)

To filter the water

b)

To heat the water

c)

To transport water from the storage tank to the point of demand

d)

To add chemicals to the water

14.

What is the main difference between direct and indirect distribution systems for reused rainwater?

a)

Direct distribution requires more storage space

b)

Indirect distribution uses more energy

c)

Direct distribution pumps water directly to outlets on demand

d)

Indirect distribution does not require a pump

15.

What is the classification of rainwater in terms of risk?

a)

Category 1 - Low

b)

Category 3 - Moderate

c)

Category 5 - Severe

d)

Category 7 - Extreme

16.

What is the usual method of preventing backflow between rainwater and wholesome water?

a)

Using a filter

b)

Installing a pump

c)

Using an AA air gap

d)

Adding chlorine

17.

What must be labeled on outlets supplying rainwater?

a)

Suitable for drinking

b)

Not suitable for drinking

c)

Contains chlorine

d)

Filtered water

18.

Which regulation applies to the installation of rainwater harvesting systems?

a)

Fire Safety Regulations 2005

b)

Water Supply (Water Fittings) Regulations 1999

c)

Electrical Safety Regulations 2010

d)

Building Code 2015

19.

What is the relevance of Building Regulation G?

a)

Fire safety

b)

Water efficiency

c)

Electrical safety

d)

Sound resistance

20.

What is one advantage of using rainwater harvesting systems?

a)

Increases the use of wholesome water

b)

Requires extensive treatment before use

c)

Reduces water bills

d)

Complicated compared to grey water reuse

21.

What is a disadvantage of rainwater harvesting systems?

a)

Unlimited water supply

b)

High initial installation costs

c)

Requires no water meter

d)

Unlimited collection area

22.

What is grey water?

a)

Water from kitchen sinks

b)

Water from baths, showers, and washing machines

c)

Water from rain

d)

Water from rivers

23.

Why is grey water from kitchen sinks not often used?

a)

It is too clean

b)

It contains fats, oils, greases, and food particles

c)

It is too cold

d)

It is too expensive to collect

24.

What is the classification of grey water under the Water Regulations?

a)

Category 1

b)

Category 3

c)

Category 5

d)

Category 7

25.

What is grey water not suitable for?

a)

Drinking water

b)

Garden washing

c)

Toilet flushing

d)

Car washing

26.

Which system involves collecting grey water from appliances and reusing it without treatment?

a)

Direct reuse system

b)

Short retention system

c)

Long retention system

d)

Filtration system

27.

What is a common feature of grey water reuse systems?

a)

Storage tank for treated water

b)

Direct discharge to sewer

c)

Use for drinking water

d)

No treatment required

28.

How much water can a short retention system storage tank typically hold?

a)

100 litres

b)

200 litres

c)

50 litres

d)

150 litres

29.

What is the primary function of a physical and chemical grey water system?

a)

To remove physical debris and add chemical disinfectants

b)

To decompose organic matter using bio-cultures

c)

To introduce oxygen into the waste water

d)

To use reed beds for natural filtration

30.

Which system is described as the most advanced for treating grey water?

a)

Physical and chemical system

b)

Biomechanical system

c)

Biological system

d)

Reed bed system

31.

What is a key disadvantage of using reed beds in grey water systems?

a)

High cost of installation

b)

Complex maintenance requirements

c)

Large land area required

d)

Inability to remove physical debris

32.

What should be considered when installing a grey water reuse system?

a)

Proximity to a water source

b)

Availability of space to store grey water

c)

Type of soil in the area

d)

Presence of wildlife

33.

Is planning permission generally required for a grey water reuse system?

a)

Yes, always required

b)

No, not required

c)

Only if the system is above ground or in a designated area

d)

Only if the system is below ground

34.

What is the main concern of the Water Supply (Water Fittings) Regulations 1999 regarding grey water reuse systems?

a)

Avoidance of cross contamination between grey water and wholesome water

b)

Ensuring water is suitable for drinking

c)

Reducing water charges

d)

Improving water taste

35.

What classification is given to grey water according to the regulations?

a)

Category 1

b)

Category 3

c)

Category 5

d)

Category 7

36.

Which building regulation is concerned with the installation of supply and control wiring for grey water systems?

a)

A

b)

B

c)

H

d)

P

37.

According to the industry tip, what now monitors the use of water?

a)

Rateable value of the property

b)

Water meter

c)

Water quality sensor

d)

Water pressure gauge