Second Step of Problem Solving Process

3rd Step in the Problem Solving Process

Fourth Step in the Problem Solving Process

5th Step in the Problem Solving Process

Sixth Step in the Problem Solving Process

The 2D sketch plane option/ selection can be found where in Inventor (multiple)

2D sketch/ drawing cannot occur without which of the following?

After a Sketch Plane has been selected, what is the first step in the inventor drawing/ design process?

What is the second step in the inventor drawing/ design sketch process?

Which of the following prevents unwanted changes to a feature when sizes are changed or referenced geometry is moved?

Which of the following helps define the exact size of a sketch geometry?

Work or Sketch planes are------surfaces

Which of the following creates a 3D solid by having a 2d profile and a 3rd dimension in a straight and single direction

In order to create a rectangular slot all the way from front to back of a part you will need to select the following options in the extrude command?

In order to create a  2" deep part/object that comes 1" towards the front and 1" towards the back of the XY plane, select which of the following?

What must be selected to revolve, loft or extrude a 2D sketch to a 3D solid?

Can you extrude more than 1 sketch at one time?*

Typically dimensions should NOT be place where?*

How should dimensions be placed as you work your way away from the object?

For best clarity, dimensions should be placed on what view of the object.

Which of the following lines should not be crossed, if at all possible, because the line could cross the actual value listed?

Can hidden lines be dimensioned?*

Typically what view will have the most dimensions on it?*

Which of the following creates a 3D solid by having a 2D sketch around an axis to create a 3D Model

What is the range that a 2D profile can become 3D while going around a line?

What must be selected to revolve, loft or extrude a 2D sketch to a 3D solid?

The sketch that will be "spun" around to create the 3D solid will be ____ of a "view."

In order to create a hole all the way through the circular part/object you will need to be ____ in relation to the rotation line.

If you need a torus/donut shaped hole through an 3D part/object, you must select what option in the command when you take it to 3D?

What is the minimum number of multi-view/orthographic views, depending on the object complexity, an object (not sheet metal) needs to have in order to accurately describe it?

What is the total number of multi-view/orthographic “principle” views an object can have, if drafted them all.

What is the most common number of "principle" views used/drawn

What is the most common view, and usually the first, view drawn?

The TOP view shows what two object sizes?

The FRONT view shows what two object sizes?

What overall size/dimension does the TOP and SIDE views share?

On what type of Inventor file would engineers use a parts list?

What must be created on the objects you created to help with the identification of the parts in the Parts List?

Which of the following is a need, for the parts list, on an engineering file?  Check all that apply.

Within which tab is the Parts List Command located?*

What can be done to open the Parts list Edit dialog box?  Select all that apply.

After opening the Parts List dialog box, what is selected to allow the designer to add or remove columns in the parts list.

Which of these categories is the least needed on a parts list