Font size
WorksheetsВъпроси за компютърни архитектури
Total questions: 141
Worksheet time: 2hrs 38mins
Каква е ролята на вертикалната организация на паметта?
Подобрява надеждността на паметта
Увеличава броя на достъпите на единица време (т.е. повече байтове се обменят на единица време)
Намалява времето за достъп до паметта
Увеличава времето за достъп до паметта
Каква е ролята на хоризонталната организация на паметта?
Подобрява надеждността на паметта
Увеличава броя на достъпите на единица време (т.е. повече байтове се обменят на единица време)
Намалява времето за достъп до паметта
Увеличава времето за достъп до паметта
Какво гласи законът на Амдал?
Последователната част на задачата ограничава производителността отдолу
Последователната част на задачата ограничава производителността отгоре
Паралелната част на задачата ограничава производителността отдолу
Паралелната част на задачата ограничава производителността отгоре
Кои подходи се прилагат за намаляване на вредното въздействие на преходите върху производителността на тръбопроводите?
Изпълнение на инструкции извън ред, преименуване на регистри
Предсказване на клонове, спекулативно изпълнение, забавено клонене
Суперскаларно, извънредно изпълнение на инструкции, спекулативно изпълнение
Суперскаларно, преименуване на регистри, предсказване на клонове
В кои регистри извикващата функция предава първите 6 цели аргумента на извиканата функция в 'SPARC'?
$o0 - %o5
%l0 - %05
%i0 - %i5
%g0 - %g5
Колко директно достъпни цели регистри има в 'SPARC' в потребителски режим?
16
32
Какви са първите 6 цели аргумента, предадени на 'SPARC'?
$o0 - %o5
%l0 - %05
%i0 - %i5
%g0 - %g5
Колко директно достъпни цели регистри има в 'SPARC'?
16
32 в регистров прозорец
32
8
Какъв недостатък имат процесорите с много дълги инструкции и синхронизация на софтуерно ниво?
По-ниска производителност
По-ниска ефективност
По-сложно управление
Няма бинарна съвместимост между различни серии
Какви уникални характеристики има 'MIPS'?
Инструкции за проверка дали един операнд е по-малък от друг, чрез които се правят всички сравнения
8 полета на флагове и инструкции за операции между тях; пренос и преливане в отделен регистър
Инструкции за обработка на низове с префикс за повторение, имплицитно адресиране на инструкциите и префикс
Всяка инструкция може да бъде изпълнена само ако е изпълнено условие; десният операнд е подвижен
Кой основен протокол най-често се прилага за съгласуваност на данните в супероперативната (кеш) памет?
SIME
MESI
SEMI
MISE
Как е кодирано отместването в относителното адресиране на клон в 'ARM', 'POWER[PC]', 'SPARC', 'MIPS'?
Като подписано число, една четвърт от разликата между адреса на клона и този в програмния брояч
Като подписано число, равно на разликата между адреса на клона и този в указателя за инструкции
Като подписано число, половината от разликата между адреса на клона и програмния брояч
Няма, тъй като за клонове се използва абсолютна, а не относителна адресация
Какви ограничения има при работа с флага за пренос в 'POWER[PC]' и 'SPARC'?
Сместа не работи с него
Същият флаг играе роля
Какви ограничения съществуват при работа с флага за пренос в 'POWER[PC]' и 'SPARC'?
Дислокацията не работи с него
Същият флаг служи както за флаг за пренос, така и за флаг за преливане
Той е хард-кодиран, кои команди го обновяват
Не е програмно достъпен
Кои от изброените етапи НЕ са част от алгоритъма на машината за събиране/изваждане на плаваща запетая?
Подравняване на редовете
Подравняване на мантисите
Изваждане на редовете
Сравнение на редовете
Нормализация на резултата
Кои от изброените операции са операции с логически данни?
Логическо умножение
Логическа неравенство
Логическо деление
Логическа отрицание
Всички горепосочени
Регистровата памет:
Е реализирана независимо и се намира близо до процесора
Е реализирана независимо и има относително голям обем
Регистри, свързани със структурата и обслужването на АЛУ, обикновено имат размери на битовата мрежа
Е реализирана на кристалната основа на процесора
Търсенето на данни в кеш паметта е:
Ассоциативно
Маскируемо
Последователно
Базово с офсет
Индексирано
В команда за извикване на подпрограма:
Състоянието на процесора автоматично се запазва в стека
Адресът за връщане от подпрограмата се запазва в стека
Офсетът между адресите на основната програма и подпрограмата се запомня в стека
Програмистът е отговорен за запазването на състоянието на процесора
Кои от посочените твърдения са верни за директния метод?
Кои от следните твърдения са верни за метода на директно адресиране на операнди?
При всяко стартиране на програмата, директно адресираните операнди се намират на различни места в паметта
Командите с директно адресиране на операнди са с най-кратка дължина
Директно адресираните операнди са немобилни - те винаги се намират на същия адрес в паметта
Командите с директно адресиране са сред най-бързо изпълняващите се
Състоянието на процесора по време на прекъсване се представя от съдържанието само на тези възли, загубата на които е фатална за възобновяване на прекъснатия изчислителен процес от точката, в която е бил уловен от външното събитие. Тази най-необходима информация обикновено се нарича:
Слово за състояние
Файл за състояние
Вектор за състояние
Регистър за състояние
Съвременните системни шини могат да бъдат разделени на три функционални групи:
Адрес, вход-изход, контрол
Адрес, регистър, данни
Адрес, вход-изход, насочване
Адрес, данни, контрол
Каква корекция на резултата се прави при събиране на числа, представени в двоично-десетичен код с директна подмяна (8-4-2-1), ако е настъпила пренос?
0
+3
+6
-6
Каква корекция на резултата се прави при събиране на числа, представени в двоично-десетичен код с директна подмяна (8-4-2-1), ако не е настъпило пренасяне?
0
+3
+6
-6
Най-голямото представимо число в цифрова мрежа с ляво фиксирана запетая е:
Какви са числата, представени в двоично-десетичен код с директна подмяна (8-4-2-1), ако няма пренос между цифрите?
0
+3
+6
-6
Какво е най-голямото представимо число в цифрова мрежа с ляво фиксирана запетая?
a=1
a= +1-q-n-1
a=0.5
a=q-n
Колко пъти е по-висока производителността на компютър с N процесора в сравнение с един процесор?
Производителността нараства пропорционално на броя на процесорите
Производителността нараства пропорционално на квадратния корен на броя на процесорите
Толкова пъти, колкото времето за изпълнение на задачата е по-малко от това на един процесор
Увеличаването на броя на процесорите не увеличава реалната производителност само по себе си
Какви нива на паралелизъм съществуват?
Ниво на програма и ниво на команда
Ниво на задача, ниво на програма и ниво на команда
Ниво на задача, ниво на програма, ниво на команда и ниво на машинна дума
Ниво на задача, ниво на програма, ниво на команда, ниво на машинна дума и отделно ниво на бит
Каква връзка между подфункциите на командите трябва да съществува, за да бъде възможна обработката в конвейер?
Не е необходимо подфункциите да бъдат свързани по никакъв начин
Изходните данни на всяка подфункция трябва да бъдат входни данни на следващата и не трябва да има други връзки
Всички подфункции трябва да имат общи входни и изходни данни и не трябва да има последователни връзки между тях
Обработката в конвейер винаги е възможна, независимо от връзките между подфункциите
В кои регистри се предават първите 8 цели аргументи в 'POWER[PC]'?
r7 - r14
r5 - r12
r3 - r10
r1 - r8
Какви флагове за знаците (състояние) на резултата са налични в carry 'POWER[PC]'?
Какви са първите 8 цели аргумента, предадени в 'POWER[PC]'?
r7 - r14
r5 - r12
r3 - r10
r1 - r8
Какви флагове за знаците на резултата (състояние) съществуват в 'POWER[PC]'?
OF (пренос), ZF (нула), SF (знак), AF (допълнителен пренос), PF (паритет), CF (пренос)
LT (отрицателен резултат), GT (положителен резултат), EQ (нула), SO/OV (пренос), CA (пренос)
N (отрицателен резултат), Z (нула), V (пренос), C (пренос)
Няма такива програмно достъпни флагове
Какви видове матрични процесори съществуват?
Скалярни процесори и SIMD процесори
Векторни процесори и SIMD процесори
Векторни процесори и MISD процесори
Скалярни процесори и MISD процесори
Какви уникални характеристики има 'IA-32'?
Команди за проверка дали един операнд е по-малък от друг, чрез които се правят всички сравнения
Регистров прозорец с 8 позиции, команди за преместване в двете посоки без използване на стека
8 флагови полета и команди за операции между тях; пренос и общо преливане в отделен регистър
Команди за обработка на низове с префикс за повторение, имплицитно адресиране на командата и префикса
На какви адреси се извършва достъпът до супероперативната (кеш) памет?
Безадресно (директно)
Понякога на същите адреси, на които се намират данните в основната памет, понякога на други
На различни адреси от тези, на които се намират данните в основната памет
На същите адреси, на които се намират данните в основната памет
Какво се проверява, за да се види дали условието за преход в 'POWER[PC]' е изпълнено?
Какво се проверява, за да се види дали условието за преход в 'POWER[PC]' е изпълнено?
Флагове за нула, пренос, знак и преливане след команда за сравнение или проверка на бит
Равенство (неравенство) на регистри или сравнение с 0 след командата ' < ' за сравнение на регистри
Флагове за по-голямо, по-малко и равно на нула след команда за подписано или логическо сравнение
Дали един регистър е по-малък, по-голям или равен, равен или неравен на друг с една команда
Какви характеристики имат 32-битови цели аритметични операции в 'RISC-V'?
Има отделни регистри за долната и горната част на произведението и делимото
Има различни команди за горната и долната част на произведението и команда за остатъка
Има отделен регистър за горната част на произведението и делимото
Десният операнд преминава през блок за изместване, има акумулиращо умножение, но няма команда за остатъка
Алгоритъмът за деление на числа с плаваща запетая включва следните етапи.
Проверка на стойностите на мантисите
Действително деление на порядките
Действително деление на мантисите
Нормализация на резултата
Нормализация на порядките
Наборът от символи, които цифровите машини обработват, е разделен на два подмножества. Какви са те?
Графични и контролни символи
Логически и числови символи
Графични и числови символи
Логически и графични символи
Какъв тип памет е на най-високото ниво в йерархията на паметта на компютърната система?
Кеш
Външна
Регистър
Основна
ЕПРО
Кой тип памет е на най-високото ниво в йерархията на паметта на компютърната система?
Кеш
Външна
Регистър
Основна
EPROM е:
Памет за четене и запис
Неволатилна
Динамична памет
Магнитно съхранение
Когато се извиква подпрограма:
Отклонението между адресите на основната програма и подпрограмата се запазва в стека
Има проблем с формирането на адреса за връщане в основната памет
Има проблем с предаването на параметри към/от подпрограмата
Подпрограмата завършва с команда за скок
Подпрограмата завършва с команда, която съдържа адреса за връщане в основната памет
За индексирания метод на адресиране на операнди, вярно е, че:
Елементите в масива се адресират с еднакъв офсет от адреса на първия елемент
Достъпът до елементите на масива се извършва чрез промяна на индексния номер относително на адреса на първия елемент на масива
Той е предназначен за адресиране на хомогенни данни (масиви), които се намират в последователни паметни клетки
Изчисляването на ефективния адрес на операнда се извършва с хардуерни средства
Прекъсвания, чийто сервизиране може да бъде забавено, се наричат:
Маскируеми
Немаскируеми
Условни
Системни
Относителни
Микропроцесорът изпълнява програми, написани на:
Машинен език
Ассемблерен език
Всеки алгоритмичен език
In a bit network with a right-fixed comma, the following are represented:
Real numbers
Only fractional numbers
Numbers with shifted order
Only whole numbers
What is the result of executing HOKOKOKOK?
HPK
HOK
HDK
N
What is the result of executing ХОКОКОКОК?
HPK
HOK
HDK
Cannot execute such an operation
Which memory has the least access time?
RAM
ROM
Processor's register memory
Superscalar (cache) memory
How are technological and architectural improvements applied?
Simultaneously, complementing each other
A compromise is made between the two approaches
The two approaches compete with each other
Alternately (either one or the other)
What triggers the 'bubbles' when working on the conveyor?
Temporary halting of its operation to fill in when an incorrectly predicted transition command occurs
Temporary halting of its operation to fill in when a correctly predicted transition command occurs
Temporary halting of its operation to correct an error in the calculations of some ALU
Non-sequential execution of commands in it
What features do the addressing methods in memory have in 'POWER[PC]' and 'SPARC'?
Indirect register addressing with constant displacement (signed)
Indirect register addressing with constant displacement (signed) or index in register
Three-component addressing (base, scaled index, and displacement), of which up to 2 can be absent
Base and scalable displacement; pre- and post-indexed, auto-incrementing and auto-decrementing addressing
What flags for the signs (state) of the result are present in 'IA-32'?
OF (overflow), ZF (zero), SF (sign), AF (auxiliary carry), PF (parity), CF (carry)
LT (negative result), G
What flags for the status of the result are available in 'IA-32'?
OF (overflow), ZF (zero), SF (sign), AF (auxiliary carry), PF (parity), CF (carry)
LT (less than), GT (greater than), EQ (equal), SO/OV (overflow), CA (carry)
N (negative), Z (zero), V (overflow), C (carry)
No such programmatically accessible flags
What is characteristic of processors with very long instruction words and software-level synchronization?
Never leaves any unused computational unit
Some computational units remain permanently unused
Most commands leave unused computational units
All commands leave unused computational units
What unique features does 'SPARC' have?
Each command can only be executed if a condition is met; the right operand is relocatable
String processing commands with a repeat prefix, implicit addressing of the command and prefix
Register window with 8 positions, commands for shifting it in both directions without using a stack
Commands to check if one operand is less than another, through which all comparisons are made
How is data searching performed in the superoperational (cache) memory?
By indexing
Randomly
Associatively
Sequentially
What addressing does the conditional jump use in 'IA-32', 'ARM', 'POWER[PC]', 'SPARC', 'MIPS', 'RISC-V'?
Direct
Relative
Indirect
Absolute
What limitations are there when working with the carry flag in 'IA-32'?
Shifting does not work with it
The same flag serves as both a carry flag and a flag for overflow
What are the limitations of working with the carry flag in 'IA-32'?
Shifting does not work with it
The same flag plays the role of both carry and overflow flag, and zero flag
Which commands update it is firmly established
It is not programmatically accessible
The main algorithmic structures are:
With feedback
Cyclic
Sequential
Linear
Branching
Which of the following are used to represent character data?
DOUBLE PRECISION
ASCII
UNICODE
SINGLE PRECISION
KOI-7
By what mechanism are the operations of exchange between the processor and primary memory serviced in the presence of buffer memory?
LIFO access
FIFO access
Random access
Associative access
The associative memory must contain:
Register of the associative feature
Shifting register
Program counter
Match register
The commands for controlling the transition:
Do not contain operand
Use only ALU during execution
Contain two operands
Contain one operand
Can trigger execution of the next sequential command
Commands with implied operand address(es)
These commands are very fast
These commands get the addresses of the operands from previous commands
These commands are used specifically for accessing registers from the I/O address space
These are commands that address (find) their operands in the processor's register memory (e.g., in the stack)
Indicate the correct statements
Which statements are correct?
Both internal and external interrupt requests go to the same input of the processor
Internal interrupt requests go directly to the processor's central control unit
Each external interrupt goes to a separate input of the processor
External interrupt requests go to two different inputs - one for non-maskable interrupts and one for maskable interrupts
Each digital computing machine represents a set of the following devices:
Motherboard, RAM, external memory
Microprocessor, memory, peripheral devices
Operational (ALU), memory (OP), control (UU)
The length of the bit network is determined by:
The number of bits
The number of bytes
The number of digits
The length of the field for the significand
The natural form of numbers includes:
Sign of the number, integer part, separator, fractional part
Sign of the number, mantissa, sign of the order, order
Sign of the number, significand, right fixed comma
Sign of the number, left fixed comma, significand
What is a cluster?
Memories in a parallel computer
Processors united in SMP architecture
Computers united in a network to solve a common task
Disks in a parallel computer
What commands for working with bit fields are there in 'ARM' and 'MIPS'?
Extracting and inserting a bit field
Extracting and inserting a bit field after rotation
Extracting with compression or distributing by bits of a bit field by a given mask
There are no such commands
Which method for replacing information is used?
What method for replacing information is used in the superoperational (cache) memory?
MRU
LIFO
LRU
FIFO
What is checked to see if the condition for transition in 'RISC-V' is met?
Whether one register is less than, greater than, or equal, equal or not equal to another with just one command
The flags for zero, carry, sign, and overflow after a comparison or bit check command
The flags for greater than, less than, and equal to zero after a signed or logical comparison command
Equality (inequality) of registers or comparison with 0 after the comparison command '<' on registers
What features do 32-bit integer arithmetic operations in 'MIPS' have?
There is a separate register for the high word of the product and the dividend
There are separate registers for the low and high word of the product and the dividend
There are different commands for the high and low word of the product, there are no commands for the remainder
There are different commands for the high and low word of the product and commands for the remainder
Which of the listed properties should algorithms possess?
Repeatability
Massiveness
Discreteness
Resultness
Cyclicality
What data can digital machines process?
Symbolic
Logical
Numerical
Personal
Which of the statements is incorrect?
The buffer memory is an intermediate link and its operation does not depend on the user
The buffer memory is built from cheap memory schemes, most often dynamic
The buffer memory is also called cache memory
The buffer memory
What is the function of buffer memory?
It is an intermediate link and its operation does not depend on the user.
It is built from cheap memory schemes, most often dynamic.
It is also called cache memory.
It coordinates different access speeds at different memory levels.
What types of memory devices are stack memory devices?
Memory with register access
Memory with group access
Memory with random access
Memory with sequential access
Memory with associative access
What is true about relative addressing of commands?
Only addition and subtraction actions are used between operands.
The address of the operand is calculated relative to the address of the current program.
The address of the transition is calculated relative to the address of the current program.
Negative numbers can be used, represented in reverse code.
What is true about the index method for addressing operands?
The technical implementation of index addressing of operands is performed using index registers.
Index registers are part of the processor's register memory.
Index registers are not part of the processor's register memory.
Index registers are not programmatically accessible.
What are interruptions that are served unconditionally called?
Unconditional interruptions
Non-maskable interruptions
Privileged interruptions
Base interruptions
At which level of the hierarchy of the computing process is the connection between programming and hardware resources established?
Micro-operation level
Machine command level
Programming languages level
Conceptual level
Which binary decimal code has the property of complementarity?
Excess-7 code
Excess-5 code
Excess-3 code
Excess-8 code
Which binary decimal code has the property of complementarity?
Excess-7 code
Excess-5 code
Excess-3 code
Excess-8 code
Which code has a double representation of the number 0?
Correct code
Inverse code
Additional code
What types of multiple access processing are there in horizontal memory organization?
Centralized and decentralized
Synchronous and asynchronous
Packet and pipeline
Horizontal and vertical
What typical advantage of RISC processors over CISC processors can you point out?
Higher performance
Simpler design
Higher efficiency
Higher code density
What is characteristic of the P6 architecture?
Externally CISC, internally RISC
Externally RISC, internally CISC
Both externally and internally RISC
Both externally and internally CISC
In which registers are the first 3 arguments of functions passed according to the 'regparm(3)' convention in 'IA-32'?
EBP, ESP, EIP
EAX, EDX, ECX
EBX, ESI, EDI
All arguments are passed via the stack, not in registers
How many directly accessible integer registers are there in 'ARM' in user mode?
8
16
32
32 in register window
When does synchronization occur between the functional units of processors with a very long word?
By the programmer, during the development of the program algorithm
During execution, by the processor
By the programmer, while writing the program in a high-level language
During compilation
What unique features does 'ARM' have?
What unique features does 'ARM' have?
String processing commands with repetition prefix, implicit addressing of the command and prefix
Each command can only be executed if a condition is met; the right operand is shiftable
8 field flags and commands for operations between them; carry and overflow in a separate register
Register window with 8 positions, commands for shifting it in both directions without using a stack
Which type of superoperational (cache) memories are most common?
With partial (n-way) associativity
With indirect (indirect) mapping
With direct (direct) mapping
With full associativity
What is checked to see if the transition condition is met in 'IA-32', 'ARM' and 'SPARC'?
Whether one register is less than, greater than or equal, equal or not equal to another with just one command
The flags for zero, carry, sign, and overflow after a comparison or bit check command
The flags for greater than, less than and equal to zero after a signed or logical comparison command
Equality (inequality) of registers or comparison with 0 after the comparison command '<' on registers
What features do 32-bit integer arithmetic operations have in 'ARM'?
The right operand goes through a shifting block, has accumulating multiplication, but no remainder command
There are separate registers for the lower and upper word of the product and the divisor
Almost all have only 2 explicit operands (and some even only 1) and can work directly with memory
There are different commands for the upper and lower
What property is NOT mandatory for algorithms?
Result
Repeatability
Discreteness
Massiveness
Cyclicality
The recovery of a primary element from code representation is achieved in:
Multiplexer
Demultiplexer
Encoder
Decoder
The main memory in a computer system:
Is built from expensive and fast memory schemes
Is built from relatively cheaper memory schemes compared to register memory
Is most often built from dynamic memory schemes (DRAM)
Is most often built from static memory schemes (SRAM)
The duration of the cycle for addressing is
The minimum time to follow several access cycles
The time to perform reading or writing
The time during which data remains in memory
None of the above
The machine instruction has the following structure:
Mnemonic code of the operation, operand, register
Operation code, operand address, next operation address
Mnemonic code of the operation, effective address of the operand
Operation code, address part
Which of the following statements are true for the direct addressing method of operands?
The length of the directly addressed operand is irrelevant - its starting address is unique
Directly addressed operands are located in the internal registers of the processor
The length of the directly addressed operand depends on the size of the general-purpose registers
What is the initial address of direct addressing?
What is stored during an interrupt?
Which statements are true?
The computational process is continuous - it proceeds continuously over time.
The computational process is executed in the arithmetic-logic unit of the processor and has nothing to do with switching individual logic elements.
The computational process is a process of sequential switching of logic elements.
The computational process is discrete - it proceeds in separate clock cycles.
When is a correction made to the result when adding numbers in binary-decimal code with direct substitution (8-4-2-1)?
When a forbidden combination occurs
When overflow occurs
When inter-digit carry occurs
Always
In a floating-point network, can both whole and fractional numbers be represented?
Both whole and fractional numbers can be represented
Whole numbers cannot be represented
Fractional numbers cannot be represented
Which methods for determining the actual performance of the computer provide the most accurate results?
Methods of measurement programs and synthetic programs
Methods of elementary times and command mixtures
What gives the most accurate results on the actual performance of the computer?
Methods of measurement programs and synthetic programs
Methods of elementary times and command mixtures
Methods of analytical modeling
Methods of simulation modeling
What is computer architecture (CA)?
Science of designing a microprocessor or single-chip computer on a silicon crystal
Practice of assembling (in a factory or at home) a computer from separate blocks, nodes, and subnodes
The word 'architecture' (ἀρχιτέκτων) means 'first builder', therefore CA is the construction of computers
Structural organization of the computer as a set of functional modules and connections between them
What do the abbreviations RAW, WAR, and WAW mean?
Methods of replacement in the superoperational (cache) memory
Assembler language commands
Inter-command dependencies
Types of computer architectures
In which registers are the first 8 integer arguments passed in 'RISC-V'?
x0 - x7
x5 - x12
x15 - x22
x10 - x17
What is the programming model of the microprocessor?
The set of programming tools
The set of hardware-accessible programming tools
The set of program-accessible hardware tools
Synonym for block diagram
What does NUMA architecture represent?
Nodes with distributed memory forming a parallel computer with shared memory
Nodes with distributed memory forming a parallel computer with distributed memory
Nodes with shared memory for the processors from the node, forming a parallel computer with shared memory
Nodes with shared memory for the processors from the node, forming a parallel computer with distributed memory
What unique features does it have?
What unique features does 'POWER[PC]' have?
Register window with 8 positions, commands for shifting it in both directions without using a stack
8 fields of flags and commands for operations between them; carry and overflow in a separate register
Each command can only be executed if a condition is met; the right operand is shiftable
Commands to check if one operand is less than another, through which all comparisons are made
What write methods are used in the superoperational (cache) memory?
write-forth, write-back
write-through, write-back
write-through, write-forth
It is used only for reading
Where is the return address stored when transitioning to a subroutine in 'IA-32'?
In stack memory
In a register
In an absolute address in memory
Nowhere
What features do 32-bit integer arithmetic operations have in 'IA-32'?
Almost all have only 2 explicit operands (and some even only 1) and can work directly with memory
There is a separate register for the high word of the product and the divisor
There are different commands for the high and low words of the product, there are no commands for the remainder
The right operand goes through a shifting block, there is accumulating multiplication, but there is no command for the remainder
Every algorithm can be implemented:
Hardware, through specialized technical means
Programmatically, on universal computing means
Hardware-software
In any of the listed ways
Where is the code of a given primitive formed?
Where is the code of a given primary element (for example, a letter) formed?
In a multiplexer
In a demultiplexer
In a encoder
In a decoder
The volume of the main memory:
Can be increased by expanding the processor's address space onto external storage devices
Cannot exceed the capabilities of the processor's address space
Is the sum of the volume of RAM and buffer memory
The following actions are possible with memory:
Addition and subtraction
Division
Writing
Reading
Multiplication and division
In forced addressing:
Commands from the main program are arranged in memory first, followed by commands from subprograms
Commands are arranged in memory in the order of their execution
Commands are not sequentially arranged in memory
It is not mandatory for commands to be arranged in memory in the order of their execution
What does 'execution address' of an operand mean? Indicate the correct statements.
This is the address of the memory cell where the operation that needs to be executed is recorded.
Execution address is the binary combination that is loaded into the address register of the RAM.
This is the address of the memory cell containing a reference to the address of the operand.
This is the real (actual, absolute) address of the memory cell where the operand is located (or from which it starts).
External interrupts can be:
Exclusive
Forced
Which of the following is a characteristic of the bit network?
Size
Length
Sequence
Equality
The discretization of the bit network for representing binary numbers with a left-fixed comma is:
d=0.5
d=2-n-1
d=0.1
d=1
d=2n
The discretization of the bit network for representing binary numbers with a right-fixed comma is:
d=0.5
d=2-n-1
d=0.1
d=1
d=2n
What are the features of modern computer architecture?
Widespread use of CISC and parallel processing at various levels
Widespread use of CISC and sequential processing at various levels
Widespread use of RISC and parallel processing at various levels
Widespread use of RISC and sequential processing at various levels
What limits the length of the pipeline?
Increasing the length of the pipeline reduces the efficiency of the processor
Increasing the length of the pipeline increases the access time of the processor to memory
