Commonly used in sticking two or more pieces of wood together.

Carpentry materials that are made by mild steel, brass, and copper. They are commonly used in fixing two or more wooden pieces together.

A type of screw that is best in fittings door handle plates decorative features.

A heavy duty screw having a square head and a coarse pitched thread, it is used in connecting metal to timber and in joining heavy timber.

Screw that can look decorative especially when made of brass. This screw is used in fixing pieces of materials together when countersunk screw cannot be used.

Used for general woodworking projects like fitting hinges to doors. It is a type of screw that can be tightened ‘flush’ to the surface of the materials.

Use to cut a round hole into a workpiece.

Tools used in cut on wood to produce flat surface. .

This tool has a jaw that is fixed at the side of the table and another jaw that can be moved through screw and its handle.

This tool can serve larger works, made from steel bar of T – section with malleable iron fitting and a steel bar of T- section with malleable iron fitting and steel screw. It is commonly used in holding frames or tops.

This holding tool can only be used with small works.

This tool has a cutting blade with a cutting edge of slight curvature for quick removal of material on rough work, used in oblique planning.

This tool Is used in making rebates.

Wooden piece of works are cut through the use of this toothed tool.

A type of saw with teeth that are firmly set.  The kerfs of this saw is wider than the blade which allows it to move freely during the cutting process without the tendency to stick into the wood or material being cut.

This is used in cutting the stock either along or across the grains. It is only used for small and thin cuts since its blade is very thin.

This is used in heavy works since it has a narrow, longer, and stronger tapering blade..

Cuts along the grains. This type of cutting saw has its edge that can make steeper angle at about 60 degrees.

A stronger chisel and general purpose chisel that can be operated using hand or with mallet. It has a flat blade.

This tool has a beveled back that is used in sharpening corner for finishing joints.

This tool has a cross section that is proportioned thus it can withstand heavy blows.

A tool used in driving the screw through or out of the wood.

A tool for finishing wood surfaces, removing sharp edges, and finishing fillets and interior surfaces.

A hand operated tool that is used in boring small holes

A small, lightweight and convenient tool that is used to create a relatively large-size holes.

A common tool used in making holes in the wood.

The cutting edge of this tool can be compared to a twist drill. It is used in creating holes with large diameter.

A carpentry tool that is used as a hammer in driving a chisel.

This tool is made up of two forged steel arms with a jaw that has a beveled inner face and plain outer face.

This tool is usually made of cast iron. Its flat face is used in driving nails and striking purposes.

Consist of standard nail head with a diamond-shaped emblem engraved into it.

One of the most versatile types of nail used in wood work. It comes in varying sizes and is used for general purposes like framing, furniture, wood paneling, and planks.

Commonly seen on fences, thin timber, and softwoods. It can easily be hammered.

Short nail with barbed and large head that is flat. It is used in securing roof or shingles to roof – deck or roof boards.

A type of nail characterized by an inverted cone – shaped head. This nail is thin in size and can enter the wood easily. This is used in fine cabinet works especially in nailing thin materials.

Nail that is cut and manufactured from coil of wire. It is most commonly used nail in construction as well as in household projects. It serves as a fastener in securing hardwood floor and in other construction processes.

A short nail with sharp and pointed ends.

A wavy piece of sheet steel with sharp ends. It is used in joining two pieces of materials with a straight butt joint.

Among the most versatile building materials. Possesses higher ratio of strength to stiffness.

Trunk of the tree which is free from the branches

A log that has roughly square/rectangular cross-section

A timber piece with round or square cross section with diameter or side that ranges from 175mm to 300mm

A 275 x 50 x 150 mm sawn timber piece with 2.5 to 6.5 meter in height

A timber piece sawn with below 50 mm thickness and more than 125 mm wide

A timber piece sawn at below 175 mm wide and 30 to 50 mm thick.

Pieces of timber without definite or standard size.

A rectangular or square timber in varying sizes or any designed cross- section mainly used as borders and frames.

A rose brown timber which slowly turns into dark brown.

Considered as the most common type of timber that is used in various applications

Another common type of timber that is white in color. It is softly turns into yellow as it becomes hard.

A brown timber that can be easily shaped in various products. It is widely used in making doors, packing cases, toys, and others as the chief product.

Possesses too many knots. It can easily be painted and yields a close grained moderately hard and durable wood.

Reddish brown in color with strong durability when dry. It has oil which protects it from attacks of insects.

When soft is dark brown in color and reddish brown when hard. It has brown stripes with an oily smell. It is used for interior works.

A pale red timber that is close grained tough. It is widely used in making tool handles.

A light brown in color when soft; and dark brown when hard. It can easily be attacked by insects but is commonly used in making drawers and packing case doors.

Resists the attacks of ants, thus, it can be polished better compared to other types of wood. It is generally used in making musical instruments, furniture, cabinet, and decorative work.

Changes its color from white to yellow. It is white in color when being cut but turns into yellow once cut.

A whitish brown timber that is free from ants and insects. It is comparatively hard but with poor finish ability.