NEW
Font size
WorksheetsFAA Air Space
Total questions: 30
Worksheet time: 21mins
The most comprehensive information on a given airport is provided by
The Chart Supplement US
Notices to Airmen
Terminal Area Chart
(Figure 20, area 5) How would a remote PIC "Check NOTAMS" as noted in the CAUTION box regarding the unmarked balloon
utilizing the B4UFLY mobile application
contacting the FAA district office
obtaining a briefing via an online source such as 1800WXbrief.com
An FDC NOTAM will typically contain information
regarding public gatherings of large groups
regarding military operations
regarding available hard surface runways
What information is contained in the Notices to Airman Publication (NTAP)
Current NOTAM and FDC NOTAMs
All Current NOTAMS
Current FDC NOTAMs
Flight Data Center NOTAMs are issued by the National Flight Data Center and contain regulatory information, such as
temporary flight restrictions
markings and signs used at airport
standard communication procedures at uncontrolled airports
Time-critical information on airports and changes that affect the national airspace system are provided by
Notices to Airmen (NOTAMs)
The Chart Supplement US
Advisory Circulars
One of the purposes for issuing a temporary flight restriction (TFR) is to
announce Parachute Jump Areas
protect public figures
identify Airport Advisory Areas
Public figures are protected by
special use airspace
prohibited areas
temporary flight restrictions
The FAA publication that provides the aviation community with basic flight information and Air Traffic Control procedures for use in the National Airspace System of the United States is the
Aeronautical Inforamtion Manual
Chart Supplement US
Advisory Circular Checklist
(Figure 31) Within what airspace is Coeur D'Alene Pappy Boyington Fld located
Class B
Class E
Class D
(Figure 52) What special conditions do remote pilots need to be on the lookout for while operating near Lincoln Airport
Deer near the runway
Birds in the vicinity
Parachute operations
Checking the NOTAMs confirms the Blue Angels are scheduled to perform at the local airport. When can UAs operations resume relative to this NOTAM
Once the Blue Angels have landed
With ATC authorization
Immediately, so long as a 1 NM distance is maintained
(Figure 25, Area 4) The floor of Class B airspace overlying Hicks Airport (T67) north-northwest of Fort Worth Meacham Field is
at the surface
3,200 ft MSL
4,000 ft MSL
(Figure 25, Area 3) The floor of Class B airspace at Dallas Executive (RBD) is
at the surface
3,000 ft MSL
3,100 ft MSL
(Figure 23, Area 3) What is the floor of the Savannah Class C airspace at the shelf area (outer circle)
1,300 ft AGL
1,300 ft MSL
1,700 ft MSL
According to 14 CFR Part 107, the remote PIC of a small unmanned aircraft planning to operate within Class C airspace
is required to receive ATC authorization
is required to file a flight plan
must use a visual observer
According to 14 CFR Part 107, how may a Remote Pilot in Command operate an unmanned aircraft in Class C airspace
The Remote PIC must have prior authorization from the Air Traffic Control facility having jurisdiction over that airspace
The Remote PIC must contact the Air Traffic Control facility after launching the unmanned aircraft
The Remote PIC must monitor the Air Traffic Control frequency from launch to recovery
The lateral dimensions of Class D airspace are based on
the number of airports that lie within the Class D airspace
5 SM from the geographical center of the primary airport
the instrument procedures for which the controlled airspace is established
(Figure 74, Area 6) What airspace is Hayward Executive in
Class B
Class C
Class D
(Figure 26, Area 5) The airspace overlying and within 5 miles of Barnes County Airport is
Class D airspace from the surface to the floor of the overlying Class E airspace
Class E airspace from the surface to 1,200 ft MSL
Class G airspace from the surface up to but not including 700 ft AGL
(Figure 76) What ATC permissions are required to operate near Anderson Airport
ATC clearance requested
No ATC permission is required
Waiver must be requested
(Figure 78) IN what airspace is Onawa IA (K36) located?
Class E
Class G
Class D
(Figure 78, near the center of the chart) What class of airspace is associated with SIOUX GATEWAY/COL DAY (SUX) Airport
Class B Airspace
Class C Airspace
Class D Airspace
(Figure 20, Area 1) The Fentress NALF Airport (NFE) is in what type of airspace?
Class C
Class E
Class G
What minimum radio equipment is required for operation within Class C airspace
Two way radio communications equipment and a 4096 code transponder
Two way radio communications equipment, a 4096 code transponder, and DME
Two way radio communications equipment, a 4096 code transponder, and an encoding altimeter
What are the requirements for operating an sUAS in Class C airspace
Two way radio communications and transponder with altitude reporting capabilities
Two way radio communications and visual observer
ATC authorization and visual observer
The typical outer radius limits of Class C airspace are
10 NM
20 NM
30 NM
(Figure 25, Area 2) The airspace directly overlying Addison Airport (ADS) is
Class D up to 3,000 ft MSL
Class D up to but not including 3,000 ft MSL
Class E from the surface up to 3,000 ft MSL
(Figure 26, Area 1) The airspace overlying Tomlison Airport is
Class G up to 18,000
Class E from 1,200 up to but not including 18,000
Class E from 700 up to but not including 18,000.
(Figure 78) You have been hired to fly your UA to inspect train tracks from the town of Hinton to the town of Winnebago. Will you be able to conduct this flight without contacting ATC
Yes, because you will remain under 400 ft
No, because you will pass through Echo airspace
No, because you will pass through Delta airspace
