I understand and comply with the lifting plan

I will only perform lifts for which I am qualified and authorized

The drawing is merely a reference document to confirm the weight of the load

I confirm that the equipment has been inspected, is suitable for the purpose, and the load is stable

I confirm that the steel structure, personnel lift, platform, and ladder have been inspected and that there are barriers and protective fences in place

I check that a no-entry zone has been established

I maintain 100% tie-off to approved anchor points while outside of protective barriers

I can use a rope or lanyard as a lifeline to prevent falls from heights

I always wear a seatbelt

I check my car before I start driving

I follow driving rules and adapt to hazardous conditions

I can use my mobile phone for a short time to work during traffic jams

I comply with the obstacles or exceptions defined

I store objects such as tools, equipment, or materials

The danger from fire hazards occurs only in small areas

I position myself to avoid being struck, pulled in, or crushed

As long as I have approval from my supervisor, I am authorized to work

I have confirmed whether a license is required or not

I will inform affected workers about the risks and work plan before starting work

I am qualified and authorized to work

I confirm that there is a separation of power sources

I check that the air has been tested and inspected

I have a supervisor nearby and communication is clear

If hot work is to be done in a confined space, there must only be a permit for confined space

I am qualified and authorized to perform energy isolation

I have identified all energy sources

I follow LOTO procedures to isolate hazardous energy sources

We can proceed without notifying the customer when there is on-site care

I am qualified and authorized to work with live electrical systems

Single-person operations are permitted when personal protective equipment is provided

I conduct safety planning for all electrical work

I confirm that emergency response equipment is available and ready

I will remove or separate flammable and ignitable materials from the ignition source

I will use grounding methods and personal protective equipment

I will request a permit when working hot outside of approved areas

If a burning smell is detected, people must stop work, search for, and extinguish the fire