NEW
Font size
WorksheetsDrawing Instruments and Equipment
Total questions: 20
Worksheet time: 10mins
What is the purpose of a Mini Drafter?
To serve as a miniature version of a drafting machine for drawing various types of lines and angles.
To create 3D models for architectural designs.
To measure distances on a map accurately.
To provide a digital interface for drafting software.
What is the purpose of a Sand Paper Block?
To sharpen or maintain edges of pencil lead.
To smooth surfaces of wood or metal.
To clean and polish glass surfaces.
To create a rough texture on paper.
What is the designation of a scale used for a 1:100 scale ratio?
M4
M1
M2
M3
What is the purpose of a Sand Paper Block?
To sharpen or maintain edges of pencil lead.
To smooth surfaces of wood or metal.
To clean and polish glass surfaces.
To remove paint from walls.
What is the function of a Lengthening Bar?
To draw larger circles when fitted to a compass.
To measure the length of objects accurately.
To extend the reach of a ruler.
To create straight lines on paper.
What is a Drawing Board made of?
Strips of well-seasoned softwood, typically 25 mm thick, with a straight ebony edge and battens to prevent warping.
Plywood sheets with a glossy finish and reinforced corners.
Plastic composite material with a textured surface for better grip.
Metal sheets with a rubberized coating for durability.
What is the grade of pencils used for visible lines and outlines?
B
H
2B
4H
What is the primary function of a Ruling Pen?
To ink straight lines drawn with instruments.
To create decorative borders on paper.
To measure angles accurately.
To erase pencil marks from paper.
What is the standard size of a B0 drawing board?
800 x 600 mm
1000 x 750 mm
1200 x 900 mm
900 x 700 mm
What is the area of A1 drawing sheet?
0.5 square metre.
1 square metre.
0.75 square metre.
0.25 square metre.
What is the area of A1 drawing sheet?
0.5 square metre.
1 square metre.
0.75 square metre.
0.25 square metre.
What is the primary function of a Drafting Machine?
To combine T-square, set-squares, scales, and protractor for technical drawing.
To create 3D models for architectural designs.
To measure angles and distances in surveying.
To draft legal documents and contracts.
What is the function of a Lengthening Bar?
To draw larger circles when fitted to a compass.
To measure the length of objects accurately.
To extend the reach of a ruler.
To create straight lines on paper.
What is the area of an A3 drawing sheet?
1/4th of A0 sheet.
1/2nd of A0 sheet.
1/8th of A0 sheet.
1/16th of A0 sheet.
What is the function of a Beam Compass?
To accurately divide a line or circle into equal parts.
To measure the angle of elevation.
To draw straight lines only.
To create perfect circles without a center point.
What is the standard size of A0 drawing sheet?
841 x 1189 mm
594 x 841 mm
420 x 594 mm
297 x 420 mm
What is the primary function of a T-square?
To draw vertical lines.
To draw horizontal lines.
To measure angles.
To create curves.
What is the primary function of a Proportional Divider?
To ensure drawing accuracy to scale.
To measure angles accurately.
To create 3D models.
To assist in color mixing.
What is the purpose of a Mechanical Clutch Pencil?
For precise drawing and writing with a fine tip.
To erase pencil marks easily.
To create thick lines for bold writing.
To serve as a ruler for straight lines.
What is the purpose of an Erasing Shield?
To remove unnecessary lines without disturbing others.
To create a permanent mark on the paper.
To enhance the color of the ink used.
To protect the paper from tearing.
