NEW
Font size
WorksheetsPre-Test 4.1 in TLE 7 (4th Quarter)
Total questions: 50
Worksheet time: 1hrs 15mins
Which technical and manual skill is NOT included in the construction sector?
Carpentry
Masonry
Mechatronics Servicing
Tile Setting
Which of the following educational tracks does Industrial Arts strand belong to?
Academic
Arts and Design
Sports
Technical-Vocational Livelihood
Which law is known as the National Building Code of the Philippines?
Republic Act No. 6541
Republic Act No. 9163
Republic Act No. 8491
Republic Act No. 10121
Which of the following is NOT classified as a hand tool?
Hammer
Pneumatic drill
Screwdriver
Wrench
What is the primary function of a hammer?
Cutting wood
Driving nails
Holding materials
Measuring objects
Which of the following tools is used for cutting materials?
Chisel
Clamp
Measuring tape
Level hose
What type of tool is a caliper?
Cutting tool
Driving tool
Holding tool
Measuring tool
What is the primary function of a screwdriver?
Cutting metal
Driving or removing screws
Holding materials
Measuring distances
Which of the following is a power tool?
Clamps
Chisel
Electric drill
Handsaw
Which of the following is NOT an edge-cutting tool?
Chisel
Plane
Pliers
Spokeshave
What type of power tool is used for tightening or loosening bolts with high torque?
Air impact wrench
Measuring wheel
Plumb bob
Rubber mallet
Which tool is used to measure length and distances?
Caliper
Push-pull tape
Ruler
All of the other 3 choices
Which of the following is common use for a paint sprayer?
Cutting wood
Drilling holes
Painting large surfaces evenly
Measuring angles
Which tool is used to cut along the grain of wood?
Circular saw
Crosscut saw
Hand drill
Rip saw
What is a trowel used for in masonry?
Cutting and shaping metal
Drilling holes in concrete
Painting surfaces
Spreading and shaping mortar
What does a masonry saw primarily used for?
Drilling holes in walls
Shaping wooden surfaces
Welding metal components
Cutting bricks, blocks, or stones
Which of the following is NOT a masonry tool?
Float
Hawk tool
Paint scraper
Trowel
What tool is used for cutting metal rods, pipes, and sheets?
Chisel
Hacksaw
Metal shear
Welding machine
What is the primary function of a pipe wrench?
Cutting pipes
Gripping and turning pipes
Measuring pipe diameters
Sealing pipe joints
Which tool is used to securely hold pipes in place during cutting or threading?
Pipe Cutter
Pipe Threader
Pipe Vise
Pipe Wrench
What tool is used to cut ceramic, porcelain, or stone tiles?
Grout Float
Tile Cutter
Tile Trowel
Wire Stripper
Which tool is used to remove insulation from electrical wires?
Circuit Tester
Voltage Tester
Wire Crimper
Wire Stripper
Which government agency oversees the implementation of the National Building Code?
Department of Agriculture (DA)
Department of Education (DepEd)
Department of Health (DOH)
Department of Public Works and Highways (DPWH)
What is required before constructing any building in the Philippines?
Building permit
Business permit
Driver's license
Health certificate
Which of the following is NOT one of the sectors covered in the Industrial Arts strand?
Construction
Electrical and Electronic
Heating, Ventilation, Air Conditioning, and Refrigeration
Information Technology
Which of the following best describes the primary role of a painter in construction?
To build and maintain structures using wood
To construct buildings using stone and bricks
To design architectural blueprints for structures
To apply paint, coatings, and finishes to surfaces
What is the primary purpose of the National Building Code of the Philippines?
To monitor business permits
Managing agricultural practices
To regulate educational institutions
To ensure the safety and stability of structures
Which of the following is NOT covered by the National Building Code?
Electrical installations
Livestock management
Plumbing systems
Structural design
Under the National Building Code, who is responsible for ensuring the safety of a building's construction?
The janitor
The barangay captain
The property owner only
The architect and engineer
Which of the following is a violation of the National Building Code?
Following safety standards
Ensuring proper ventilation
Constructing without a permit
Consulting a licensed architect
Which is NOT a structural requirement under the National Building Code?
Aesthetic design
Fire-resistant materials
Proper foundation
Structural integrity during earthquakes
What is the primary purpose of the Philippine Electrical Code (PEC)?
To regulate electrical appliance prices
To provide aesthetic designs for electrical installations
To promote international electrical design standards only
To ensure the safety of electrical installations and prevent hazards
According to the Philippine Electrical Code, who is authorized to perform electrical installations?
Any homeowner
Students with basic electrical knowledge
Construction laborers without certification
Licensed electrical engineers and electricians
Under the Philippine Electrical Code, what should be done before performing maintenance on an electrical system?
Increase the voltage supply
Use tools with wet hands
Turn off the main power source
Pour water on electrical components
Which of the following is NOT a requirement under the Philippine Electrical Code?
Use of proper grounding systems
Regular inspection of electrical systems
Randomly connecting wires without labeling
Installation of protective devices like circuit breakers
What is the purpose of a pipe threader?
To clamp pipes securely
To remove rust from pipes
To cut pipes into smaller pieces
To create threads on pipe ends for connections
In a scenario where a person needs to ensure the air conditioning system in their home or office is working optimally, which professional should be contacted for routine maintenance and repairs?
Automotive mechanic
Automotive service technician
Electronic technician
Refrigerator and aircon technician
If a company requires both the installation of a new industrial cooling system and the repair of malfunctioning electronic equipment in their production facility, which two professionals would be most appropriate to hire for these tasks?
Automotive mechanic and Driver
Electronic technician and Automotive service technician
Electronic technician and Refrigerator and Aircon technician
Automotive mechanic and Refrigerator and Aircon technician
A new commercial building is being developed, and there is a need to install an electrical wiring system throughout the entire structure. Which professional should be hired to handle this aspect of the project?
Electrician
Plumber
Mechatronics Technician
Tile Setter
How does the role of a carpenter differ from that of a mason in construction projects?
Carpenters work with bricks and stones, while masons work with wood.
Carpenters are responsible for designing the structure, while masons construct it.
Masons apply finishes and coatings to surfaces, while carpenters focus on machinery.
Carpenters install and maintain wood-based structures while masons build with bricks and stones.
Which of the following plumbing tools has a rubber suction cup attached to a handle that clears clogged drains, toilets, and sinks by creating hydraulic pressure to dislodge blockages?
Pipe threader
Pipe vise
Pipe wrench
Plunger
What classification of Industrial Arts tools does grout float belong to?
Carpentry Tools
Masonry Tools
Plumbing Tools
Tile Setting Tools
What classification of Industrial Arts tools does claw hammer belong to?
Carpentry Tools
Masonry Tools
Plumbing Tools
Tile Setting Tools
What classification of Industrial Arts tools does pipe cutter belong to?
Carpentry Tools
Masonry Tools
Plumbing Tools
Tile Setting Tools
What classification of Industrial Arts tools does drill press belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
What classification of Industrial Arts tools does wire stripper belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
What classification of Industrial Arts tools does multimeter belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
What classification of Industrial Arts tools does soldering iron belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
What classification of Industrial Arts tools does paint brush belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
What classification of Industrial Arts tools does roller frames belong to?
Construction Painting Tools
Electrical Tools
Electronic Tools
Metal Work Tools
