WorksheetsHOT WATER PICTURES QUIZ
Total questions: 42
Worksheet time: 21mins
This picture shows?
A unvented cylinder
A thermal store
A Direct cylinder
A Indirect cylinder
Which method of heat transfer is illustrated on the diagram
radiation
conduction
convection
thermal relaying
This picture shows a?
Immersion heater
Surry flange
Essex flange
Cylinder thermostat
What valve should be installed on the outlet of a cold water cistern
What type of water system is shown?
Indirect hot water cylinder
Single feed hot water
Solar hot water
Instantaneous hot water
What is this tool used for?
Checking flow rate of water
Checking the pressure of water
Checking the PH of water
Checking the temperature of the hot water
The purpose of this valve is to?
Control the water flow to the cylinder
Prevent hot and cold water mixing in the pipe work
Mix hot and cold water to prevent scalding
Prevent the water in the cylinder from reaching above 65 dc
Combination cylinder
What type of hot water stroage vessel is this
Pressurised unvented
Open vented
Combination type
Hot jacket type
What type of hot water storage cylinder is this
Indirect single feed
Primatic
Combination "Fortic"
Double feed unvented
What type of water heater is classed as a localised water heater
What is this device called
A TMV Thermostatic mixing valve
A TSV Thermostatic shower valve
A TRV Thermostatic radiator valve
A TCV thermostatic cylinder valve
A pump is required on a secondary circulation system- what should the pump be made from
Cast Iron
Ferrous metal
Any heating pump will do as long as its metal
Bronze
Identify: Direct hot water cylinder via a boiler.
Identify: Open vented, indirect gravity fed system.
This picture shows a?
Primatic cylinder
Unvented cylinder
Thermal store
Combination boiler
This picture shows a?
Temperature pressure relief valve
Pressure relief valve
Blending valve
Immersion stat
This picture shows a?
Temperature pressure relief valve
Pressure relief valve
Blending valve
Immersion stat
What must be done to prevent one pipe circulation?
The vent should go across at a slight rise for a min of 450 mm.
The vent should go across at a slight fall for a min of 450 mm.
The vent should go straight up from the cylinder.
Two vent pipes should be used.
What is shown in the image?
Vent Pipe
Cold Water takeoff
Parasitic Circulation
High Pressure Vessel
What is shown in the image?
Centralised Hot Water System
Combination Hot Water System
Unvented Hot Water Cylinder
Localised Hot Water System
What is shown in the image?
Hot water Cylinder
Cold Water Storage Cistern
Shower Hopper
Water Tank
This image shows?
A tank connector
A tap connector
A union fitting
A Essex flange
This picture shows
A shower pump
A single impeller pump
A double impeller pump.
A negative head pump
