wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

5357 - Health & Safety - Sample Paper

Total questions: 26

Worksheet time: 13mins

Name
Class
Date
1.

What criteria does an employer have to meet when it becomes a legal requirement to have a written health and safety policy?

a)

Limited company status

b)

Under instruction from the local authority

c)

When employing five or more people

d)

After accident has happened on site

2.

Which regulations require an employer to ensure a power drill they provide an employee is suitable for use?

a)

Current edition of the Building Regulations

b)

Provision and Use of Work Equipment Regulations

c)

Personal Protective Equipment at Work Regulations

d)

Electricity Safety, Quality and Continuity Regulations

3.

Which framework covers the legal disposal of waste solvent glue?

a)

The Electricity at Work Regulations

b)

The Environmental Protection Act

c)

The Hazardous Waste Regulations

d)

The Health and Safety at Work Act

4.

Which legislation allows local authorities to monitor construction sites to ensure the nuisances such as dust and noise are compliant with agreed limits?

a)

The Health and Safety at Work Act

b)

The Electricity at Work Regulations

c)

The Hazardous Waste Regulations

d)

The Control of Pollution Act

5.

What is the immediate action required when a colleague has received a burnt hand when working in a kitchen?

a)

Send for help

b)

Place a dry dressing over the wound

c)

Isolate the supply of heat

d)

Place the wound under running water

6.

What is the immediate action to be taken when a worker has slipped on site and sustained back injury?

a)

Apply emergency first aid

b)

Phone the emergency services

c)

Place them in the recovery position

d)

Try to diagnose the extent of their injuries

7.

Who must be notified immediately when an operative sustains a back injury from carrying a load?

a)

A solicitor

b)

Co-workers

c)

A health centre

d)

The supervisor

8.

What are the most common construction site pollutants of water courses and rivers?

a)

Cement and grout

b)

Oil and silt

c)

Cement and oil

d)

Grout and silt

9.

What regulations specify the requirements for disposal of low pressure sodium lamps?

a)

WEEE

b)

HASWA

c)

EAWR

d)

COSHH

10.

Why is it important to report asbestos immediately if it is suspected as being present?

a)

To prevent unnecessary exposure

b)

To ensure the job is not held up

c)

To prevent completion delay penalties

d)

To comply with RIDDOR

11.

What action is required when a work process is risk assessed as 'High' risk?

a)

Stop the activity immediately and complete set actions

b)

Continue working and complete corrective actions within a week

c)

Continue working and complete corrective actions within a month

d)

Stop the activity within a week and complete set actions

12.

What is the most appropriate action to reduce the risk of harm to workers when damaged asbestos is encountered in a building?

a)

Use barriers around the area in the building affected

b)

Issue all workers with dust masks and safety glasses

c)

Have the asbestos professionally removed immediately

d)

Use sheeting to cover the localised damaged area

13.

What item of PPE must be used when drilling a hole in a steel wall bracket using a pillar drill?

a)

Safety boots

b)

Leather gloves

c)

Safety goggles

d)

Hard hat

14.

What must the first aid provision for a construction site reflect?

a)

The competence of persons employed

b)

The probable injuries expected

c)

The distance from the hospital

d)

The number of first aiders

15.

Why is it important to replace first aid supplies each time they are used?

a)

To comply with COSHH regulations

b)

To comply with RIDDOR requirements

c)

To ensure accidents can be effectively prevented

d)

To ensure resources are always available in case of accidents

16.

What certification defines an operative’s competence to erect a mobile scaffold tower?

a)

EAWR

b)

PASMA

c)

HASWA

d)

ESQCR

17.

What is the main risk to an electrician when safe isolation is not carried out on a live circuit being worked on?

a)

Electric shock caused by direct contact

b)

Electrical shock caused by indirect contact

c)

Electric shock caused by static discharge

d)

Electrical shock caused by electromagnetic interference

18.

What type of hazardous substance is classified by the label shown in the image

a)

Explosive

b)

Harmful

c)

Toxic

d)

Oxidising

19.

What health and safety term defines the potential exposure of a worker to loud noise?

a)

A risk

b)

A hazard

c)

An accident

d)

An occurrence

20.

What is the specific hazard when cables are run in thermal insulation?

a)

Fire

b)

Burns

c)

Explosion

d)

Electric shock

21.

What term defines the situation where an electrician is working at height off a ladder?

a)

A risk

b)

A hazard

c)

An incident

d)

An accident

22.

What practice is employed to address the potential hazard of electrical shock from trailing leads for power tools on construction sites?

a)

Use of 110V centre tapped supplies

b)

Use of 230V single phase supplies

c)

Use of 400V three phase supplies

d)

Use of 500V d.c. single phase supplies

23.

Which type of fire extinguisher is best suited for use on live electrical fires?

a)

Water

b)

Dry powder

c)

Wet chemical

d)

Carbon Dioxide

24.

Which building component is most likely to contain asbestos?

a)

A cistern

b)

Loft insulation

c)

Cavity wall insulation

d)

An unvented hot water cylinder

25.

What is the first action that must be taken when suspected asbestos is identified

a)

Report it to the relevant authorities

b)

Remove it immediately

c)

Ignore it

d)

Cover it with paint

26.

What is the first action you should take if you suspect asbestos is present during refurbishment work of a dwelling?

a)

Obtain appropriate PPE

b)

Seal the suspected material with paint

c)

Remove the affected area and place in bags

d)

Stop work immediately