WorksheetsOnshape Unit 2 Review (long)
Total questions: 40
Worksheet time: 43mins
The Feature List is option ...
A
B
C
D
The Parts List is option ...
A
B
C
D
The Toolbar is option ...
A
B
C
D
The main graphics area is labeled by option ...
A
B
C
D
Which individual sketch tool was used in the sketch below?
Arc
Offset
Fillet
Trim
Which icon is the Line Tool?
Which icon is the Offset Tool, used to draw copies of selected entities at specific distance?
Which icon is the Mirror Tool, used to draw a copy of selected entities about a line
Which icon is Tangent Constraint, that constrains a curve and a line/other curve to be tangent (touch the curve but not cross it)
In the image shown, which axis is normal to the Top plane?
X-axis
Y-axis
Z-axis
None of the above
Sketch entities that are under-defined are displayed in which color?
Blue
Grey
Black
Red
Sketch entities that are fully-defined are displayed in which color?
Blue
Grey
Black
Red
Which tool allows you to define the measurements of your part?
Extension Tool
Label Tool
Number Tool
Dimension Tool
When making an assembly, which feature/tool is used to position instances and connect parts?
Part Studio
Planes
Mates
Joins
True or False:
Onshape is a cloud-based software, meaning changes are saved automatically.
True
False
True or False:
While editing a mate, its alignment cannot be flipped.
True
False
True or False:
A Mate Connector can be placed on a vertex, midpoint of an edge, or the center of circular geometry.
True
False
Use the ________ to mate two entities allowing translational movement along one axis.
Fastened Mate
Revolute Mate
Slider Mate
Planar Mate
Use the ________ to mate two entities allowing rotational movement about one axis.
Fastened Mate
Revolute Mate
Slider Mate
Planar Mate
Which of the following is NOT a tool to turn a 2D sketch into a 3D model?
Which tool transforms hard edges (corners) into rounded edges?
hole
mirror
fillet
loft
What is an assembly in Onshape?
A collection of instances of parts, sketches, surfaces, or subassemblies that define both position and movement.
A feature used to position instances in an assembly and define movement.
A flat, two-dimensional surface that extends infinitely far.
The cube in the top right corner of the graphics area when you open a document.
What measure of a circle is represented by this symbol?
What is the dimension tool?
A tool that tells you the size of a sketch entity.
A specific connection between sketch entities.
A tool that lets you toggle between a guide line and a permanent line in your sketch.
What are constraints?
A tool that tells you the size of a sketch entity.
A specific connection between sketch entities.
A tool that lets you toggle between a guide line and a permanent line in your sketch.
True or False:
A construction line appears as a dashed and dotted line.
True
False
True or False:
This icon hides/unhides layers.
True
False
What is this tool?
Extrude
Sweep
Loft
Revolve
What is this tool?
Extrude
Sweep
Loft
Revolve
What is this tool?
Extrude
Sweep
Loft
Revolve
What is this tool?
Extrude
Sweep
Loft
Revolve
Which term describes the process of adding depth to selected regions in Onshape?
Offset
Extrude
Mirror
Constrained
In Onshape, what does it mean when a sketch is "Constrained"?
It is fully controlled and limits behavior in relation to other entities.
It is a reflection of a sketch entity about a specified line.
It is a set of curves drawn on a plane.
It is a point where all three planes intersect.
What is the term for the distance from one point on a circle through the center to another point on the circle?
Radius
Diameter
Midpoint
Origin
What is the definition of "Origin" in the context of the Onshape application?
A point on a line segment that divides it into two equal parts.
The point where all three planes intersect.
A straight line from the center to the circumference of a circle or arc.
To offset a selected curve or shape at a specified distance and direction.
