Based on the DA Memorandum Order No. 61, s. 2020, full-blown FS is required if the project cost is ____________.

What is the categorization of a Four-wheel Tractor which a 65 rated horsepower.

In accordance to BAFE Technical Bulletin No. 1, Series of 2022, what is the recommended thickness of the concrete slab of a Multi-crop Drying Pavement that can allow vehicles such as 4WD Tractor, Elf Truck, Closed Delivery Truck, and Combine Harvester.

In accordance to BAFE Technical Bulletin No. 2, Series of 2021, what is the minimum recommended floor area of a warehouse for the construction of Rice Processing Center II?

An irrigation system powered by solar energy, consists of one or more solar panels (also known as solar modules or solar plates), a pump, electronic controls or a controller device to operate the pump, storage tank, and conveyance structures as applicable.

An equipment used to change voltage level or waveform, or both, of electrical energy and changes DC input to an AC output. This may be built-in or assembled separately with the pump.

True or False

In accordance with DA MO No. 62, Series of 2021, tractor shall be coupled with at least two (2) implements.

This contains the estimated budget for all Right-of-Way acquisitions costs including inflation and contingencies, schedule of implementation, and the areas to be acquired.

This mode of acquisition is used whenever the property owner refuses or fails to accept the price offer within thirty (30) days for negotiated sale or fails and/or refuse to submit the document necessary for payment, or when negotiation is not feasible.

The minimum carriageway of one-lane and two-lane farm-to-market roads, respectively, excluding the road shoulders, shall be

For concrete farm-to-market roads, the maximum slope from the centerline towards the ditch shall be

In a bituminous farm-to-market road, what course is the third layer from the top?

Which one is a part of a vertical feed mixer?

As a standard, stripping efficiency of the mechanized stripping machine shall be at least

What is the official title of Republic Act No. 10601?

True or False

All agricultural and fisheries machinery assemblers, manufacturers, importers, suppliers, distributors and dealers are required to provide after-sales service and warranty to then respective clients.

Refer to roads linking the agriculture and fisheries production sites, coastal landing points and post-harvest facilities to the market and arterial roads and highways.

ABEMIS stands for:

What is the minimum number of years of active practice required for a registered ABE to qualify as a member of the Professional Regulatory Board of Agricultural and Biosystems Engineering?

Which of the following statement/s accurately reflect/s the rules for passing the ABE Licensure Examination under RA 10915?

1. I. An examinee must obtain a general weighted average of at least 70% to pass.

2. II. An examinee must not receive a grade lower than 55% in any subject to pass outright.

3. III. An examinee who gets below 55% in only one subject but has an overall average of 70% will pass the exam.

True or False

The higher the Nominal Pipe Schedule, the thinner is the pipe wall

It is the determination of the degree of compaction of the soil

It is the computed rate of harvesting in a given area per unit time

What is the component of the rice mill that removes the bran in the brown rice?

True or False

There are three types of huller namely, under-runner stone disc, rubber roll, and centrifugal type.

True or False

The minimum hulling efficiency of a single pass rice mill is 65%.

The following are the minimum requirements to be submitted by the recipient as stated in MC No. 41, S.2024, except?

True or False

Provincial, City, and Municipal Local Government units are considered qualified AMEFIP recipients as stated in MC No. 41, series of 2024.

It is the ratio of the weight of clean grains to the total weight of unclean grains sample, expressed in percent.

Identify the part of the mechanical rice thresher shown:

What is the type of wheel-track of a four-wheel tractor with a center to center distance between two front or rear wheels as shown in figure:

Dryer in which product of combustion come into direct contact with the product being dried

True or False

The minimum threshing recovery of a mechanical rice thresher is 90%.

It is a farm, practicing applicable agricultural technologies, employing doable farming strategies and operating successfully, thus, worthy of emulation. The farmer/ farm family -owner is relatively advanced compared to the rest of the farmers.

True or False

Steel bars and metal sheets should be generally used for the manufacture of the different components of a rice combine harvester?

What is an oscillating structure which supports the cleaning sieve(s) and which may also support the chaffer and the chaffer extension?

Based on PNS/BAFS 330:2022, this is a type of guard that protects the machinery by covering it from all sides, preventing access from unauthorized personnel and keeping the operator at a distance.

Based on PNS/BAFS 358:2023, for the tilt-type egg incubator, the eggs shall be tilted at what angle?

The certificate of conformity is a certificate being issued by BAFE which guarantees that the agricultural and fisheries machinery conforms with PNS/PABES and other relevant standards. What is the validity of the issued CC?

It is an entity that produces agricultural and fishery machinery from conceptualization, prototyping, testing, commissioning, and eventually selling. Usually, it produces agricultural machinery and equipment in bulk.

The following are the criteria for the accreditation of an agricultural machinery testing center EXCEPT for:

The Testing and Evaluation Accreditation Advisory Committee was created to review and recommend the granting of CC and CoA, among others. Which of the following government agency is not part of the TEAAC?

This is a level of testing that validates the performance of a complete and fully integrated several machines or facilities such as SPIS, RPC among others.

Annex A of DC No. 2 series of 2023 was issued to classify various machinery and equipment used in agriculture. In 2024, this was amended through the issuance of DC No. 04 to reclassify which machinery as garden tool/equipment?

Based on PNS/BAFS PABES 245:2018, which of the following statement is TRUE for a cassava granulator?

If there are changes in business address for the issued PTO, is the supplier required to apply for the amendment of PTO?

It is a type of coffee machinery that is used to remove and separate the soft pulp of ripe coffee cherries without making any damage to the parchment coffee.

Based on PNS/BAFS PAES 190:2018, the following are types of a cacao grinder grinding mechanism EXCEPT?

Based on the National Guidelines for the Registration of Ownership of Agricultural and Fisheries Machinery and Equipment, how much shall be the cost of the registration fee?