wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

AVION TIPO p2

Total questions: 55

Worksheet time: 28mins

Name
Class
Date
1.

What does PITOT HEAT B control?

a)

FO pitot, right elevator, right alpha, and auxiliary pitot

b)

FO pitot, left elevator, left alpha, and TAT

c)

Captain’s pitot, right elevator, left alpha, and TAT

2.

What is the purpose of the ice and rain protection system?

a)

To prevent ice formation on critical airplane parts

b)

To promote ice formation on critical airplane parts

c)

To present ice formation on critical airplane parts

3.

Which system uses pneumatic de-icing?

a)

Wing leading edges and engine cowls

b)

Flight deck windows and water lines

c)

Pitot probes and alpha vanes

4.

Which probes are heated electrically?

a)

Pitot, TAT, and Alpha vanes

b)

Windshields, pitot, and wing edges

c)

Cowl inlets, TAT, and wing edges

5.

Where is the main control panel for anti-icing located?

a)

Overhead panel P5

b)

Overhead panel P7

c)

Overhead panel P3

6.

What does the abbreviation TAI stand for?

a)

Thermal Anti-Ice

b)

Terminal Anti-Ice

c)

Tunnel Anti-Ice

7.

What does CTAI refer to?

a)

Cowl Thermal Anti-Ice

b)

Cowl Thermal Anti-Item

c)

Cowl Thermal Anti-Ink

8.

How are the flight deck windows heated?

a)

Electrically via Window Heat Control Units (WHCU)

b)

Pneumatically via hot bleed air

c)

Mechanically via air scoops

9.

Which windows are monitored by thermal switches only?

a)

Windows No. 3, 4, and 5

b)

Windows No. 1 and 2

c)

Windows No. 2, 4, and 6

10.

What component performs window overheat detection and power control?

a)

WHCU (Window Heat Control Unit)

b)

CPU (Cabin Processing Unit)

c)

WTCU (Window Thermal Control Unit)

11.

What does the amber OFF light on the window heat panel mean?

a)

No power is being supplied to the window

b)

The window is frozen

c)

The window is broken

12.

What causes the amber OVERHEAT light to illuminate?

a)

Window exceeds temperature limit

b)

Pitot probe fails

c)

Probe is unplugged

13.

What action resets an OVERHEAT condition in window heat?

a)

Switch OFF momentarily, then ON again

b)

Hold the switch in test for 10 sec

c)

Turn off battery power

14.

How many pitot probes are on the aircraft?

a)

5

b)

3

c)

7

15.

How many alpha vanes are installed?

a)

2

b)

4

c)

1

16.

Which systems use 115V AC and 28V DC power?

a)

Alpha vane and TAT probe

b)

Window and windshield wipers

c)

TAT and static ports

17.

Which control panel manages pitot/static heating?

a)

P5-9

b)

P3-7

c)

P6-2

18.

How are the air data probes (pitot, alpha vane, TAT) heated?

a)

Electrically

b)

Hydraulically

c)

Thermally with oil

19.

What does PITOT HEAT A control?

a)

Captain’s, left elevator, left alpha, and TAT

b)

Captain’s, right elevator, left alpha, and TAT

c)

First officer’s, left elevator, right alpha, and TAT

20.

What element fails when the probe stops drawing current?

a)

Heating element

b)

Signal amplifier

c)

Temperature switch

21.

What is the function of the OVHT/PWR TEST switch?

a)

Simulates power and overheat for windows 1 and 2

b)

Resets probe heating systems

c)

Tests rain removal system

22.

Where is the TAT probe located?

a)

Left forward fuselage

b)

Right wing root

c)

Rear vertical fin

23.

What makes the aspirated TAT probe unique?

a)

Uses engine bleed air to simulate ambient temperature even on ground

b)

Uses electric fans to draw in air

c)

Heats up to simulate icingHeats up to simulate icing

24.

What does WATDAI protect?

a)

Water and toilet drains

b)

Windshields and antennas

c)

Wheels and tail fins

25.

What prevents icing in water/waste system lines?

a)

Electrical heating

b)

Pneumatic valves

c)

Hydraulic coils

26.

What is the purpose of the windshield wiper system?

a)

Clear rain/sleet/snow from cockpit windows

b)

Wash windows with alcohol

c)

Reduce airflow drag

27.

What are the three windshield wiper settings?

a)

INT, LOW, HIGH

b)

INT, SLOW, FAST

c)

ON, OFF, HIGH

28.

What happens if wipers are used on dry windows?

a)

Scratches glass and damages coating

b)

Increases visibility

c)

Reduces electrical load

29.

What should be used to clean hydrophobic coatings?

a)

50% isopropanol with distilled water

b)

Pure alcohol

c)

Vinegar and water

30.

What acronym is used to refer to the heating of engine inlet cowls?

a)

CTAI

b)

CHTI

c)

CHAI

31.

Which system uses WHCU to manage window heat?

a)

Control cabin windows No. 1 and 2

b)

Passenger cabin side windows

c)

Landing gear heaters

32.

Which acronym represents the component that monitors window heat and controls power output?

a)

WHCU

b)

WTCU

c)

WCHU

33.

What does WATDAI refer to?

a)

Water and Toilet Drain Anti-Ice

b)

Window and Tail Door Anti-Ice

c)

Wing and Tail Deicing Arrangement

34.

What does WTAI stand for?

a)

Window Heat Control Unit

b)

Window Heat Circuit Unit

c)

Windshield Heating Control Unit

35.

What does TAI refer to in the context of anti-icing?

a)

Thermal Anti-Ice

b)

Temperature Anti-Ice

c)

Turbine Anti-Ice

36.

What does CTAI stand for?

a)

Cowl Thermal Anti-Ice

b)

Cold Thermal Anti-Ice

c)

Core Thermal Anti-Ice

37.

What is the meaning of WHCU?

a)

Windshield Heat Control Unit.

b)

Window Heat Control Unit.

c)

Windshield Heat Cabin Unit.

38.

How many Windows are heated by the WHCU system?

a)

3

b)

2

c)

5

39.

How many Pitot Probes are heated by the ADP system?

a)

2

b)

3

c)

5

40.

How many Drain mast does the B737-600 have?

a)

3

b)

2

c)

5

41.

How many positions is the pitot probe switches?

a)

Two positions low and high.

b)

Three positions on of Light.

c)

Two positions ON and OFF.

42.

There are two types of TAT probes available:

a)

Rossmount type probe and Warm type probe

b)

Vane type probe and Aspirated type probe

c)

Rossmount type probe and Aspirated type probe.

43.

Where is the TAT located?

a)

Is on the R/T side of the forward fuselage.

b)

Is on the L/T side of the forward fuselage.

c)

Is on the C/T side of the forward fuselage.

44.

What are the 2 air data probe systems?

a)

PITOT HEAT A, PITOT HEAT B.

b)

PITOT A, PITOT PROBE ANTI-ICING SYSTEM.

c)

PITOT B, PITOT STATIC CONTROL.

45.

What kind of anti-ice system does the TAT probe use?

a)

It uses electric power and resistance type heating elements to warm the probe.

b)

It uses electric power and heating elements to warm the probe.

c)

It uses bleed air and resistance type heating elements to warm the probe.

46.

The indication light system is divided into two banks:

a)

A system and one for D system.

b)

A system and one for B system.

c)

A system and one for C system.

47.

What are the 3 types of anti.ice?

a)

Cowl thermal anti-ice, Thermal anti-ice, Wind thermal anti.ice.

b)

Cold thermal anti-ice, System anti-ice, Wing thermal anti-ice.

c)

Cowl thermal anti-ice, Thermal anti-ice, Wing thermal anti-ice.

48.

What are the characteristics to improve the visión in heavy rains?

a)

Wing wipers, Hydrosystemc (rain repellent) coatings

b)

Windshield wipers, Hydrophobic (rain repellent) coatings.

c)

Windshield wipers, Hydrophobic (rain static) system.

49.

If the element of TAT falls you must:

a)

Testing the probe.

b)

Clean the probe.

c)

Replace the probe.

50.

WHCUs are part of?

a)

The control pitot anti-icing system.

b)

The control cabin window anti-icing system.

c)

The control heating window anti-icing system.

51.

In which part of the aircraft are located the anti-ice and rain systems?

a)

Wing ice protection, Engine air intake ice protection, probe ice protection, windshield ice and rain protection, etc.

b)

Wing ice protection, APU air intake ice protection, static probe ice protection, windshield ice and rain protection, etc.

c)

Wing ice protection, Engine air intake ice protection, air data probe ice protection, windshield ice and rain protection, etc.

52.

How many computers WHCU does the B737-800 have?

a)

4

b)

2

c)

3

53.

Airplanes without window #4 and #5 intalled, do not have electrical wires and installations those windows.

a)

TRUE.

b)

FALSE.

c)

I HAVE NO IDEA.

54.

Do not operate the wipers on dry windshields, this can do these things: Scratch the Windows.

a)

TRUE.

b)

FALSE.

c)

I HAVE NO IDEA.

55.

What is the static port pitot that does not need to be heated?

a)

Because the static system sense ports are not part of the anti-ice system.

b)

Because the static system sense ports have it self anti-ice system.

c)

Because the static system sense ports.