Font size
Worksheetssimon roofing
Total questions: 24
Worksheet time: 19mins
What Are The 3 Safe ladder Practices enforced with zero tolerance
4 rungs above , 3 points of contact, tied off
4:1
Stable ladder
When rungs go from 2 to 1
Name the top 4 fall hazards you face while carrying a ladder and how to mitigate each one
Wind ; do not setup if not safe and call safety
Power lines ; walk the path before carrying ladder
Low tree branches
Trip hazard
Name the top 4 fall hazards you face while climbing up / down a ladder and how to mitigate each one
Unstable ladder; proper setup on flat stable surface
When rungs go from 2:1 ; 3 points of contact look before you step
Last step of ladder ; 3 points of contact look before u step
Getting on / off ladder at the top / watch your step slow down
What types of ladders should you inspect before each use
Any ladder you use while doing work
Inspect portable and fixed ladders before every use
A frame ladder
Fixed ladders
Explain how to inspect a ladder
Inspect side rails and every rung for damage
Do not use and call safety
Let store mod know and barricade it with cones and caution tape
A frame can’t be leaned open position only
If a ladder does not pass inspection what should you do
Tag it and send it
Do not use and call safety
Pulling up material
Swing falls
If a ladder has to be set up in a high traffic area what should you do
Let store M.O.D know and barricade it with cones and caution tape
Step ladder must be set up A frame
Pwls on all 4 sides no gaps
Skylights / openings
How must a step ladder be set up
Step ladder must be set up A frame ( can’t be leaned) open position only
Leaning on wall
Bad decking
Gas lines , pvc pipes, any unit without pic points
You are required to be tied off while
(a)
What are the 3 other acceptable methods of fall protection besides tying off
(a)
You are always required to be tied off when
(a)
In addition, you are always required to be tied of when
Pulling up material, tools , etc
Opening 2” or greater, unguarded skylights
Replacing decking
In a lift
Do fall protection rules apply when making temporary repairs
(a)
Name the Top 3 fall hazards you face on the roof and how to mitigate each one
Bad decking; inspect from underneath
Skylight/opening ; inspect from underneath
Working near the edge ; tie off 45 degrees angle prevent swing falls
Pic points on large units
Name the top 3 fall hazards you face on the roof and how to mitigate each one
(a)
Name 3 anchor points that support 5,000 lbs
(a)
Name 3 anchor points that are never acceptable because they do not support 5,000 lbs
(a)
When do you need a second anchor point
(a)
Using a second anchor point prevents
Swing falls
6:00 am - 8:30 pm ( out of town )
4:30am -10:30 pm
Follow the speed limit
When are you required to enter safety photos in prevision
(a)
Are you required to add safety photos in prevision when making temporary repairs
(a)
List the 6 fleet safety rules
No personal use of fleet
Only Simon employees
Follow speed limit
Hand free driving
Driving hours 4:30 am -10:30 pm ( in town)
6:00am -8:30pm ( out of town)
What are the 3 safe ladder practices enforced with zero tolerance
(a)
Top 4 fall hazards while climbing ladder
(a)
