WorksheetsFSS25 Kick-off
Total questions: 16
Worksheet time: 8mins
What must TSAL do when TS is active?
Beep
Flash green
Flash red
Be off
When is the Brake Test performed?
After completing all other scrutineering inspections
Before the electrical inspection
It is not mandatory
Before any mechanical inspection
What is the consequence of damaging a seal applied during inspection?
The part is flagged but remains approved
10-point penalty
Vehicle must be reinspected only for that component
Technical inspection approval becomes void
What is the penalty if a part of the vehicle detaches during a dynamic event?
10-point penalty
Disqualification for the run
Re-inspection required
Warning
How long must the car remain stable after water spray stops for the Rain Test to be passed?
30 seconds
60 seconds
90 seconds
120 seconds
What determines if an item on the inspection sheet is validly visible?
A mirror or camera may be used
It must be seen directly without instruments
It must be reachable without removing bodywork
Officials must access it without tools
What penalty applies for a weight change of over 6.2 kg after inspection?
20 points
40 points
Disqualification
Retesting required
What condition must be verified before starting the Rain Test?
Rain simulation system must log water temperature
Rain is forecast for some of the dynamic events
Driven wheels are removed and vehicle is stable
Brake test must be completed
When does any modification to the aerodynamic elements require re-inspection?
If mounting bracket is tightened
If angle is altered
If entire device moves relative to chassis
Which documents must be available for accumulator parts without serial numbers printed on them?
No additional requirement
Original delivery notes
Test logs
CAD files
What is the minimum surface area required for HV insulating blankets?
0.25 sq.m
0.5 sq.m
1 sq.m
1.5 sq.m
What item is needed at mechanical inspection for teams using steel alloys?
FEA report
Alloy batch certificate
Physical test specimen
Hardness data
Which engine modification is permitted after mechanical inspection?
Adjusting fuel mixture and ignition timing
Replacing the engine with a new one
Replacing the intake manifold
Tuning the turbo pressure
Which condition is not required to allow engine running or hybrid system activation (engine test and dinamic area)?
Removing the driven wheels
Passing mechanical inspection
The vehicle must be jacked using the jacks
Driver wearing the required equipment
Which of the following is NOT required in an EV push bar while the car is running?
No items are mandatory while the car is running
The inspection sheet
A fire extinguisher
HV gloves
What ASSI state indicates that a DV car is in emergency state:
Yellow continuous
Blue flashing
Red flashing
Blue continuous
