wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Soal Working At Height CGL 2 (Eng. Ver)

Total questions: 25

Worksheet time: 13mins

Name
Class
Date
1.

What is meant of working at height?

a)

Work performed on the ground

b)

Work performed by workers at different heights, with the potential for falls, injury, death, and property damage

c)

Work performed indoors

d)

Work performed with heavy equipment

2.

The function of the lifeline in a work at height system is…

a)

As a place to store tools

b)

For variety

c)

As a safety path to connect workers to anchor points

d)

As a height measuring tool

3.

The tool in this image is used by workers at heights as...

a)

It is used for workers to ascend and descend when working at height.

b)

It is used when lifting objects and is also commonly used during casualty evacuations to reduce labor.

c)

It is used for workers to move from one location to another or cross the road when working at height.

d)

It is used for descending during emergencies.

4.

What to do in case of bad weather (Like a strong winds) when working at height…

a)

Continue work with caution

b)

Work quickly

c)

Stop work and descend to a safe place

d)

Ignore the weather

5.

Permanent anchors must be able to support a minimum load of…

a)

22 tons

b)

15 tons

c)

22 kilonewtons

d)

15 kilonewtons

6.

Of these two images, which number shows 3 points of contact?

a)

Number 1

b)

Number 2

c)

Both are correct

d)

Both are incorrect

7.

What should workers do if they experience vertigo or dizziness while working at heights…

a)

Work quickly

b)

Ignore vertigo

c)

Continue work as best as possible

d)

Take a short break, descend if possible, and seek medical attention

8.

The regulations specifically governing safety and health when working at heights are…

a)

Minister of Manpower Regulation No. 9 of 2010

b)

Minister of Manpower Regulation No. 8 of 2016

c)

Minister of Manpower Regulation No. 9 of 2016

d)

Minister of Manpower Regulation No. 2 of 2016

9.

What PPE must be worn by workers at heights…

a)

Full body harness with single hook

b)

Full body harness

c)

Ladder

d)

Full body harness with double hook

10.

What is meant by a double lanyard safety system?

a)

As a tool storage device

b)

As a variation

c)

A height measuring device

d)

A safety harness system used to secure workers to two different safety points

11.

Of these two images, which number represents a temporary work floor?

a)

Number 1

b)

Number 2

c)

Both are correct

d)

Both are incorrect

12.

If an object falls from a height, what should you do?

a)

Find the object

b)

Continue work

c)

Stop work and ensure the area is safe, then notify to supervisor

d)

Have someone else for search it

13.

What is meant by a rescue plan for high-altitude workers?

a)

Marketing strategies for construction companies

b)

Plans to increase manpower

c)

Plans to reduce risks and rescue workers in the event of an accident

d)

Company strategies to intimidate workers

14.

The potential for falling objects is regulated in Ministerial Regulation No. 9 of 2016, which states that workers are only permitted to carry objects weighing…

a)

10 kg

b)

8 kg

c)

5 kg

d)

6 kg

15.

What is the name of this scaffolding component?

a)

Main Frame

b)

Jack Base

c)

Arm Lock

d)

Cross Brance

16.

Do high-altitude workers need to take breaks while working?

a)

No, they have to work

b)

Only if the weather is bad

c)

Depends on whether the job has a deadline or not

d)

Necessary to prevent fatigue

17.

What is the name of the collective fall arrest device in the image below?

a)

Full body harness with single hook

b)

Full body harness with double hook

c)

Safety net and airbag

d)

Anchorage and connecting means

18.

According to Ministerial Regulation No. 9 of 2016, Article 1, paragraph 7, a permanent work floor is defined as…

a)

A surface constructed or made available for temporary use.

b)

A surface constructed or made available for repeated use over a long period.

c)

A surface constructed or made available for temporary vehicular traffic.

d)

A surface constructed or made available for personal and temporary use.

19.

According to Ministerial Regulation No. 9 of 2016, Article 1, paragraph 8, a temporary work floor is defined as…

a)

A surface constructed or made available for short-term use, limited to specific work, or with the potential for collapse.

b)

A surface constructed or made available for repeated use for long duration

c)

Surfaces constructed or available for private and permanent use

d)

Surfaces constructed or available for vehicular traffic

20.

In this image, the fall factor 1 is shown by…

a)

A

b)

B

c)

C

d)

NONE

21.

The EN Standard states that the maximum impact force the human body can withstand is…

a)

7kN (±700kg) for a body weight between 90-100kg and 5kN for a body weight between 60-80kg

b)

6kN (±600kg) for a body weight between 80-100kg and 4kN for a body weight between 50-80kg

c)

5kN (±500kg) for a body weight between 50-100kg and 3kN for a body weight between 40-80kg

d)

4kN (±400kg) for a body weight between 70-100kg and 2kN for a body weight between 40-80kg

22.

What color tagging is used if the scaffolding is installed and ready for use?

a)

Red

b)

Yellow

c)

Green

d)

Blue

23.

The name of the tool in this image is…

a)

Weighing scale

b)

Fire alarm

c)

Chain block

d)

Self-retracting climbing mechanical fall arrester

24.

A rope that has a low stretch of 5-8% and functions as a work rope or safety rope is…

a)

Dynamic rope

b)

Static rope

c)

Collective rope

d)

Individual rope

25.

In this image, is it permissible to push or pull the scaffolding during an activity or work…

a)

Yes, because you have experience?

b)

No

c)

Yes, as long as a full-body harness with a double hook hang it

d)

It's okay if there's no safety team.